TRANSPORT OF DANGEROUS GOODS BY ROAD AND RAIL (NATIONAL UNIFORM LEGISLATION) REGULATIONS 2011

1 Citation These Regulations may be cited as the Transport of Dangerous Goods by Road and Rail (National Uniform Legislation) Regulations 2011.

2 Commencement These Regulations commence on the commencement of the Transport of Dangerous Goods by Road and Rail (National Uniform Legislation) Act 2010.

3 Objects The objects of these Regulations are: (a) to set out the obligations of persons involved in the transport of dangerous goods on land; and (b) to reduce, as far as practicable, the risks of personal injury, death, property damage and environmental harm arising from the transport of dangerous goods on land; and (c) to give effect to the standards, requirements and procedures of the ADG Code so far as they apply to the transport of dangerous goods on land; and

Regulations 2011 2 (d) to promote consistency between the standards, requirements and procedures applying to the transport of dangerous goods by land transport and other modes of transport.

4 Definitions In these Regulations: adequate insurance, for Part 14, see regulation 147. ADG Code, see regulation 4A. administrative determination means a determination that applies to one or more persons under Part 18. aggregate quantity, in relation to a load containing dangerous goods, means the total of: (a) the number of kilograms of solid dangerous goods in the (b) the number of kilograms of articles that are dangerous goods, including aerosols, in the load; and (c) the number of litres or kilograms (whichever is used in the transport documentation for the load) of liquid dangerous goods in the load; and (d) the total capacity in litres of receptacles in the load containing dangerous goods of UN Class 2 that are not aerosols. appropriately marked, see regulation 66. appropriately placarded, see regulation 70(3). approval means an approval granted by the Competent Authority under regulation 59, 63, 101, 102, 126, 151 or 160 and in force. approved packaging means: (a) packaging of a design that is approved under regulation 59; or (b) foreign approved packaging.

Regulations 2011 3 approved tank, for Part 15, Division 4, see regulation 170. article, see regulation 4B. bulk container, see regulation 5. bulk transfer, for Part 9, see regulation 103. CAP means the Competent Authorities Panel established by the Competent Authorities Panel Rules made by the National Transport Commission on 13 June 2008, as amended from time to time. capacity, in relation to packaging, means the total internal volume of the packaging at a temperature of 15 °C, expressed in litres or cubic metres. cargo transport unit means: (a) a road transport tank or freight vehicle; or (b) a railway transport tank or freight wagon; or (c) a multimodal freight container; or (d) a portable tank; or (e) an MEGC. Category, see regulation 17. corresponding approval means an approval that has effect in the Territory under regulation 226. corresponding dangerous goods driver licence means a licence that has effect in the Territory under regulation 227 and was granted under a provision that corresponds to regulation 162. corresponding dangerous goods vehicle licence means a licence that has effect in the Territory under regulation 227 and was granted under a provision that corresponds to regulation 173. corresponding determination means a determination that has effect in the Territory under regulation 224. corresponding exemption means an exemption that has effect in the Territory under regulation 225.

Regulations 2011 4 dangerous goods driver licence means a licence granted under regulation 162. Dangerous Goods List means the list set out in Section 3.2.3 dangerous goods vehicle licence means a licence granted under regulation 173. demountable tank means a tank, other than a portable tank, that is designed to be carried in or on a vehicle but that does not form part of and is not permanently attached to the vehicle and is designed to be removable. determination means a determination made by the Competent Authority under Part 16 that is in force. driving licences register, of a State or Territory, means a register kept by the driver licensing authority of the State or Territory containing information about any licence authorising the licensee to drive a road vehicle. emergency service means: (a) an ambulance, fire, police or other emergency service of a participating jurisdiction; or (b) a unit of the Defence Force corresponding to a service mentioned in paragraph (a). food includes: (a) a substance prepared or intended for human or animal consumption; and (b) a substance (except dangerous goods) intended to be an ingredient of food. food packaging means: (a) a receptacle that contains, or is designed or intended to contain, food; or (b) material designed or intended to be used in a receptacle that is designed or intended to contain food. foreign approved, see regulation 6.

Regulations 2011 5 freight container means a re-useable container of the kind mentioned in Australian/New Zealand Standard AS/NZS 3711 that is designed for repeated use in the transport of goods by one or more modes of transport. freight vehicle means a vehicle used to transport freight by road. freight wagon means a rail wagon used to transport freight by rail. general packaging, for Part 3, Division 2, see regulation 37. holder, for Part 18, see regulation 206. hose assembly means a hose, or hoses connected together, for use in the transfer of dangerous goods to or from a tank in or on a vehicle, portable tank or storage receptacle and includes: (a) if there are 2 or more hoses connected together – the connections between the hoses; and (b) the attachment connecting the hose or hoses to the tank; and (c) anything else (except the vehicle, portable tank or storage receptacle) attached to the hose or hoses. IBC or intermediate bulk container, see regulation 7. ICAO Technical Instructions means the Technical Instructions for the Safe Transport of Dangerous Goods by Air published by the International Civil Aviation Organisation. IMDG Code means the International Maritime Dangerous Goods Code published by the International Maritime Organisation. incompatible, see regulation 20. infringement notice, for Part 20, see regulation 232. infringement notice offence, for Part 20, see regulation 231(1). inner packaging, in relation to dangerous goods for which outer packaging is required for transportation, means any packaging that is, or is to be, contained or protected by the outer packaging.

Regulations 2011 6 journey means the transport of dangerous goods from where the goods are consigned to where the goods are delivered to the consignee. large packaging means outer packaging that: (a) is designed for mechanical handling; and (b) has a capacity of not more than 3 m3; and (c) is intended to contain articles or inner packaging with: (i) a net mass of more than 400 kg; or (ii) capacities totalling more than 450 L. licence means a dangerous goods driver licence or a dangerous goods vehicle licence. licensee means the holder of a licence. licensing authority means: (a) the Competent Authority; or (b) a person or body authorised by the Competent Authority under regulation 154. load, as a noun, see regulation 8. MEGC or multiple-element gas container, see regulation 9. multimodal means applicable to, or suitable for use in or on, more than one mode of transport. NATA, for Part 3, Division 6, see regulation 58. nominally empty storage vessel, for Part 6, Division 3, see regulation 88A. other packaging, for Part 3, Division 3, see regulation 43. outer packaging means external packaging (including absorbent materials, cushioning and any other components) necessary for the purposes of transport to contain and protect: (a) articles; or (b) receptacles in composite packagings, as defined in Section 1.2.1.1 of the ADG Code; or

Regulations 2011 7 (c) inner packaging in combination packagings, as defined in Section 1.2.1.1 of the ADG Code. overpack means packaging (other than large packaging) used to hold and consolidate packages of goods into a single unit for easier handling and stowage. Examples for definition overpack 1 A pallet, together with strapping or shrink wrapping, designed to hold packages. 2 A box or crate into which packages are placed. packed in excepted quantities, see regulation 9A. packed in limited quantities, see regulation 10. Packing Group, see regulation 18. participating jurisdiction means: (a) the Territory; or (b) a State or another Territory that has a corresponding law. placard load means a load containing dangerous goods that must be placarded under regulation 71. placarded, see regulation 70(2). portable tank means a multimodal tank that: (a) is designed primarily to be loaded into or onto a vehicle or ship; and (b) has a capacity of more than 450 L; and (c) is equipped with skids, mountings, stabilizers and accessories to facilitate mechanical handling; and (d) is capable of being loaded and unloaded without removing its service equipment or structural equipment; and (e) is capable of being lifted when full. prescribed amount, for Part 20, see regulation 231(2). prescribed fee, for a matter, means the fee (if any) for that matter, set out in Schedule 1.

Regulations 2011 8 pressure drum means a welded transportable pressure receptacle with a water capacity exceeding 150 L but not exceeding 1 000 L. prime mover, for Part 15, Division 4, see regulation 170. rail wagon means a unit of rolling stock that: (a) is designed to carry freight by rail; and (b) bears a unique identifying number or alphanumeric identifier. railway transport tank means a tank used to transport goods by rail. ratio goods, for Part 9, Division 3, see regulation 109. receptacle, in relation to a substance or article, means a container that is: (a) for receiving and holding the substance or article (including anything that enables the container to be closed); and (b) in contact with the substance or article. recognised testing facility, for Part 3, Division 6, see regulation 61. register means any of the following: (a) the register of dangerous goods driver licences under regulation 184(1); (b) the register of dangerous goods vehicle licences under regulation 184(2); (c) the register of determinations under regulation 199(1); (d) the register of exemptions under regulation 202(1); (e) the register of approvals under regulation 213(1). registered, in relation to any thing other than registration of a road vehicle, means registered under a Commonwealth, State or Territory law. relevant provision of Part 4 of the ADG Code, for Part 3, see regulation 34.

Regulations 2011 9 required emergency information, for Part 10, Division 2, see regulation 120. risk means risk of personal injury, death, property damage or harm to the environment. road transport tank means a tank used to transport goods by road whether or not the tank is an integral part of a vehicle. segregation load, for Part 8, see regulation 93. service equipment, in relation to a tank or MEGC, see Section 6.7.2.1, 6.7.3.1.2, 6.7.4.1.2 or 6.7.5.1.2, as appropriate, special provision, for Part 2, see regulation 27(1). structural equipment, in relation to a tank or MEGC, see Section 6.7.2.1, 6.7.3.1.2, 6.7.4.1.2 or 6.7.5.1.2, as appropriate, subsidiary hazard, see regulation 19. tank, see regulation 11. tank vehicle means a road vehicle or unit of rolling stock: (a) of which a tank forms part; or (b) to which a tank (other than a portable tank) is attached. tube means a seamless transportable pressure receptacle with a water capacity exceeding 150 L but not exceeding 3 000 L. ullage, means ullage as defined in Section 1.2.1 of the ADG UN Class, see regulation 17. UN Division, see regulation 17. unsuitable, for Part 3, see regulation 35. vehicle, for Part 15, Division 4, see regulation 170.

4A Meaning of ADG Code (1) The ADG Code is the Australian Code for the Transport of Dangerous Goods by Road and Rail approved by the Ministerial Council, as in force from time to time.

Regulations 2011 10 (2) Despite subregulation (1), if the Code specified in subregulation (1) is remade, ADG Code is that remade edition and any reference in these Regulations to a provision of that Code extends to the corresponding provision (if any) of the remade Code.

4B Meaning of article (1) An article is a manufactured item, other than a fluid or particle, (a) is formed into a particular shape or design during manufacture; and (b) has hazard properties that are, and a function that is, wholly or partly dependent on that shape or design. (2) For subregulation (1), article includes batteries, aerosols, gas- filled lighters, seatbelt pre-tensioners and refrigerating machines.

5 Meaning of bulk container (1) A bulk container is a container (with or without a liner or coating) that: (a) has a capacity of 1 m3 or more; and (b) is intended for use in the transport of solid dangerous goods that are in direct contact with the container. (2) Each of the following is not a bulk container: (a) large packaging that complies with the requirements of

Chapter 6.6 of the ADG Code; (b) an IBC; (c) a tank; (d) a tank vehicle; (e) any other packaging that complies with the requirements of Chapter 6.1 or 6.3 of the ADG Code.

6 Meaning of foreign approved (1) In these Regulations: foreign approved, in relation to packaging (including a tank), means packaging that has the markings required by Part 6 of the ADG Code for packaging of its type, in confirmation that the

Regulations 2011 11 packaging is ADR approved, ICAO approved, IMO approved, RID approved or UN approved. ADR approved means approved in accordance with the European Agreement Concerning the International Carriage of Dangerous Goods by Road published by the Inland Transport Committee of the Economic Commission for Europe. ICAO approved means approved in accordance with the Technical Instructions for the Safe Transport of Dangerous Goods by Air published by the International Civil Aviation Organisation. IMO approved means approved in accordance with the IMDG RID approved means approved in accordance with the International Regulations Concerning the Carriage of Dangerous Goods by Rail published by the Inland Transport Committee of the Economic Commission for Europe. UN approved means approved in accordance with the United Nations Model Regulations for the Transport of Dangerous Goods published by the United Nations.

7 Meaning of IBC or intermediate bulk container (1) An IBC or intermediate bulk container is rigid or flexible portable packaging for use in the transport of dangerous goods (a) complies with the specifications in Chapter 6.5 of the ADG Code; and (b) has a capacity of not more than: (i) for solids of Packing Group I packed in a composite, fibreboard, flexible, wooden, or rigid plastics container – 1 500 L; and (ii) for solids of Packing Group I packed in a metal container – 3 000 L ; and (iii) for solids or liquids of Packing Groups II and III – 3 000 L; and (iv) for any other dangerous goods – 3 000 L; and

Regulations 2011 12 (c) is designed for mechanical handling. (2) Rigid or flexible portable packaging that complies with the requirements of Chapter 6.1, 6.3 or 6.6 of the ADG Code is not an IBC.

8 Meaning of load Without limiting the meaning of load: (a) for goods in or on a road vehicle – all the goods in or on the vehicle constitute a single load; and (b) for goods in or on rolling stock – all of the goods in or on each cargo transport unit that is in or on the rolling stock constitutes a separate load.

9 Meaning of MEGC or multiple-element gas container An MEGC or multiple-element gas container is a multimodal assembly of cylinders, tubes and bundles of cylinders that are interconnected by a manifold and assembled within a framework, including the device and structural equipment necessary for the transport of gases in the cylinders and tubes.

9A Meaning of packed in excepted quantities Dangerous goods are packed in excepted quantities if: (a) the goods are assigned to code E1, E2, E3, E4 or E5 in column 7b of the Dangerous Goods List; and (b) the goods are packed in compliance with Chapter 3.5 of the ADG Code; and (c) the quantity of dangerous goods does not exceed the quantity specified in section 3.5.1.2 of the ADG Code.

10 Meaning of packed in limited quantities Dangerous goods are packed in limited quantities if: (a) the goods are packed in compliance with Chapter 3.4 or 3.5 of the ADG Code; and (b) the quantity of dangerous goods in each inner packaging or in each article that is dangerous goods does not exceed the quantity mentioned in column 7a of the Dangerous Goods List for those goods.

Regulations 2011 13

11 Meaning of tank (1) A tank is a receptacle for receiving and holding dangerous goods, including any service equipment or structural equipment that enables the receptacle to transport those goods. (2) A receptacle for receiving and holding dangerous goods of UN Class 2 is not a tank unless it has a capacity of more than 450 L. (3) Each of the following is not a tank: (a) packaging that complies with the requirements of Chapter 6.1, 6.3 or 6.6 of the ADG Code; (b) an IBC; (c) an MEGC; (d) a cylinder; (e) a pressure drum; (f) a tube; (g) a bulk container that complies with the requirements of Chapter 6.8 of the ADG Code.

12 References to codes, standards and rules (1) In these Regulations, a reference to an instrument includes a reference to another instrument as applied or adopted by, or incorporated in, the first instrument. (2) In these Regulations, unless the contrary intention appears, a reference to an instrument is a reference to the instrument as amended from time to time. instrument means a code, standard or rule (whether made in or outside Australia) relating to dangerous goods or to transport by road or rail, and includes a provision of an instrument.

13 Inconsistency between Regulations and codes etc. (1) This regulation applies if these Regulations apply, adopt or incorporate all or part of a code, standard or rule.

Regulations 2011 14 (2) If there is any inconsistency between these Regulations and the code, standard or rule, these Regulations prevail to the extent of the inconsistency. (3) Despite subregulation (2), if an applied, adopted or incorporated provision uses a term that is defined both in the relevant code, standard or rule and in these Regulations, in that provision the term has the meaning given in the code, standard or rule, unless the contrary intention appears.

14 References to determinations, exemptions, approvals and licences (1) In these Regulations: (a) a reference to a relevant document includes a reference to the document as varied; and (b) a reference to the variation of a relevant document includes a reference to a variation by addition, omission or substitution. relevant document means any of the following: (a) a determination; (b) an exemption; (c) an approval; (d) a dangerous goods driver licence; (e) a dangerous goods vehicle licence; (f) a corresponding determination; (g) a corresponding exemption; (h) a corresponding approval; (i) a corresponding dangerous goods driver licence; (j) a corresponding dangerous goods vehicle licence.

Regulations 2011 15

15 Dangerous goods (1) For the definition dangerous goods in section 5 of the Act, a substance or article is dangerous goods if: (a) it is determined under regulation 195(a) to be dangerous (b) it satisfies the dangerous goods classification criteria mentioned in Part 2 of the ADG Code. (2) However a substance or article to which subregulation (1)(b) applies is not dangerous goods if: (a) it is determined under regulation 195(a) not to be (b) it is described as not subject to the ADG Code in a special provision in Chapter 3.3 of the ADG Code that applies to it under column 6 of the Dangerous Goods List.

16 Goods too dangerous to be transported For the definition goods too dangerous to be transported in section 5 of the Act, a substance or article is goods too dangerous to be transported if: (a) it is listed in Appendix A to the ADG Code; or (b) it is determined under regulation 195(d) to be goods too dangerous to be transported; or (c) it is so sensitive or unstable that it cannot be safely transported even if the relevant requirements of these Regulations and the ADG Code are complied with. Note for regulation 16

17 UN Class, UN Division and Category For these Regulations, dangerous goods are of the UN Class, UN Division or Category: (a) determined under regulation 195(b)(i) for those goods; or

Regulations 2011 16 (b) if there is no such determination for the goods – ascertained in accordance with the ADG Code. Notes for regulation 17 1 Under the UN classification system there are 9 classes of dangerous goods. Under that system some Classes are further divided into Divisions, and some Divisions are divided into Categories. 2 Under the ADG Code, if particular dangerous goods are listed in the Dangerous Goods List, their UN Class or Division is that listed in column 2 of that list opposite the name and description of those goods, unless Chapter 3.3 of the ADG Code provides for those goods to be assigned to a different Class or Division. If applicable, Chapter 2 of the ADG Code describes how the UN Category of dangerous goods is to be determined. Once again the Category may be changed under Chapter 3.3 of the ADG Code. Example for regulation 17 UN Division 6.2 is the relevant division for dangerous goods that are infectious substances and is divided into: (a) Category A infectious substances (substances transported in a form that, if exposure occurs, can cause permanent disability or life- threatening or fatal disease to humans or animals); and (b) Category B infectious substances (others).

18 Packing Groups For these Regulations, dangerous goods are of the Packing Group (if any): (a) determined under regulation 195(b)(ii) for those goods; or (b) if there is no such determination for the goods – ascertained in accordance with the ADG Code. Notes for regulation 18 1 The assignment of particular dangerous goods to a Packing Group indicates the degree of danger, and the level of containment required for, the goods. The Packing Groups, and the degree of danger they indicate, are the following: (a) Packing Group I (substances presenting high danger); (b) Packing Group II (substances presenting medium danger); (c) Packing Group III (substances presenting low danger). 2 The Packing Group of a substance can be determined from the Dangerous Goods List, although in some cases it is also necessary to refer to Chapter 3.3 of the ADG Code (the List identifies those cases).

Regulations 2011 17

19 Subsidiary hazard For these Regulations, the subsidiary hazard of particular dangerous goods is the subsidiary hazard (if any): (a) determined under regulation 195(b)(iii) for the dangerous (b) if there is no determination under regulation 195(b)(iii) for the dangerous goods – ascertained in accordance with the Note for regulation 19 Dangerous goods that are able to be assigned to more than one UN Class or Division are assigned a subsidiary hazard. This subsidiary hazard is the other UN Class or Division to which the goods also belong. Under the ADG Code, if particular dangerous goods are listed in the Dangerous Goods List, their subsidiary hazard is that listed in column 4 of that list opposite the name and description of those goods, unless Chapter 3.3 of the ADG Code provides for those goods to be assigned a different subsidiary hazard.

20 Incompatibility (1) Goods (whether dangerous goods or not) are incompatible with dangerous goods if: (a) the goods and the dangerous goods are incompatible under Chapter 9.1 of the ADG Code; or (b) the goods are determined under regulation 195(c) to be incompatible with the dangerous goods; or (c) when the goods are mixed, or otherwise brought into contact, with the dangerous goods, the goods are likely to interact with the dangerous goods and increase risk because of the interaction. (2) Packaging or equipment for use in the transport of dangerous goods is incompatible with the dangerous goods if any component of the packaging or equipment that is intended or likely to come into contact with the goods during transport: (a) is likely to interact with the goods and increase risk because of the interaction; and (b) is not protected from contact under foreseeable circumstances by a protective coating or other effective means.

Regulations 2011 18

21 Dangerous situations These Regulations do not apply to the transport of dangerous goods by, or at the direction of, an authorised officer or an officer of an emergency service, to the extent necessary to avert, eliminate or minimise a dangerous situation.

22 Dangerous goods less than 25% of placard load and in small receptacles (1) These Regulations do not apply to the transport by a person of a load containing dangerous goods if: (a) the load does not contain: (i) dangerous goods in any single receptacle with a (ii) more than 500 kg of dangerous goods in any single (b) the load does not include any designated dangerous (c) the aggregate quantity of the dangerous goods in the load is less than 25% of a placard load; and (d) the goods are not being transported by the person in the course of a business of transporting goods by road; and (e) the goods are not being transported by the person in or on a passenger train. designated dangerous goods means dangerous goods: (a) of UN Class 1 (explosives), except: (i) dangerous goods of UN Division 1.4S; and (ii) track signals carried in or on a unit of rolling stock for the safety of persons working in rail transport; or (b) of Category A of UN Division 6.2 (infectious substances); or (c) of UN Class 7 (radioactive material).

Regulations 2011 19

23 Explosives and radioactive material These Regulations do not apply to the transport of dangerous goods of UN Class 1 (explosives) or UN Class 7 (radioactive material) unless those goods are being transported with other

23A Mobile processing unit for explosives (1) These Regulations do not apply to the transport of dangerous goods by a mobile processing unit for the purpose of manufacturing explosives. (2) For subregulation (1), a mobile processing unit is a vehicle, or a moveable piece of equipment (other than a trailer), designed to transport the constituents of a bulk ammonium nitrate-based explosive to a place where the explosive will be manufactured and used.

24 UN Division 6.2 Infectious substances These Regulations do not apply to the transport in or on a vehicle of dangerous goods that are UN Division 6.2 infectious substances in a consignment where the aggregate quantity of dangerous goods is not more than the quantity set out in subclause (3)(a) of the note to section 1.1.1.2 of the ADG Code.

25 Dangerous goods that are part of vehicle or its equipment These Regulations do not apply to the transport in or on a vehicle of dangerous goods: (a) in the vehicle's fuel tank; or (b) in an appliance or plant that forms part of the vehicle and is necessary for its operation; or (c) that are: (i) portable fire fighting equipment or other portable safety equipment; and (ii) part of the safety equipment of the vehicle.

26 Tools of trade and dangerous goods for private use (1) For this regulation, a load that includes dangerous goods is a private use load if: (a) subregulation (2) or (3) applies to the load; and

Regulations 2011 20 (b) the dangerous goods: (i) are not being transported in the course of a business of transporting goods; and (ii) are being transported: (A) by a person who intends to use them; or (B) so that they can be used for a commercial purpose. (2) This subregulation applies to a load if: (a) the aggregate quantity of dangerous goods in the load is less than 500; and (b) the load does not include dangerous goods of any of the (i) UN Division 2.1, other than aerosols; (ii) UN Division 2.3; (iii) Packing Group I. (3) This subregulation applies to a load if: (a) the aggregate quantity of dangerous goods in the load is less than 250; and (b) the load includes dangerous goods of one or more of the (i) UN Division 2.1, other than aerosols; (ii) UN Division 2.3; (iii) Packing Group I; and (c) the aggregate quantity of dangerous goods of UN Division 2.3 or Packing Group I together is less than 100. (4) These Regulations, other than this regulation, do not apply in relation to a private use load. (5) A person commits an offence if: (a) the person transports a private use load; and

Regulations 2011 21 (b) a package of dangerous goods in the load: (i) does not comply with the packaging requirements appropriate to the quantity of dangerous goods, specified in Part 4 of the ADG Code; or (ii) is not appropriately marked (as defined in regulation 66); or (iii) is not loaded, secured, segregated, unloaded and otherwise transported in a way that: (A) ensures the packaging of the dangerous goods remains fit for its purpose; and (B) eliminates risk, or if it is not possible to eliminate risk, that minimises risk to the maximum extent that is practicable. (c) is reckless as to the circumstance mentioned in subregulation (5)(b). (6) A person commits an offence if: (a) the person transports a private use load in or on a vehicle; and (b) the aggregate quantity of dangerous goods of UN Class 3, 4, 5 or 6 in the load is more than 250; and (c) the person transports the load: (i) in the passenger compartment of the vehicle; or

Regulations 2011 22 (ii) in an enclosed space that is not separated from the passenger compartment of the vehicle. (c) is reckless as to the quantity of dangerous goods of the kind mentioned in subregulation (6)(b) in the load; and (d) intentionally transports the load as mentioned in subregulation (6)(c). (7) A person commits an offence if: (a) the person transports a private use load in or on a vehicle; and (b) the aggregate quantity of dangerous goods of UN

Division 2.1, UN Division 2.3 or Packing Group I in the load is more than 50; and (c) the person transports the load: (i) in the passenger compartment of the vehicle; or (ii) in any other enclosed space in the vehicle, unless the space is sufficiently ventilated to prevent an accumulation of vapours or fumes. (c) is reckless as to the quantity of dangerous goods of the kind mentioned in subregulation (7)(b) in the load; and (d) intentionally transports the load as mentioned in subregulation (7)(c).

Regulations 2011 23

Part 2 Transport of dangerous goods to which special provision applies

27 Meaning of special provision (1) In this Part: special provision means a Special Provision set out in

Chapter 3.3 of the ADG Code. (2) A special provision applies to the transport of dangerous goods if column 6 of the Dangerous Goods List specifies that the special provision applies to the transport of the goods.

28 Application of Part This Part applies if: (a) a special provision applies to the transport of dangerous (b) the special provision: (i) prohibits the transport of the goods by road or rail; or (ii) imposes a restriction on the way the goods are to be transported by road or rail.

29 Consignor's duties and and

Regulations 2011 24

30 Packer's duties and and

31 Loader's duties and

Regulations 2011 25 and

32 Prime contractor's and rail operator's duties (c) a special provision applies to the transport of the goods; and (d) the transport of the goods does not comply with the special and

33 Driver's duties and

Regulations 2011 26 (c) the transport of the goods does not comply with the special and

34 Definitions relevant provision of Part 4 of the ADG Code, for dangerous goods, means a provision of Part 4 of the ADG code mentioned in column 8, 9, 10 or 11 of the Dangerous Goods List for those unsuitable, in relation to packaging, see regulation 35.

35 Meaning of unsuitable Packaging is unsuitable for use in the transport of dangerous goods if any of the following apply: (a) the packaging is of a design that: (i) is required by Part 6 of the ADG Code to undergo tests; and (ii) is neither: (A) approved under regulation 59; nor

Regulations 2011 27 (B) foreign approved; (b) the packaging does not meet any relevant standards or requirements mentioned in Part 4 or 6 of the ADG Code (including requirements with respect to inspection, maintenance and repair); (c) the use, or reuse, of the packaging in the transport of the goods does not comply with Part 4 or 6 of the ADG Code; (d) the use of the packaging in the transport of the goods is prohibited by a determination; (e) the packaging is incompatible with the goods; (f) the packaging is damaged or defective to the extent that it is not safe to use in the transport of the goods; (g) for a freight container that is a bulk container – the container does not have affixed to it a Safety Approval Plate as required under the International Convention for Safe Containers 1972.

36 Part does not apply to dangerous goods packed in limited quantities or excepted quantities This Part does not apply to dangerous goods that are: (a) goods packed in limited quantities; or (b) goods packed in excepted quantities.

37 Meaning of general packaging general packaging means all packaging (including large packaging) other than bulk containers, freight containers, MEGCs, overpacks, portable tanks and tanks on tank vehicles.

38 Consignor's duties

Regulations 2011 28 and

39 Packer's duties and

Regulations 2011 29

40 Loader's duties (c) the packaging is damaged or defective to the extent that it and damaged or defective to that extent mentioned in paragraph (c).

41 Prime contractor's and rail operator's duties (c) the goods are packed in general packaging; and

Regulations 2011 30 (d) the packaging is damaged or defective to the extent that it and paragraph (d).

42 Driver's duties (c) the packaging is damaged or defective to the extent that it and paragraph (c).

Regulations 2011 31

43 Meaning of other packaging other packaging means bulk containers, demountable tanks, freight containers, MEGCs, portable tanks and tanks on tank vehicles.

44 Manufacturer's duties – compliance plates for portable tanks, MEGCs and tank vehicles (a) the person manufactures a portable tank or an MEGC for use in the transport of dangerous goods; and (b) the person fails to attach a compliance plate to it in compliance with Chapter 6.7 of the ADG Code. (2) Subregulation (1) does not apply to a person in relation to a portable tank if: (a) Chapter 6.7 of the ADG Code permits the marking of the tank instead of the attachment of a compliance plate; and (b) the tank is marked as required by that Chapter. (a) the person manufactures a tank vehicle for use in the transport of dangerous goods; and (b) fails to attach a compliance plate to it in compliance with Section 6.9.2.2 of the ADG Code. (4) An offence against subregulation (1) or (3) is an offence of strict (5) In this regulation: compliance plate means a plate that complies with the requirements of Part 6 of the ADG Code.

Regulations 2011 32

45 Owner's duties – portable tanks, demountable tanks and MEGCs (a) the person owns a portable tank, demountable tank or MEGC; and (b) the person uses the tank or MEGC, or permits it to be used, in the transport of dangerous goods; and (c) the tank or MEGC is unsuitable for use in the transport of the goods.

46 Consignor's duties (b) the goods are packed in other packaging provided by the (b) the goods are packed in other packaging that was provided by another person; and

Regulations 2011 33 and and

47 Packer's duties (ii) the person packs the goods in a way that does not comply with a relevant provision of Part 4 of the ADG and

Regulations 2011 34 and

48 Loader's duties (c) the packaging is unsuitable for use in the transport of the and and (d) knows, or ought reasonably to know, of the unsuitability.

49 Prime contractor's and rail operator's duties (c) the goods are packed in other packaging provided by the (d) either:

Regulations 2011 35 (c) the goods are packed in other packaging provided by another person; and (d) either: and and

50 Driver's duties

Regulations 2011 36 and and

51 Consignor's duties (b) the goods are packed in an overpack; and (c) the preparation of the overpack and its contents does not

Regulations 2011 37

52 Packer's duties (a) the person packs dangerous goods for transport in an overpack; and (i) the packing of the goods into the overpack does not (A) Section 5.1.2 of the ADG Code; or (B) an approval under regulation 63; or (ii) the preparation of the overpack or its contents does not comply with: (A) Section 5.1.2 of the ADG Code; or (B) an approval under regulation 63. and and

53 Loader's duties (b) the goods are packed in an overpack; and

Regulations 2011 38 (c) the preparation of the overpack or its contents does not and and

54 Prime contactor's and rail operator's duties (c) the goods are packed in an overpack; and (d) the preparation of the overpack or its contents does not and

Regulations 2011 39 and

55 Driver's duties (b) the goods are in an overpack; and (c) the preparation of the overpack or its contents does not and and

56 Incorrect marking of packaging (a) the person applies a marking mentioned in Part 6 of the ADG Code to packaging; and

Regulations 2011 40 (i) the packaging is not of a design approved under regulation 59; or (ii) the marking is not appropriate for the packaging.

57 Sale or supply of non-compliant packaging (a) the person sells, supplies, or offers to sell or supply, packaging for use in the transport of dangerous goods; and (b) the packaging does not comply with subregulation (3) for those goods. (3) Packaging complies with this subregulation for dangerous goods if: (a) the packaging: (i) is of a design that has been approved under regulation 59; and (ii) is marked in compliance with Part 6 (or, if applicable, Chapter 3.4 or 3.5) of the ADG Code; and (iii) is appropriate for those goods; or (b) the packaging: (i) complies with Parts 4 and 6 (or, if applicable, Chapter 3.4 or 3.5) of the ADG Code; and (ii) is appropriate for those goods.

Regulations 2011 41

58 Definitions NATA means the National Association of Testing Authorities. recognised testing facility, see regulation 61.

59 Approval of packaging designs (1) The Competent Authority may, on application, approve a design for packaging for use in the transport of dangerous goods if satisfied packaging of that design: (a) will comply with, or is permitted by, Part 6 of the ADG Code; and (b) satisfies all the applicable testing and inspection requirements mentioned in that Part. (2) An application must include the information required under Part 6 of the ADG Code. (3) In determining whether a design for packaging satisfies a testing requirement the Competent Authority may rely on a test certificate issued by a recognised testing facility under regulation 62. (4) The Competent Authority may approve a design for packaging subject to any condition about the construction, packing, use or maintenance of packaging of that design that the Competent Authority considers necessary for the safe use of the packaging in the transport of dangerous goods.

60 Offences relating to approvals (a) the person constructs packaging for use in the transport of regulation 59 subject to a condition about its construction; and

Regulations 2011 42 (c) the packaging is constructed in contravention of the condition. (a) intentionally constructs the packaging for use in the transport of dangerous goods; and (b) knows, or ought reasonably to know, of the condition; and (c) knows, or ought reasonably to know, of the contravention. regulation 59 subject to a condition about how it is packed; and (c) the packaging is packed in contravention of the condition. (a) intentionally packs the goods in the packaging for and (a) the person uses packaging in the transport of dangerous regulation 59 subject to a condition about its maintenance; and

Regulations 2011 43 (c) the packaging has not been maintained in compliance with the condition. (a) intentionally uses the packaging in the transport of the and (a) the person uses packaging in the transport of dangerous regulation 59 subject to a condition about its use; and (c) the packaging is used in contravention of the condition. (a) intentionally uses the packaging in the transport of the and

Regulations 2011 44

61 Recognised testing facilities For these Regulations, the following are recognised testing facilities in relation to a performance test of a kind mentioned in Part 6 of the ADG Code: (a) a testing facility registered by NATA to conduct tests of that kind; (b) if NATA has not registered a testing facility for conducting tests of that kind – a testing facility in Australia capable of conducting the test; (c) a testing facility in another country approved by a public authority of that country to conduct tests of that kind.

62 Test certificates and observation of testing (1) A recognised testing facility may certify in writing that a design for packaging has passed a performance test of a kind mentioned in Part 6 of the ADG Code. (2) The test certificate must include the details required under Part 6 (3) If the testing facility is registered by NATA, the test certificate and any report on the test must be in the form approved by NATA for such a certificate or report. (4) A test conducted by a testing facility mentioned in regulation 61(b) must be observed by the Competent Authority or a person nominated by the Competent Authority.

63 Approval of overpack preparation method (1) The Competent Authority may, on application, approve a method of preparing an overpack for transport that does not comply with Section 5.1.2 of the ADG Code if the Competent Authority considers that the risk involved in using the method is not greater than the risk involved in using a method that does comply with that Section. (2) The Competent Authority may approve a method of preparing an overpack subject to conditions about the use of the overpack that the Competent Authority considers necessary for the safe use of the overpack in the transport of dangerous goods.

Regulations 2011 45 (a) the person uses an overpack in the transport of dangerous (b) the method used to prepare the overpack is approved under subregulation (1) subject to a condition imposed under subregulation (2); and (c) the person uses the overpack in contravention of the condition. (a) intentionally uses the overpack in the transport of the and

64 Authorisation of person or body to grant approvals (1) The Competent Authority may authorise a person or body to exercise the functions of the Competent Authority under regulations 59 and 63. (2) The Competent Authority may authorise a person or body subject to any conditions it considers appropriate in relation to the granting of approvals by the person or body. (3) The Competent Authority may withdraw an authorisation at any time. (4) The withdrawal of an authorisation does not affect any approval granted by the authorised person or body before the withdrawal took effect.

Regulations 2011 46

65 Exercise of functions by authorised body (1) In exercising functions under regulations 59 and 63 an authorised body must comply with: (a) the provisions of Part 6 of the ADG Code relating to the granting of an approval; and (b) any conditions imposed under regulation 64(2). (2) An authorised body that grants an approval must give to the Competent Authority the information necessary to enable the Competent Authority to maintain the register mentioned in regulation 213. (3) If an authorised body exercises a function mentioned in subregulation (1), the following provisions apply as if a reference in them to the Competent Authority were a reference to the authorised body: (a) regulation 4, definition approval; (b) regulations 59 and 63; (c) Part 18, Divisions 2 and 3, to the extent they relate to approvals. authorised body means a person or body authorised under regulation 64.

66 Meaning of appropriately marked (1) Subject to this regulation, a package of dangerous goods is appropriately marked if it is marked and labelled in compliance with Chapter 5.2 of the ADG Code. (2) A receptacle with a capacity of more than 500 kg or L, other than a cargo transport unit or an overpack, is appropriately marked if it is marked and labelled in compliance with Chapters 5.2 and 5.3.3 of the ADG Code. (3) An overpack is appropriately marked if it is marked and labelled in compliance with Section 5.1.2 of the ADG Code.

Regulations 2011 47 (4) A package of dangerous goods packed in limited quantities is appropriately marked if it is marked and labelled in compliance with Chapter 3.4 or 3.5 of the ADG Code. (5) A package of dangerous goods that is packed in excepted quantities is appropriately marked if it is marked and labelled in compliance with Chapter 3.5 of the ADG Code.

67 Consignor's duties (b) the goods are in a package; and (c) the package is not appropriately marked. (b) the goods are in a package; and (c) a marking or label on the package about its contents (a) the person consigns a package of goods for transport; and (b) the package does not contain dangerous goods; and

Regulations 2011 48 (c) the package is marked or labelled as if it contained (4) An offence against subregulation (1), (2) or (3) is an offence of strict liability. (5) It is a defence to a prosecution for an offence against subregulation (3) if the defendant establishes that the marking or labelling of the package complies with the requirements of the contents of the package.

68 Packer's duties (a) the person packs dangerous goods for transport in a package; and (b) the package is not, or will not be once the package is ready to be transported, appropriately marked. and (c) knows, or ought reasonably to know, the package is not or will not be appropriately marked.

Regulations 2011 49 (a) the person packs dangerous goods for transport in a package; and (b) the person marks or labels the package with a marking or label about its contents; and (c) the marking or label contains misleading information. and (c) intentionally marks or labels the package; and (d) knows, or ought reasonably to know, the information is (a) the person packs goods in a package for transport; and (b) the package does not contain dangerous goods; and (c) the person marks or labels the package as if it contained (a) intentionally packs the goods in the package; and (b) knows, or ought reasonably to know, the package does not contain dangerous goods; and

Regulations 2011 50 (c) intentionally marks or labels the package as if it contained subregulation (3) if the defendant establishes that the marking or labelling of the package complies with the requirements of the contents of the package.

69 Prime contractor's and rail operator's duties (b) the person transports dangerous goods in a package; and (c) the package is not appropriately marked. (b) knows, or ought reasonably to know, the goods are (c) knows, or ought reasonably to know, the package is not appropriately marked. (b) the person transports dangerous goods in a package; and

Regulations 2011 51 (c) a marking or label on the package about its contents and (c) knows, or ought reasonably to know, the information is (b) the person transports a package of goods; and (c) the package does not contain dangerous goods; and (d) the package is marked or labelled as if it contained (a) intentionally transports the package; and (b) knows, or ought reasonably to know, the package does not contain dangerous goods; and (c) is reckless as to whether the package is marked or labelled as if it contained dangerous goods.

Regulations 2011 52 subregulation (3) if the marking or labelling of the package complies with the requirements of the ICAO Technical Instructions or the IMDG Code that relate to the contents of the package.

70 Meaning of placards, placarded and appropriately placarded (1) A person placards a load if the person affixes, stencils, prints or places a label or emergency information panel on anything being used, or to be used, to transport the load. (2) A load is placarded if a label or emergency information panel about the load is affixed to, or stencilled, printed or placed on, anything being used, or to be used, to transport the load. (3) A placard load is appropriately placarded if it is placarded in compliance with Chapter 5.3 of the ADG Code. emergency information panel means an emergency information panel as defined in Section 5.3.1.3 of the ADG label means a label as defined in Section 1.2.1 of the ADG

71 When load must be placarded (1) A load containing dangerous goods must be placarded if the load: (a) contains: receptacle; or (b) contains an aggregate quantity of dangerous goods of 250 or more and those goods include: (i) dangerous goods of UN Division 2.1 that are not aerosols; or (ii) dangerous goods of UN Division 2.3; or

Regulations 2011 53 (iii) dangerous goods of Packing Group I; or (c) contains dangerous goods of Category A of UN

Division 6.2; or (d) contains an aggregate quantity of dangerous goods of UN Division 6.2, other than Category A, of 10 or more; or (e) contains an aggregate quantity of dangerous goods of 1 000 or more. (2) A load containing dangerous goods that are specified goods must be placarded if: (a) the specified goods include an aggregate quantity of 2 000 or more of any one UN number from a single place of consignment; or (b) the total gross mass of the specified goods is 8 tonnes or more. (3) A load containing dangerous goods that is not required to be placarded under subregulation (1) or (2) must be placarded if the load meets the following conditions: (a) the load contains a mixture of specified goods and other dangerous goods; (b) the following combined quantity calculation applies to the load containing dangerous goods: (i) if the load contains dangerous goods referred to in subregulation (1)(b)(i), (ii) or (iii) – the aggregate quantity of those goods, plus 10% of the total gross mass of the specified goods, is 250 or more; (ii) in any other case – the aggregate quantity of dangerous goods that are not specified goods, plus 25% of the total gross mass of the specified goods, is 1 000 or more. specified goods means: (a) dangerous goods that are packed in limited quantities; or

Regulations 2011 54 (b) any of the following: (i) fireworks that are bon bons, party poppers or sparklers; (ii) domestic smoke detectors containing radioactive material; (iii) lighters or lighter refills containing flammable gas; (iv) fire extinguishers containing compressed or liquefied gas, up to a net mass of 23 kg; or (c) a combination of the goods referred to in paragraphs (a) and (b).

72 Consignor's duties (c) is reckless as to whether the load is appropriately placarded. (b) placarding on the load contains misleading information.

Regulations 2011 55 (c) is reckless as to whether the load is placarded; and (d) is reckless as to whether the information is misleading information. (a) the person consigns a load of goods for transport in or on a cargo transport unit; and (b) the load is not a placard load; and (c) the load is placarded as if it were a placard load. (c) is reckless as to whether the load is placarded as a placard load. of the load complies with the requirements of the ICAO Technical Instructions or the IMDG Code that relate to the contents of the load.

73 Loader's duties (a) intentionally loads the placard load for transport; and

Regulations 2011 56 (c) is reckless as to whether the load is appropriately placarded. (b) the person placards the load; and (c) the placard contains misleading information. (a) intentionally loads the placard load for transport; and (c) intentionally placards the load; and (d) knows, or ought reasonably to know, the information is (a) the person loads a load of goods for transport; and (b) the load is not a placard load; and (c) the person placards the load as if it were a placard load. (b) knows, or ought reasonably to know, the load is not a (c) intentionally placards the load as if it were a placard load.

Regulations 2011 57 of the load complies with the requirements of the ICAO Technical Instructions or the IMDG Code that relate to the contents of the load.

74 Prime contractor's and rail operator's duties (c) the load is not appropriately placarded. (c) knows, or ought reasonably to know, the load is not appropriately placarded. (c) placarding on the load contains misleading information. (c) knows, or ought reasonably to know, the placarding

Regulations 2011 58 (b) the person uses a cargo transport unit that is placarded as if it contained a placard load; and (c) the cargo transport unit does not contain a placard load. (a) intentionally uses the cargo transport unit; and (b) knows, or ought reasonably to know, the cargo transport unit does not contain a placard load. of the cargo transport unit complies with the requirements of the contents of the cargo transport unit.

75 Driver's duties (c) knows, or ought reasonably to know, the load is not appropriately placarded.

Regulations 2011 59 (b) placarding on the load contains misleading information. (c) knows, or ought reasonably to know, the placarding (a) the person is the driver of a road vehicle that is placarded as if it were carrying a placard load; and (b) the vehicle is not carrying a placard load. (a) intentionally acts as the driver of the vehicle; and (b) knows, or ought reasonably to know, the vehicle is not carrying a placard load.

76 Owner's duties (a) the person owns a vehicle; and transport dangerous goods; and

Regulations 2011 60 (c) the vehicle or its equipment does not comply with

77 Consignor's duties a vehicle; and (a) intentionally consigns the goods for transport in or on the and

78 Loader's duties (a) the person loads dangerous goods into or onto a vehicle for transport; and (a) intentionally loads the goods into or onto the vehicle for

Regulations 2011 61 and

79 Prime contractor's and rail operator's duties (b) the person transports dangerous goods in or on a vehicle; and (c) the vehicle or its equipment does not comply with

80 Driver's duties and

Regulations 2011 62 Part 6 Transport of certain dangerous goods and goods too dangerous to transport Division 1 Self-reactive substances, organic peroxides and certain other substances 81 Application of Division (1) This Division applies to the following types of dangerous goods: (a) gases of UN Class 2; (b) self-reactive substances of UN Division 4.1; (c) organic peroxides of UN Division 5.2; (d) other substances for which: (i) the proper shipping name contains the word "STABILIZED"; and (ii) the self-accelerating decomposition temperature when presented for transport in packaging is 50 °C or lower; (e) toxic substances of UN Division or subsidiary hazard6.1; (f) infectious substances of UN Division 6.2; (g) dangerous when wet substances of UN Division 4.3. proper shipping name means the proper shipping name as defined in Section 1.2.1 of the ADG Code. self-accelerating decomposition temperature means the self-accelerating decomposition temperature ascertained in accordance with Section 2.4.2.3.4 of the ADG Code.

82 Consignor's duties a cargo transport unit; and

Regulations 2011 63 (c) the goods are not loaded or stowed, or cannot be transported or unloaded, in compliance with Chapter 7.1 of the ADG Code. and

83 Loader's duties (a) the person loads dangerous goods that are in or on a cargo transport unit for transport; and (c) the person loads the goods other than in compliance with

Chapter 7.1 of the ADG Code.

84 Prime contractor's and rail operator's duties (c) the goods are goods to which this Division applies; and

Regulations 2011 64 (d) the transport does not comply with Chapter 7.1 of the ADG and (b) the person transports a package of infectious substances of UN Division 6.2; and (c) the package is damaged or leaks; and (d) the person fails to comply with Section 7.1.7.2.2 of the (a) intentionally transports the package; and (b) is reckless as to whether the package contains infectious substances of UN Division 6.2; and (c) knows of the damage or leak.

Regulations 2011 65 85 Driver's duties (c) the goods are not transported in compliance with Chapter 7.1 of the ADG Code. and 86 Loader's duties (a) the person loads goods into or onto a cargo transport unit for transport; and (b) the goods are goods too dangerous to be transported.

Regulations 2011 66 Note for regulation 86

87 Prime contractor's and rail operator's duties (b) the person transports goods; and (c) the goods are goods too dangerous to be transported. Note for regulation 87

88 Driver's duties (a) the person is the driver of a vehicle transporting goods; and (b) the goods are goods too dangerous to be transported. (a) intentionally acts as the driver of the vehicle; and

Regulations 2011 67 Note for regulation 88

88A Definition nominally empty storage vessel means a tank or hopper described in section 7.2.7.1 of the ADG Code.

88B Consignor's duties (1) A person may consign a load including a nominally empty storage vessel for transport in a cargo transport unit if the storage vessel is loaded or stowed, or can be transported or unloaded, in compliance with Chapter 7.2 of the ADG Code.

88C Loader's duties (1) A person must load a nominally empty storage vessel for transport in a cargo transport unit in accordance with Chapter 7.2 of the ADG Code.

Regulations 2011 68

88D Prime contractor's and rail operator's duties (1) A prime contractor or rail operator must transport a load including a nominally empty storage vessel in compliance with Chapter 7.2 of the ADG Code.

88E Driver's duties (1) The driver of a road vehicle transporting a nominally empty storage vessel must do so in compliance with Chapter 7.2 of the

89 Consignor's duties (b) the dangerous goods in the load or their packaging are not, or will not be, stowed, loaded and restrained in compliance with Part 8.1 of the ADG Code.

Regulations 2011 69 a cargo transport unit; and (b) the cargo transport unit is not, or will not be, restrained in compliance with Chapter 8.2 of the ADG Code. (a) intentionally consigns the goods for transport in or on the cargo transport unit; and and

90 Loader's duties (b) the dangerous goods in the load or their packaging are not stowed, loaded and restrained in compliance with Part 8.1 (a) the person loads dangerous goods that are in or on a cargo transport unit for transport; and

Regulations 2011 70 (b) the cargo transport unit is not restrained in compliance with (a) intentionally loads the goods into or onto the vehicle for and (c) is reckless as to the non-compliance.

91 Prime contractor's and rail operator's duties (c) the dangerous goods in the load or their packaging have not been stowed or loaded, or are not restrained, in compliance with Part 8.1 of the ADG Code. (b) the person transports dangerous goods in or on a cargo transport unit; and

Regulations 2011 71 (c) the cargo transport unit is not restrained in compliance with and

92 Driver's duties (b) the dangerous goods in the load or their packaging have not been stowed or loaded, or are not restrained, in compliance with Part 8.1 of the ADG Code. dangerous goods that are in a cargo transport unit; and

Regulations 2011 72 (b) the cargo transport unit is not restrained in compliance with and

93 Meaning of segregation load segregation load means: (a) a placard load; or (b) a load containing dangerous goods that: (i) contains: (A) dangerous goods of UN Division 2.3 or UN Class 6 or 8; or (B) dangerous goods that have a subsidiary hazard of 6.1 or 8; and (ii) is being, or is to be, transported with food or food packaging.

94 Application of Part (1) This Part applies in relation to the transport of a segregation load. (2) Dangerous goods packed in limited quantities do not need to comply with this Part.

Regulations 2011 73

95 Exception for certain goods for driver's personal use Despite regulations 96 to 100, food and food packaging may be transported in the cabin of a road vehicle that is transporting dangerous goods if the food or packaging is for the driver's personal use.

96 Consignor's duties (a) the person consigns a segregation load for transport in or on a vehicle; and (b) the vehicle will, in the same journey, be transporting (c) the dangerous goods in the segregation load will not be (a) intentionally consigns the load; and and (c) knows, or ought reasonably to know, the vehicle will be

97 Loader's duties (a) the person loads a segregation load for transport in or on a (b) the vehicle will, in the same journey, be transporting

Regulations 2011 74 (c) the dangerous goods in the segregation load will not be (a) intentionally loads the segregation load into or onto the vehicle for transport; and and (c) knows, or ought reasonably to know, the vehicle will be

98 Prime contractor's duties (b) the person transports a segregation load in or on a road (c) the vehicle is, in the same journey, transporting (d) the dangerous goods in the segregation load are not

Regulations 2011 75 and (c) knows, or ought reasonably to know, the vehicle is

99 Rail operator's duties (b) the person transports a segregation load in or on a train; and (c) the train is, in the same journey, transporting incompatible (d) the dangerous goods in the segregation load are not and (c) knows, or ought reasonably to know, the train is

Regulations 2011 76

100 Driver's duties segregation load; and (b) the vehicle is, in the same journey, transporting (c) the dangerous goods in the segregation load are not and (c) knows, or ought reasonably to know, the vehicle is

101 Approval of Type II segregation devices (1) The Competent Authority may, on application, approve a design for a Type II segregation device if satisfied the design complies with Chapter 6.11 of the ADG Code. (2) An application must include any information required under Chapter 6.11 of the ADG Code. Type II segregation device means a device of the kind described in Section 6.11.4 of the ADG Code.

Regulations 2011 77

102 Approval of methods of segregation (1) The Competent Authority may, on application, approve a method of segregation not complying with Part 9 of the ADG Code for transporting dangerous and incompatible goods, if satisfied: (a) it is impracticable to segregate the goods by a segregation device, or method of segregation, complying with that Part; and (b) the risk involved in using the method to transport the goods is not greater than the risk involved in using a device or method complying with that Part to transport the goods. (2) The Competent Authority may approve a method of segregation subject to any condition necessary for the safe transport of (a) the person is granted an approval under this regulation; and (b) the person contravenes a condition of the approval.

103 Meaning of bulk transfer bulk transfer means the transfer by gravity, pump or pressure differential of liquid, solid or gaseous dangerous goods, by the use of a hose assembly, into or out of: (a) a tank vehicle; or (b) a portable tank, demountable tank, bulk container, pressure drum, tube, MEGC or IBC that is in or on a vehicle.

Regulations 2011 78

104 Transferor's duties – hose assembly (a) the person uses a hose assembly for the bulk transfer of (b) the assembly is damaged or defective to the extent that it is not safe to use to transfer the goods. (a) intentionally uses the hose assembly for the bulk transfer of and (c) knows, or ought reasonably to know, the hose assembly is subregulation (1)(b). (a) the person uses a hose assembly for the bulk transfer of (b) the hose assembly: (ii) has not been inspected and tested at the intervals, or in the way, required under that Chapter; or (iii) has not satisfied a test under that Chapter. (a) intentionally uses the hose assembly for the bulk transfer of

Regulations 2011 79 and (c) knows, or ought reasonably to know, of the circumstance mentioned in subregulation (2)(b).

105 Transferor's duties – general (b) the goods are not transferred: and (ii) in a way that eliminates risk, or if it is not possible to eliminate risk, that minimises risk to the maximum extent practicable. and mentioned in subregulation (1)(b). (i) the receiving receptacle or the transfer equipment is incompatible with the dangerous goods; or

Regulations 2011 80 (ii) the receptacle contains incompatible goods. and (c) knows, or ought reasonably to know, of the incompatibility. (b) the dangerous goods leak, spill or accidentally escape; and (i) fails to immediately stop transferring the goods; or (ii) fails to take all practicable steps to avert, eliminate or minimise risk; or (iii) starts transferring the goods again before the conditions causing the leak, spill or escape have been rectified. and (c) is reckless as to the leak, spill or escape; and (d) intentionally engages in the conduct mentioned in subregulation (3)(c).

Regulations 2011 81

106 Occupier's duties (b) a hose assembly on the premises (other than a hose assembly brought onto the premises on a vehicle involved in a transfer) is, or is intended to be, used for the bulk transfer of dangerous goods; and (c) the hose assembly: (a) is reckless as to the transfer of the goods occurring at the premises; and and (c) is reckless as to whether the hose assembly is, or is intended to be used, for the bulk transfer of dangerous (d) is reckless as to the circumstance mentioned in subregulation (1)(c). (b) the goods are not transferred: and

Regulations 2011 82 (ii) in a way that averts, eliminates or minimises risk. (a) is reckless as to the transfer of the goods occurring at the premises; and and mentioned in subregulation (2)(b). (b) the person fails to keep accurate records in compliance with Section 10.1.3.4 of the ADG Code of all maintenance work, and each inspection and test, carried out on a hose assembly mentioned in subregulation (1)(b).

107 Prime contractor's duties (c) the person is responsible for a hose assembly that is, or is intended to be, used for the bulk transfer of the dangerous (d) the hose assembly:

Regulations 2011 83 (c) the goods are not transferred: and (ii) in a way that averts, eliminates or minimises risk. and mentioned in subregulation (3)(c). (c) the person fails to keep accurate records in compliance with Section 10.1.3.4 of the ADG Code of all maintenance work, and each inspection and test, carried out on a hose assembly mentioned in subregulation (1)(c).

Regulations 2011 84

108 Rail operator's duties (c) the person is responsible for a hose assembly that is, or intended to be, used for the bulk transfer of the dangerous (d) the hose assembly:

109 Meaning of ratio goods ratio goods means dangerous goods of UN Class 2 that are not in the form of refrigerated liquid.

110 Transferor's duties goods into a tank vehicle; and (b) the goods are ratio goods; and

Regulations 2011 85 (c) the quantity of the goods in the tank into which the goods are transferred exceeds the maximum permitted filling ratio set out in Section 10.3.2 of the ADG Code. and (c) is reckless as to whether the goods are ratio goods; and (d) is reckless as to whether the filling ratio is exceeded. goods into a tank vehicle; and (b) the goods are not ratio goods; and (c) the ullage in the tank does not comply with Section 10.3.1 and (c) is reckless as to whether the goods are not ratio goods; and (d) is reckless as to the non-compliance.

111 Prime contractor's and rail operator's duties

Regulations 2011 86 (b) the person transports dangerous goods in a tank vehicle; and (c) the goods are ratio goods; and (d) the quantity of goods in the tank exceeds the maximum permitted filling ratio set out in Section 10.3.2 of the ADG (b) the person transports dangerous goods in a tank vehicle; and (c) the goods are not ratio goods; and (d) the ullage in the tank does not comply with Section 10.3.1

112 Driver's duties (a) the person is the driver of a road tank vehicle transporting (b) the goods are ratio goods; and (c) the quantity of goods in the tank exceeds the maximum permitted filling ratio set out in Section 10.3.2 of the ADG and

Subdivision 2 Ullage requirements for vehicles licensed after commencement of Subdivision Regulations 2011 87 (c) is reckless as to whether the goods are ratio goods; and (d) knows, or ought reasonably to know, the filling ratio is exceeded. (a) the person is the driver of a road tank vehicle transporting (b) the goods are not ratio goods; and (c) the ullage in the tank does not comply with Section 10.3.1 and (c) is reckless as to whether the goods are not ratio goods; and Subdivision 2 Ullage requirements for vehicles licensed after commencement of Subdivision

112A Application of Subdivision This Subdivision does not apply in relation to the transport of goods on or in a road vehicle that was licensed under Part 15 before the commencement of this Subdivision.

Subdivision 2 Ullage requirements for vehicles licensed after commencement of Subdivision Regulations 2011 88

112B Transferor's duties (1) Subregulation (2) applies in relation to a person engaged in the bulk transfer of goods that are not dangerous goods to a tank (tank A) that is on, or part of, a vehicle if, before tank A is emptied of the non-dangerous goods: (a) the vehicle is carrying dangerous goods in another tank or in another compartment of tank A; or (b) the vehicle is likely to carry dangerous goods in another tank or in another compartment of tank A. (2) A person to whom this subregulation applies must ensure that the ullage in tank A in respect of the non-dangerous goods, complies with section 10.3.1 of the ADG Code as if the goods were dangerous goods. (a) engages in the bulk transfer of goods; and (b) fails to comply with subregulation (2).

112C Prime contractor's and rail operator's duties (1) A prime contractor or rail operator using a vehicle to transport a tank (tank A) containing goods that are not dangerous goods at the same time as using the vehicle to transport dangerous goods in another tank or another compartment of tank A, must ensure the ullage in tank A in respect of the non-dangerous goods complies with section 10.3.1 of the ADG Code as if the non-dangerous goods were dangerous goods. (b) the person fails to comply with subregulation (1).

Regulations 2011 89

112D Driver's duties (1) Subregulation (2) applies in relation to a road tank vehicle if: (a) the vehicle has a tank (tank A) containing goods that are not dangerous goods; and (b) the vehicle also contains dangerous goods in a compartment in tank A or in another tank on the vehicle. (2) The driver of a road tank vehicle may only drive the road tank vehicle if the ullage in tank A in relation to the non-dangerous goods complies with section 10.3.1 of the ADG Code as if the non-dangerous goods were dangerous goods. (a) drives a road tank vehicle; and (b) fails to comply with subregulation (2).

113 Misleading information in transport documentation (a) the person includes information in transport documentation for dangerous goods; and (b) the information is misleading information. (a) intentionally includes the information in the documentation; and (b) is reckless as to whether the documentation is transport documentation; and

Regulations 2011 90 (c) knows, or ought reasonably to know, the information is Example for regulation 113 A person named as consignor of the dangerous goods in transport documentation if the person is not the consignor of the goods.

114 Consignor's duties – transport by road a road vehicle; and (b) the prime contractor for the goods or driver of the road vehicle does not have documentation for the goods that complies with Chapter 11.1 of the ADG Code. (a) the person consigns dangerous goods for transport by (b) the goods will be divided into, and transported in, separate loads; and (c) separate documentation that complies with Chapter 11.1 of the ADG Code for each load has not been given to the prime contractor for the goods or the driver of each road vehicle that is or will be transporting the load. (a) intentionally consigns the goods for transport by road; and and (c) knows, or ought reasonably to know, the goods will be divided and transported as separate loads.

Regulations 2011 91

115 Consignor's duties – transport by rail a unit of rolling stock; and (b) the rail operator for the goods does not have documentation that complies with Chapter 11.1 of the ADG Code for the goods. (3) For subregulation (1), a rail operator is taken to have documentation if the contents of the documentation have been communicated to the rail operator by means of electronic data processing or electronic data interchange.

116 Prime contractor's duties (1) A prime contractor must ensure that a person does not drive a road vehicle used by the prime contractor to transport dangerous goods if: (a) the person has not been given transport documentation (b) the transport documentation: (i) is not carried in the vehicle in accordance with

Chapter 11.1 of the ADG Code; and (ii) is not able to be readily located in the vehicle. (2) A prime contractor that is required to create or use a document under the Act, these Regulations or the ADG Code in relation to the transport of dangerous goods, must retain the document, or a copy of the document, for 3 months after the transport of the (3) For subregulation (2): (a) the document, or copy of the document, must be retained in hard copy and be readily legible; and

Regulations 2011 92 (b) a paper copy of the document must be readily able to be created on request of an authorised officer. (4) A person commits an offence if the person: (b) fails to comply with a requirement under this regulation.

117 Rail operator's duties (b) the person transports dangerous goods in or on a train; and (c) the driver of the train has not been given documentation (3) For subregulation (1), the driver is taken to have been given documentation if the contents of the documentation have been communicated to the driver by means of electronic data processing or electronic data interchange.

118 Driver's duties (1) The driver of a road vehicle transporting dangerous goods must: (a) carry documentation for the goods that complies with Chapter 11.1 of the ADG Code; and (b) ensure the documentation is: (i) carried in the vehicle in accordance with Chapter 11.1 of the ADG Code; and (ii) readily able to be located in the vehicle.

Regulations 2011 93 (2) The driver of a road vehicle transporting dangerous goods must produce the transport documentation for the goods for inspection by an authorised officer or an officer of an emergency service on request. (a) is the driver of a road vehicle transporting dangerous (b) fails to comply with subregulation (1) or (2).

119 Train driver's duties (b) the person does not have documentation that complies with Chapter 11.1 of the ADG Code for the goods. asks the person to produce for inspection documentation (c) the person fails to produce the documentation. subregulation (1) if the defendant establishes a reasonable excuse.

Regulations 2011 94 (5) This regulation does not apply if: (a) the train is in a depot or yard or is engaged in shunting operations; and (b) the documentation is readily available elsewhere in the immediate vicinity of the depot or yard or of those operations.

120 Meaning of required emergency information required emergency information means information: (a) that complies with Chapter 11.2 of the ADG Code; or (b) approved under regulation 126.

121 Consignor's duties (a) the person consigns a placard load for transport in or on a (b) the required emergency information for the dangerous goods in the load is not in the vehicle. (a) intentionally consigns the load for transport in or on the (c) knows, or ought reasonably to know, the information is not in the vehicle.

122 Prime contractor's duties

Regulations 2011 95 (i) the vehicle is not equipped with an emergency information holder that complies with Chapter 11.2 of the ADG Code; or (ii) the required emergency information for the dangerous goods in the load is not in the holder.

123 Rail operator's duties (b) the person transports a placard load in or on a train; and (c) the required emergency information for the dangerous goods in the load is not in the train driver's cab. (3) This regulation does not apply if: (a) the train is engaged in shunting operations; and (b) the documentation is readily available elsewhere in the immediate vicinity of those operations.

124 Driver's duties

Regulations 2011 96 (i) the vehicle is not equipped with an emergency information holder that complies with Chapter 11.2 of the ADG Code; or (ii) the required emergency information for the dangerous goods in the load provided by the consignor of the goods, or by the prime contractor for the transport of the goods, is not in the holder. (b) the road vehicle's emergency information holder contains anything other than: (i) the required emergency information for the dangerous goods in the load; and (ii) the transport documentation for the dangerous asks the person to produce for inspection the required emergency information for the dangerous goods in the (c) the person fails to produce the information. (4) An offence against subregulation (1), (2) or (3) is an offence of strict liability.

Regulations 2011 97

125 Train driver's duties (a) the person is the driver of a train transporting a placard (b) the required emergency information for the dangerous goods in the load is not in the train driver's cab. (a) the person is the driver of a train transporting a placard asks the person to produce for inspection the required emergency information for the dangerous goods in the (c) the person fails to produce the information. (4) This regulation does not apply if: (a) the train is in a depot or yard or is engaged in shunting operations; and (b) the information is readily available elsewhere in the immediate vicinity of the depot or yard or of those operations.

126 Approval of emergency information The Competent Authority may, on application or on its own initiative, approve information that does not comply with Chapter 11.2 of the ADG Code as required emergency information if satisfied the information is as accurate, and its use would be at least as convenient and efficient, as information that complies with the Chapter.

Regulations 2011 98

126A Consignor's duties (1) A person who consigns dangerous goods that are packed in limited quantities for transport in or on a vehicle must give the prime contractor the information mentioned in section 3.4.12.1 of the ADG Code in relation to the goods. (a) consigns goods for transport in or on a vehicle; and

126B Prime contractor's duties (1) A prime contractor who receives information under regulation 126A must ensure the information is readily ascertainable during the transport of the dangerous goods.

126C Misleading information in documentation (1) A person required to give information in relation to dangerous goods that are packed in limited quantities under section 3.4.12.1 of the ADG Code must ensure the information does not include false or misleading information. (2) A person commits an offence if the person contravenes

Regulations 2011 99

127 Owner's duties (a) the person owns a road vehicle; and transport a placard load; and (c) the vehicle is not equipped with:

128 Prime contractor's duties (c) the vehicle is not equipped with:

Regulations 2011 100 (c) the equipment for the vehicle mentioned in subregulation (1)(c): (i) has not been inspected or tested in compliance with

Part 12 of the ADG Code; or (ii) is not in good repair and proper working order. Fault element: The person knows, or ought reasonably to know, of the circumstance mentioned in subregulation (3)(c).

129 Driver's duties (b) the vehicle is not equipped with: (b) the equipment for the vehicle mentioned in subregulation (1)(b): (i) is not stowed in compliance with Part 12 of the ADG Code; or (ii) has not been inspected or tested in compliance with the that Part; or

Regulations 2011 101 (iii) is not in good repair and proper working order. (c) knows, or ought reasonably to know, of the circumstance mentioned in subregulation (3)(b).

130 Driver's duties (1) This regulation applies in relation to the driver of a road vehicle transporting a placard load if: (a) the vehicle is broken-down or otherwise immobilised or has stopped on a road; and (b) the vehicle is a hazard. (2) The driver must alert other road users to the hazard in compliance with Part 13 of the ADG Code. (3) Despite subregulation (2), the driver may, instead of using warning triangles in accordance with Part 13 of the ADG Code, use warning triangles in accordance with the requirements of rule 227 of the Australian Road Rules. (4) A person commits an offence if the person (a) drives a road vehicle transporting a placard load; and (b) fails to comply with subregulation (2) or (3). Maximum penalty: 10 penalty units

Regulations 2011 102

131 Prime contractor's duties (c) the vehicle is broken-down or otherwise immobilised on a (d) the person fails to ensure the vehicle is, as soon as practicable: (i) repaired so that it can be driven safely off the road; or (ii) towed to a place where it can be repaired. (c) knows, or ought reasonably to know, of the breakdown or immobilisation; and (d) intentionally fails to ensure the vehicle is repaired or towed as soon as practicable. (c) the vehicle is broken-down or otherwise immobilised on a (d) the person fails to: (i) remove the dangerous goods from the road vehicle before the road vehicle is repaired or towed; and

Regulations 2011 103 (ii) transport the dangerous goods from the place of the breakdown or immobilisation. (c) knows, or ought reasonably to know, of the breakdown or immobilisation; and (d) intentionally fails to remove and transport the dangerous (3) Subregulation (2) does not apply if the risk involved in complying with subregulation (2)(d) is greater than the risk involved in not doing so. (4) A prime contractor must ensure that a vehicle containing a placard load that is broken-down or otherwise immobilised on a road is towed by a person who: (a) holds a dangerous goods driver licence that authorises the driver of the tow truck to drive a vehicle with those (b) is accompanied in the cabin of the tow truck by a person who holds a dangerous goods driver licence that authorises the accompanying person to drive a vehicle with those dangerous goods. (5) A person commits an offence if the person: (b) fails to comply with subregulation (4). (6) An offence against subregulation (5) is an offence of strict

Regulations 2011 104

132 Rail operator's duties (b) the person transports a placard load in or on a train; and (c) the train fails or is otherwise immobilised; and (d) the person fails to take, as soon as practicable, appropriate steps to ensure a dangerous situation does not arise. (c) intentionally fails to take the steps mentioned in paragraph (d).

133 Driving (b) the person allows someone else to ride in the vehicle other than in compliance with Part 13 of the ADG Code.

134 Parking

Regulations 2011 105 (b) the person parks the vehicle, or leaves it standing, in a public or private place other than in compliance with

135 Control of ignition sources (1) This regulation applies in relation to a road vehicle transporting a load containing dangerous goods if: (a) the load contains: (b) the load contains dangerous goods that: (i) are of UN Division 2.1 or UN Class 3, 4 or 5; or (ii) have a subsidiary hazard of 2.1, 3, 4 or 5.1. (a) the person is the driver of the road vehicle; and (b) the person: (i) has matches or a cigarette lighter in his or her possession in the vehicle; or (ii) smokes in the vehicle. (a) the person is the driver of the road vehicle; and

Regulations 2011 106 (b) another person: (i) has matches or a cigarette lighter in his or her possession in the vehicle; or (ii) smokes in the vehicle. (a) is reckless as to whether the load contains dangerous goods of the kind mentioned in subregulation (1); and (b) is reckless as to the circumstance mentioned in subregulation (4)(b).

136 Unloading (b) the person permits the dangerous goods to be unloaded from the vehicle other than in compliance with Part 13 of the ADG Code.

137 Detaching trailer (1) Subject to subregulation (2), the driver of a road vehicle that has attached to it a trailer transporting a placard load must detach the trailer in compliance with Part 13 of the ADG Code. (2) Despite subregulation (1), a driver may detach a trailer transporting a placard load from the vehicle other than in compliance with Part 13 of the ADG Code if: (a) the vehicle is in a remote location; and (b) the trailer to be detached contains dangerous goods that are UN Class 3 goods that are flammable liquids; and

Regulations 2011 107 (c) it is necessary to detach the trailer to enable the vehicle to access a location that would be inaccessible if the trailer were attached to the vehicle; and (d) the trailer will not be a traffic hazard or a risk to safety when it is detached. (a) is the driver of a road vehicle; and (b) detaches a trailer in a manner that contravenes subregulation (1) or (2).

138 Road tank vehicle equipped with burner (a) the person is the driver of a road tank vehicle that is transporting a placard load; and (b) the vehicle is equipped with a burner to heat the load; and (c) the person operates the burner, or permits it to be operated, other than in compliance with Part 13 of the ADG

138A Parking (1) A prime contractor must not direct or induce the driver of a road vehicle transporting a placard load to park or otherwise leave the vehicle standing in a public or private place except in compliance with Part 13 of the ADG Code.

Regulations 2011 108

138B Unloading (1) A prime contractor must not direct or induce the driver of a road vehicle transporting a placard load to permit a person to unload dangerous goods from the vehicle except in compliance with

138C Detaching trailer (1) Subject to subregulation (2), a prime contractor must not direct or induce the driver of a road vehicle that has a trailer transporting a placard load attached to it to detach the trailer or permit it to be detached from the vehicle unless it is detached in compliance with Part 13 of the ADG Code. (2) Despite subregulation (1), a prime contractor may direct or induce a driver to detach a trailer from the road vehicle other than in compliance with Part 13 of the ADG Code if: (a) the vehicle is in a remote location; and (b) the trailer to be detached contains dangerous goods that are UN Class 3 goods that are flammable goods; and (c) it is necessary to detach the trailer to enable the vehicle to access a location that would be inaccessible if the trailer were attached to the vehicle; and (d) the trailer will not be a traffic hazard or a risk to safety when it is detached.

Regulations 2011 109 (b) detaches a trailer in a manner that contravenes subregulation (1) or (2).

138D Road tank vehicle equipped with burner (1) A prime contractor who transports a placard load in or on a road vehicle that is equipped with a burner to heat a load must not permit a person to operate the burner except in compliance with

139 Road vehicle – driver's duties (b) the vehicle is involved in an incident resulting in a dangerous situation; and (i) fails to notify the prime contractor for the goods, the Competent Authority, and the police or fire service, of the incident as soon as practicable; or

Regulations 2011 110 (a) is reckless as to whether the vehicle is transporting (b) is reckless as to whether the vehicle is involved in an (c) intentionally fails to notify persons or provide assistance as mentioned in paragraph (c)(i) or (ii).

140 Train – driver's and rail operator's duties (b) the train is involved in an incident resulting in a dangerous situation; and (i) fails to notify the rail operator for the goods of the incident as soon as practicable; or (a) is reckless as to whether the train is transporting (b) is reckless as to whether the train is involved in an incident resulting in a dangerous situation; and

Regulations 2011 111 (c) intentionally fails to notify persons or provide assistance as mentioned in subregulation (1)(c)(i) or (ii). (a) the person is the rail operator for a train transporting (b) the train is involved in an incident resulting in a dangerous situation; and (i) fails to notify the Competent Authority, and the police or fire service, of the incident as soon as practicable; or Fault element: The person knows the train is involved in the incident resulting in the dangerous situation.

141 Prime contractor's and rail operator's duties – food or food packaging (a) dangerous goods are being transported in or on a vehicle; and (b) the vehicle is involved in an incident resulting in: (i) the leakage, spillage or accidental escape of the (ii) a fire or explosion; and (c) there is food or food packaging in the vicinity of the incident (the site) that is within the control of the prime contractor or rail operator for the goods. (a) the vehicle is a road vehicle; and

Regulations 2011 112 (b) the person is the prime contractor for the goods; and (c) the Competent Authority has not given permission to the person to transport the food or food packaging from the site; and (d) the food or food packaging is transported from the site. (a) the vehicle is rolling stock; and (b) the person is the rail operator for the goods; and (i) fails to notify the Competent Authority of the incident as soon as is practicable; or (ii) fails to deal with the food or food packaging as directed by the Competent Authority. (4) An offence against subregulation (2) or (3) is an offence of strict (5) A permission mentioned in subregulation (2)(c) or a direction mentioned in subregulation (3)(c)(ii): (a) must be in writing; and (b) must state the name of the person to whom it is given; and (c) must identify the relevant incident; and (d) must identify the food or food packaging to which it relates; and (e) must take into consideration any requirements of the appropriate food and health authorities; and (f) may contain any other information the Competent Authority considers necessary.

Regulations 2011 113

142 Prime contractor or rail operator to inform Competent Authority (a) a vehicle transporting dangerous goods is involved in an (b) the person is the prime contractor or rail operator for the (c) the person fails to comply with subregulation (3) or (4). (3) As soon as practicable after becoming aware of the incident, the person must give to the Competent Authority information about the incident stating the following: (a) where the incident occurred; (b) the time and date of the incident; (c) the nature of the incident; (d) the dangerous goods being transported when the incident occurred; (e) any other details the Competent Authority may require. (4) Within 21 days after the day when the incident occurred, the person must give to the Competent Authority a written report about the incident stating the following: (a) where the incident occurred; (b) the time and date of the incident; (c) the nature of the incident; (d) what the driver of the vehicle believes to be the likely cause of the incident; (e) what the person believes to be the likely cause of the incident; (f) the dangerous goods being transported when the incident occurred;

Regulations 2011 114 (g) the measures taken to control any leak, spill or accidental escape of dangerous goods and any fire or explosion, arising out of the incident; (h) the measures taken after the incident in relation to the dangerous goods involved in the incident.

143 Telephone advisory service (b) the person transports a relevant load; and (c) a telephone advisory service is not available during the journey. (a) the person consigns a relevant load for transport; and (b) a telephone advisory service is not available during the journey. relevant load means a load that contains: receptacle. telephone advisory service, for the transport of dangerous goods, means a service: (a) provided by the prime contractor or rail operator for, or consignor of, the goods, or someone else for the prime contractor, rail operator or consignor; and

Regulations 2011 115 (b) providing access by a continuously monitored telephone, not located on the vehicle or train carrying the goods, to a person competent to give advice about: (i) the construction and properties of the receptacles in which the dangerous goods are being transported; and (ii) the use of equipment on the vehicle or train on which the dangerous goods are being transported; and (iii) the properties of the dangerous goods; and (iv) methods of safely handling the dangerous goods; and (v) methods of safely containing and controlling the dangerous goods in a dangerous situation.

144 Emergency plans (1) A prime contractor or rail operator may only transport a placard load if the prime contractor or rail operator has an emergency plan for the transport of the goods. (2) A prime contractor or rail operator transporting a placard load must, on becoming aware of a dangerous situation involving the placard load, do everything that the emergency plan for the transport of the load requires the prime contractor or rail operator to do that is reasonably practicable in the circumstances. (3) A person may only consign a placard load for transport if the person has an emergency plan for the transport of the goods. (4) A consignor of a placard load being transported must, on becoming aware of a dangerous situation involving the placard load, do everything that the emergency plan for the transport of the load requires the consignor to do that is reasonably practicable in the circumstances. (5) A person commits an offence if the person: (a) is a prime contractor, rail operator or consignor; and (b) fails to comply with a requirement under this regulation.

Regulations 2011 116 (6) An offence against subregulation (5) is an offence of strict (7) In this regulation: emergency plan, for the transport of a placard load, means a written plan for dealing with any dangerous situation arising from the transport of the goods that is prepared having regard to any guidelines approved by the Ministerial Council.

145 Consignor's duties – information and resources (a) a vehicle transporting a placard load is involved in an (b) the person is the consignor of the load; and (c) an authorised officer or an officer of an emergency service asks the person to do either or both of the following: (i) to give to the officer the information that the officer requires about: (A) the properties of the dangerous goods being transported; and (B) safe methods of handling the goods; and (C) safe methods of containing and controlling the goods in a dangerous situation; (ii) to provide the equipment and other resources necessary: (A) to control the dangerous situation; and (B) to contain, control, recover and dispose of dangerous goods that have leaked, spilled or accidentally escaped; and (d) the person fails to do so as soon as practicable.

Regulations 2011 117 subregulation (1) if the defendant proves that: (a) the prime contractor or rail operator for the goods was asked under regulation 146 to give the same information or provide the same resources for the incident; and (b) the prime contractor or rail operator gave the information or provided the resources.

146 Prime contractor's and rail operator's duties – information and resources (a) a vehicle transporting a placard load is involved in an (b) the person is the prime contractor or rail operator for the (c) an authorised officer or an officer of an emergency service asks the person to do either or both of the following: (i) give to the officer the information that the officer requires about the vehicle's construction, properties and equipment; (ii) provide the equipment and other resources necessary: (A) to control the dangerous situation; and (B) to recover a vehicle involved in the situation or its equipment; and (d) the person fails to do so as soon as practicable. subregulation (1) if the defendant proves that: (a) the consignor was asked under regulation 145 to give the same information or provide the same resources for the incident; and

Regulations 2011 118 (b) the consignor gave the information or provided the resources.

147 Meaning of adequate insurance adequate insurance, for the transport of dangerous goods in or on a road vehicle, means a policy of insurance or other form of indemnity, for a sum that is not less than $5 000 000, in relation to: (a) personal injury, death, property damage and other damage (except consequential economic loss) arising out of any fire, explosion, leakage or spillage of dangerous goods in, on or from the vehicle or any packaging transported in or on the vehicle; and (b) costs incurred by or on behalf of a Commonwealth, State or Territory government authority in a clean-up resulting from such a fire, explosion, leakage or spillage.

148 Owner's duties (a) the person owns a road vehicle; and transport a placard load; and (c) the use of the vehicle to transport the load is not: (i) covered by adequate insurance; or (ii) approved under regulation 151. (3) For subregulation (1), each load bearing vehicle, whether or not it is a motor vehicle, is a single vehicle. (4) For subregulation (1) and despite subregulation (3), a road vehicle comprised of a combination of vehicles is covered by adequate insurance if it is insured as a single road vehicle.

Regulations 2011 119

149 Prime contractor's duties (c) the use of the vehicle to transport the load is not: (i) covered by adequate insurance; or (ii) approved under regulation 151. (3) For subregulation (1), each load bearing vehicle, whether or not it is a motor vehicle, is a single vehicle. (4) For subregulation (1) and despite subregulation (3), a road vehicle comprised of a combination of vehicles is covered by adequate insurance if it is insured as a single road vehicle.

150 Requiring evidence of insurance or approval (a) the person is: (i) the owner of a road vehicle used to transport a placard load; or (ii) the prime contractor for a placard load; and (b) the Competent Authority, by written notice, requires the person to produce: (i) written evidence of adequate insurance as mentioned in regulation 148(1)(c)(i) or 149(1)(c)(i); or (ii) an approval as mentioned in regulation 148(1)(c)(ii) or 149(1)(c)(ii); and

Regulations 2011 120 (c) the person fails to produce the evidence or approval to the Competent Authority within 14 days after the day when the notice is given to the person.

151 Approval to use vehicle without insurance (1) The Competent Authority may, on application, approve the use of a vehicle to transport a placard load without adequate insurance if satisfied that the vehicle owner or prime contractor for the placard load is capable of adequately self-insuring for the sum, and in relation to the matters, mentioned in the definition adequate insurance in regulation 147. (2) An application may be made by the vehicle owner or prime contractor. (3) The Competent Authority may approve the use of a vehicle without adequate insurance: (a) for a single use or for a period not longer than 5 years; and (b) subject to any conditions the Competent Authority thinks fit.

Part 15 Dangerous goods driver licences and dangerous goods vehicle licences

152 Application of Part Despite anything to the contrary in this Part, this Part does not apply to the transport by road of dangerous goods in or on a vehicle if: (a) the goods are transported in an IBC; and (b) the IBC is not packed or unpacked on the vehicle; and (c) the total capacity of IBCs containing dangerous goods in or on the vehicle is not more than 3 000 L.

Division 2 Road vehicles and drivers to be licensed under this Part Regulations 2011 121

153 Part additional to other laws This Part is in addition to any other law in force in the Territory about any of the following: (a) the licensing of drivers; (b) the employment or engaging of drivers; (c) the registration of vehicles; (d) the transport of goods by road.

154 Licensing Authority The Competent Authority may authorise a person or body to exercise the functions of a licensing authority under this Part. Division 2 Road vehicles and drivers to be licensed under this Part

155 Road vehicles to be licensed (1) A road vehicle must not be used to transport: receptacle; unless the vehicle is licensed under this Part to transport the (2) If the Competent Authority makes an administrative determination that a vehicle that is not licensed under this Part may be used to transport the dangerous goods described in subregulation (1), the vehicle may be used to transport the goods without complying with that subregulation.

156 Drivers to be licensed A person must not drive a road vehicle transporting: receptacle;

Regulations 2011 122 unless the person holds a dangerous goods driver licence that authorises the person to drive the vehicle transporting those

157 Application for dangerous goods driver licence (1) A person resident in the Territory who is not the holder of a dangerous goods driver licence or a corresponding dangerous goods driver licence may apply to the licensing authority for a dangerous goods driver licence if the person holds a driver (2) The application must be accompanied by the following: (a) the driver licence evidence required by regulation 158; (b) the competency evidence required by regulation 159; (c) the medical fitness evidence required by regulation 161; (d) 2 photographs, of a size suitable for a passport, of the applicant taken not more than 6 months before the day when the application is made; (e) the prescribed fee.

158 Driver licence evidence (1) The following documents are required as driver licence evidence for an application for the grant or renewal of a dangerous goods driver licence: (a) a current certified extract of entries about the applicant in the driving licences register kept by the driver licensing authority in each jurisdiction where the applicant has held a licence to drive; and (i) the document mentioned in subregulation (2); or (ii) the authorisation mentioned in subregulation (3). (2) For subregulation (1)(b)(i), the document is a copy, certified by the appropriate authority of the jurisdiction where the applicant was convicted, of the records of any conviction of the applicant for an offence involving the driving of a road vehicle.

Regulations 2011 123 (3) For subregulation (1)(b)(ii), the authorisation is authorisation by the applicant for the licensing authority to have access to: (a) entries about the applicant in the driving licences register of any jurisdiction; and (b) records of any conviction of the applicant for an offence involving the driving of a road vehicle in any jurisdiction. (4) For subregulation (1)(a), a current certified extract is an extract certified by the driver licensing authority not more than 6 months before the day when the application is made.

159 Competency evidence (1) A document mentioned in subregulation (2) is required as competency evidence for an application for the grant or renewal of a dangerous goods driver licence. (2) The document must be either: (a) a certificate issued, not more than 6 months before the day when the application is made, by a person who conducted an approved test or approved training course stating that the applicant passed the test or completed the course; or (b) other written evidence that the applicant passed an approved test or completed an approved training course not more than 6 months before the day when the application is made. approved test means a test approved under regulation 160(1)(a). approved training course means a training course approved under regulation 160(1)(b).

160 Approval of tests and training courses for drivers (1) The Competent Authority may, on application, approve: (a) a test of competence for drivers of road vehicles transporting dangerous goods; or (b) a training course for drivers of road vehicles transporting

Regulations 2011 124 (2) The Competent Authority may approve a test of competence or a training course only if satisfied that a person who passes the test, or completes the course, will have the skills and knowledge to perform the task to which the test or course relates safely and in accordance with these Regulations.

161 Medical fitness evidence (1) The certificate mentioned in subregulation (2) is required as medical fitness evidence for an application for the grant or renewal of a dangerous goods driver licence. (2) The certificate must be: (a) about the medical fitness of the applicant to drive a road (b) issued by a medical practitioner who, not more than 6 months before the day when the application is made, examined and passed the applicant in accordance with the standards in Assessing fitness to drive for commercial and private vehicle drivers – Medical standards for licensing and clinical management guidelines published by Austroads and the National Transport Commission, as in force at the time of the examination.

162 Grant of dangerous goods driver licence (1) The licensing authority must grant a dangerous goods driver licence if an application is made in accordance with regulation 157. (2) However, the licensing authority must not grant the licence if: (a) in the 5 years before the day when the application is made: (i) the applicant has been found guilty by a court in Australia of an offence that makes the applicant (ii) the applicant's driver licence has been cancelled or suspended on a ground that makes the applicant (b) the applicant is subject to a court order prohibiting the applicant from involvement in the transport of dangerous goods by road.

Regulations 2011 125 (3) If the licensing authority refuses to grant a dangerous goods driver licence, the licensing authority must give the applicant

163 Application for renewal of dangerous goods driver licence (1) A person who holds a dangerous goods driver licence may apply to the licensing authority for the renewal of the licence. (2) The application must be accompanied by the following: (a) the driver licence evidence required by regulation 158; (b) the competency evidence required by regulation 159; (c) the medical fitness evidence required by regulation 161; (d) 2 photographs, of a size suitable for a passport, of the applicant taken not more than 6 months before the day when the application is made; (e) the prescribed fee.

164 Renewal of dangerous goods driver licence (1) The licensing authority must renew a dangerous goods driver licence if an application is made in accordance with regulation 163. (2) However, the licensing authority must not renew the licence if: (a) while the licence had effect: (i) the applicant was found guilty by a court in Australia of an offence that makes the applicant unsuitable to be the driver of a vehicle transporting dangerous (ii) the applicant's driver licence has been cancelled or suspended on a ground that makes the applicant (b) the applicant is subject to a court order prohibiting the applicant from involvement in the transport of dangerous goods by road. (3) If the licensing authority refuses to renew a dangerous goods driver licence, the licensing authority must give the applicant

Regulations 2011 126

165 Duration of dangerous goods driver licence (1) A dangerous goods driver licence is granted for the period specified in the licence, being a period not longer than 5 years. (2) A dangerous goods driver licence takes effect on the day when the licence is granted or a later day specified in the licence. (3) A dangerous goods driver licence is renewed for the period specified in the renewed licence, being a period not longer than 5 years.

166 Conditions on dangerous goods driver licence (1) The licensing authority may grant or renew a dangerous goods driver licence subject to conditions mentioned in subregulations (3) and (4). (2) A condition to which the licence is subject must be stated in the (3) The licence may be subject to conditions about one or more of (a) the dangerous goods that may or may not be transported in or on a road vehicle driven by the licensee; (b) the packaging that may or may not be used to transport dangerous goods in or on a road vehicle driven by the licensee; (c) the road vehicles that may be driven by the licensee in transporting dangerous goods; (d) the areas where the licensee may or may not drive a road vehicle transporting dangerous goods or particular dangerous goods; (e) the supervision of the licensee when driving a road vehicle transporting dangerous goods. (4) The licence may be subject to any other condition necessary for the safe transport of dangerous goods by road.

Regulations 2011 127

167 Condition as to evidence of fitness (1) It is a condition of a dangerous goods driver licence that the licensing authority may, by written notice given to the licensee, require the licensee to produce to the authority a certificate: (a) about the medical fitness of the licensee to drive a road (b) issued by a medical practitioner who, not more than 6 months before the day when the certificate is given to the authority, examined and passed the licensee in accordance with the standards in Assessing fitness to drive for commercial and private vehicle drivers – Medical standards for licensing and clinical management guidelines published by Austroads and the National Transport Commission, as in force at the time of the examination. (2) The written notice must specify a period of at least 2 months after the day when the notice is received by the licensee within which the licensee must produce the certificate. (3) The licensing authority must not give written notice under this regulation if the period of validity of the dangerous goods driver licence is less than 4 months.

168 Grounds for cancelling, suspending or varying dangerous goods driver licence (1) A dangerous goods driver licence may be cancelled, suspended or varied if the application for the licence or an application for its renewal: (2) A dangerous goods driver licence may be cancelled or varied if the licensee is unsuitable to continue to be the driver of a road vehicle transporting dangerous goods because: (a) the licensee has contravened the Act, these Regulations or a corresponding law; or (b) the licensee has been found guilty by a court in Australia of an offence; or (c) the licensee's driver licence is cancelled; or

Regulations 2011 128 (d) the licensee is suffering from a medical condition, or has a physical or mental disability.

169 Dangerous goods driver licence to be carried (a) the person holds a dangerous goods driver licence; and (b) the person is the driver of a road vehicle transporting: (c) the person is not carrying his or her dangerous goods driver licence.

170 Definitions approved tank means: (a) a tank of a design approved under regulation 59; or (b) a tank that is foreign approved. business transfer, for a vehicle, means a transfer of the title to the vehicle as part of a transfer of ownership of the business in which the vehicle is used and is to continue to be used. licensed vehicle means a vehicle for which a dangerous goods vehicle licence is in force. prime mover means a road vehicle that is designed to tow a trailer but does not include a vehicle that has a load carrying capacity in addition to a trailer.

Regulations 2011 129 vehicle does not include: (a) a prime mover; or (b) a converter dolly, as defined in the Australian Vehicles Standards Rules set out in Schedule 6 to the Motor Vehicles (Standards) Regulations 2003.

171 Application for dangerous goods vehicle licence (1) A person may apply to the licensing authority for a dangerous goods vehicle licence for a road vehicle: (a) used, or intended to be used, to transport dangerous (b) for which there is not a dangerous goods vehicle licence in force. (2) The application must include the following information: (a) the registration number, make and type of the road vehicle; (b) the type of dangerous goods intended to be transported in or on the road vehicle; (c) if the applicant holds a dangerous goods vehicle licence for another vehicle – the number of that licence. (3) The application must be accompanied by the prescribed fee. (4) A single application may be made for licences for 2 or more road vehicles.

172 Additional information and inspections (1) The licensing authority may, by written notice, require an applicant for the grant or renewal of a dangerous goods vehicle licence for a vehicle: (a) to give to the authority, or a person nominated by the authority, any additional information necessary for a proper consideration of the application; and (b) to make the vehicle available for inspection by the authority, or a person nominated by the authority, at a specified place and time.

Regulations 2011 130 (2) A person who inspects a vehicle for the licensing authority must give a report of the inspection to the authority as soon as practicable after the inspection. (3) The licensing authority must give a copy of any report of an inspection to the applicant if the applicant asks for it.

173 Grant of dangerous goods vehicle licence (1) The licensing authority must grant a dangerous goods vehicle licence for a road vehicle if: (a) an application is made in accordance with regulation 171; and (b) the applicant has complied with any requirement made under regulation 172; and (c) the road vehicle is suitable to transport each type of dangerous goods intended to be transported in or on the road vehicle. (2) Without limiting subregulation (1)(c), if a road vehicle is intended for use in the transport of dangerous goods in the form of a liquid or gas using a tank that will form part of the vehicle or be attached to it, the vehicle is suitable only if: (a) the tank is an approved tank; and (b) the vehicle complies with the requirements of Chapters 4.4 and 6.9 of the ADG Code applying to road vehicles for use in transporting dangerous goods in the form of a liquid or gas. (3) However, the licensing authority must not grant the licence if the applicant is subject to a court order prohibiting the applicant from involvement in the transport of dangerous goods by road. (4) The licensing authority may grant a single dangerous goods vehicle licence for 2 or more road vehicles. (5) If the licensing authority refuses to grant a dangerous goods vehicle licence, the licensing authority must give the applicant

174 Application for renewal of dangerous goods vehicle licence (1) A person who holds a dangerous goods vehicle licence for a road vehicle may apply to the licensing authority for the renewal of the licence.

Regulations 2011 131 (2) The application must: (a) include the information required under regulation 171(2) for an application for the grant of a dangerous goods vehicle licence for the road vehicle; and (b) be accompanied by the prescribed fee.

175 Renewal of dangerous goods vehicle licence (1) The licensing authority must renew a dangerous goods vehicle licence for a road vehicle if: (a) an application is made in accordance with regulation 174; and (b) the applicant has complied with any requirement made under regulation 172; and (c) the road vehicle is suitable to transport each type of dangerous goods intended to be transported in or on the road vehicle. (2) Without limiting subregulation (1)(c), if a road vehicle is intended for use in the transport of dangerous goods in the form of a liquid or gas using a tank that will form part of the vehicle or be attached to it, the vehicle is suitable only if: (a) the tank is an approved tank; and (b) the vehicle complies with the requirements of Chapters 4.4 and 6.9 of the ADG Code applying to road vehicles for use in transporting dangerous goods in the form of a liquid or gas. (3) However, the licensing authority must not renew the licence if the applicant is subject to a court order prohibiting the applicant from involvement in the transport of dangerous goods by road. (4) The licensing authority may do either or both of the following: (a) renew the licence for some but not all of the vehicles to which it relates; (b) add other vehicles to the renewed licence. (5) If the licensing authority refuses to renew a dangerous goods vehicle licence, the licensing authority must give the applicant

Regulations 2011 132

176 Duration of dangerous goods vehicle licence (1) A dangerous goods vehicle licence is granted for the period specified in the licence, being a period not longer than 5 years. (2) A dangerous goods vehicle licence takes effect on the day when the licence is granted or a later day specified in the licence. (3) A dangerous goods vehicle licence is renewed for the period specified in the renewed licence, being a period not longer than 5 years.

177 Conditions on dangerous goods vehicle licence (1) The licensing authority may grant or renew a dangerous goods vehicle licence subject to conditions mentioned in subregulations (3) and (4). (2) A condition to which the licence is subject must be stated in the (3) The licence may be subject to conditions about one or more of (a) the dangerous goods that may or may not be transported in or on the vehicle; (b) the areas where the vehicle may or may not be used to transport dangerous goods or particular dangerous goods; (c) the inspections of the vehicle (if any) that are required. (4) The licence may be subject to any other condition necessary for the safe transport of dangerous goods by road.

178 Grounds for cancelling, suspending or varying dangerous goods vehicle licence (1) A dangerous goods vehicle licence may be cancelled, suspended or varied if the application for the licence or an application for its renewal: (2) A dangerous goods vehicle licence for a road vehicle may be cancelled, suspended or varied if the road vehicle does not comply with the Act or these Regulations.

Regulations 2011 133

179 Disposal of licensed vehicle (1) Before transferring possession or otherwise disposing of a licensed vehicle (otherwise than by way of a business transfer), the licensee must: (a) attach the licence to the notice of the disposal required under subregulation (2); or (b) destroy the licence and, if required by the licensing authority, provide sufficient evidence to show that this has been done. (2) Within the 21 days after transferring possession or otherwise disposing of the vehicle (otherwise than by way of a business transfer), the licensee must give notice of the transfer or disposal (a notice of disposal) to the licensing authority. (3) If the dangerous goods vehicle licence for the vehicle also relates to another vehicle, the licensee must attach the licence to the notice of the disposal. (4) If the dangerous goods vehicle licence for the vehicle does not relate to another vehicle, the licensee must: (a) attach the licence to the notice of the disposal; or (b) destroy the licence and, if required by the licensing authority, provide sufficient evidence to show that this has been done. (5) On receiving notice of the disposal of a vehicle, the licensing authority must: (a) if the licence also relates to another vehicle: (i) amend the licence by omitting reference to the vehicle being disposed of; and (ii) return the licence to the licensee; or (b) otherwise – cancel the licence.

Regulations 2011 134 (6) An offence against subregulations (1) to (4) is an offence of strict

180 Transfer of licensed vehicle by business transfer (1) Within the 21 days after the transfer of a licensed vehicle by way of a business transfer, the person to whom the vehicle has been transferred (the transferee) must apply to the licensing authority for the transfer of the dangerous goods vehicle licence for the vehicle to the transferee. (3) An application under subregulation (1) must be accompanied by the licence and the prescribed fee. (4) On receipt of the application under subregulation (1), the licensing authority must: (a) if the dangerous goods vehicle licence relates only to the vehicle or vehicles that have been transferred to the transferee: (i) amend the licence by making the transferee the licence holder; and (ii) return the licence to the transferee; or (b) if the dangerous goods vehicle licence also relates to other vehicles: (i) amend the licence by omitting reference to the transferred vehicle or vehicles and return it to the licensee; and (ii) grant to the transferee a dangerous goods vehicle licence for the transferred vehicle or vehicles. (5) Subregulation (4) does not apply if the transferee is ineligible to hold a dangerous goods vehicle licence.

Regulations 2011 135

181 Replacement licence (1) The licensing authority may issue a replacement licence to a licensee if: (a) the licence is renewed; or (b) the licence is varied; or (c) a period of suspension of the licence ends or a suspension is withdrawn. (2) The licensing authority must issue a replacement licence to a licensee if satisfied that the licence has been defaced, destroyed, lost or stolen.

182 Failure to comply with licence conditions (b) the person fails to comply with a condition of the licence.

183 Surrender of licence (1) A licensee may surrender his or her licence by giving notice of surrender to the licensing authority and returning the licence to the authority. (2) A licence ceases to have effect on its surrender.

184 Registers of licences (1) The licensing authority must keep a register of dangerous goods driver licences. (2) The licensing authority must keep a register of dangerous goods vehicle licences. (3) A register may have separate divisions for different kinds of licences.

Regulations 2011 136 (4) The licensing authority must record the grant of each licence in the appropriate register. (5) The licensing authority must note in the register the renewal, cancellation, surrender, suspension or variation of a licence.

185 Records of licences The record of a licence in a register must include the following information: (a) the name of the licensee; (b) the date when the licence was granted and the date of each renewal; (i) the period for which the licence was granted or renewed; or (ii) the expiry date of the licence; (d) for a dangerous goods driver licence – the licensee's date of birth; (e) for a dangerous goods vehicle licence – the registration number, make and type of each road vehicle to which the licence relates; (f) the classes of dangerous goods for which the licence is valid; (g) any conditions to which the licence is subject.

186 Change of information given in licence application (b) the person becomes aware that information given by the person to the licensing authority in, or in relation to, an application for the grant or renewal of the licence is or has become incorrect in a material respect; and (c) the person fails, within 14 days after becoming aware of the matter, to: (i) inform the licensing authority about the matter; and

Regulations 2011 137 (ii) give the correct information to the licensing authority.

187 Production of licences to licensing authority (b) the licensing authority, by written notice, requires the person to produce his or her licence to the licensing authority; and (c) the person fails to produce the licence within 14 days after the day when the notice is given to the person.

188 Return of licence (1) This regulation applies if a licence is produced to the licensing authority or given to the authority by an authorised officer. (2) If the licence has not been cancelled or varied, and is not suspended, the licensing authority must return the licence to the licensee after inspecting it. (3) If the licence has been suspended, the suspension has ended and a replacement licence is not issued, the licensing authority must return the licence to the licensee. (4) If the licence has been varied, the variation is recorded on the licence and a replacement licence is not issued, the licensing authority must return the licence to the licensee. (5) However, if the licence has expired, the licensing authority is not required to return the licence to the licensee.

Regulations 2011 138

189 Cancellation, suspension and variation in dangerous situations The licensing authority must cancel, suspend or vary a licence if the licensing authority reasonably believes that: (a) a ground exists to cancel, suspend or vary the licence; and (b) it is necessary to do so to avoid, eliminate or minimise a dangerous situation.

190 Cancellation and suspension giving effect to court orders The licensing authority must cancel or suspend a licence if the licensee is prohibited by a court order from involvement in the transport of dangerous goods by road.

191 Variation of licence on application (1) The licensing authority may vary a licence on the application of the licensee. (2) An application under subregulation (1) must be accompanied by the licence.

192 Cancellation, suspension and variation in other circumstances (a) the licensing authority considers that a ground exists to cancel, suspend or vary a licence (the proposed action); and (b) regulations 189, 190 and 191 do not apply. (2) The licensing authority must give to the licensee a written notice (a) states what the proposed action is; and (b) if the proposed action is to suspend the licence – states what the proposed suspension period is; and (c) if the proposed action is to vary the licence – sets out the proposed variation; and (d) sets out the ground for the proposed action; and

Regulations 2011 139 (e) outlines the facts and other circumstances forming the basis for the ground; and (f) invites the licensee to state in writing, within a specified given to the licensee, why the proposed action should not be taken. specified period, the licensing authority reasonably believes that a ground exists to take the proposed action, the licensing authority may: (a) cancel or vary the licence; or (b) suspend the licence for a period not longer than 12 months (except if the suspension is to give effect to a court order specifying a longer period of suspension). (4) The licensing authority may withdraw a suspension before the suspension is due to expire if the licensing authority reasonably believes that it is appropriate to do so.

193 When cancellation, suspension or variation takes effect The cancellation, suspension or variation of a licence by the licensing authority takes effect on: (a) the day when the licensee is given written notice by the licensing authority of the cancellation, suspension or variation and of the reasons for it; or (b) a later day specified in the notice.

194 Effect of loss of driver licence (1) A person's dangerous goods driver licence is taken to be suspended if the person's driver licence has no effect. (2) A person's dangerous goods vehicle licence for a road vehicle is taken to be suspended in relation to the road vehicle if the road vehicle is not registered.

Regulations 2011 140

195 Determinations about goods and packaging The Competent Authority may determine any or all of the (a) that a substance or article is or is not dangerous goods; (b) that dangerous goods: (i) are or are not of a particular UN Class, UN Division or Category; or (ii) are or are not of a particular Packing Group; or (iii) have a particular subsidiary hazard; (c) that goods are incompatible with particular dangerous goods; (d) that a substance or article is goods too dangerous to be transported; (e) that dangerous goods may be, or must not be, transported in or on the same cargo transport unit as other goods (whether dangerous goods or not); (f) that particular dangerous goods may be, or must not be, transported in particular packaging despite any prohibition or authorisation in the Dangerous Goods List.

196 Determinations about vehicles, routes, areas and times The Competent Authority may determine any or all of the (a) that particular dangerous goods must or must not be transported as follows: (i) in or on a particular vehicle or particular kind of vehicle; (ii) by a particular route; (iii) in or through a particular area; (iv) at a particular time or during a particular period;

Regulations 2011 141 (b) that particular dangerous goods must not be transported in quantities in excess of a particular amount; (c) that particular packaging must or must not be used in the transport of particular dangerous goods.

197 Determination must be complied with (a) a determination prohibits or regulates the doing of a thing; and (b) the determination applies to the person; and (c) the person does the thing contrary to the determination. subregulation (1) if the defendant proves that the defendant did not know, and could not reasonably have been expected to know, that the determination applied to the defendant.

198 Determinations may be subject to conditions (1) The Competent Authority may make a determination subject to any condition necessary for the safe transport of dangerous (a) a determination applies to the person; and (b) the person contravenes a condition of the determination. subregulation (2) if the defendant proves that the defendant did not know, and could not reasonably have been expected to know, that the determination applied to the defendant.

Regulations 2011 142

199 Register of determinations (1) The Competent Authority must keep a register of determinations. determinations. (3) The Competent Authority must record in the register each determination that is not an administrative determination. (4) The Competent Authority must note in the register the revocation of any determination recorded in the register.

199A Records of determinations The register of determinations kept under regulation 199(1) must include, for each determination in the register: (a) the provisions of the determination, including any conditions; and (i) if the determination was notified in the Gazette – the title of the notification and the date on which the Gazette was published; (ii) the goods, dangerous goods, packaging, vehicle, transport routes, areas or times the determination applies to; (iii) the date of the determination; (vi) the provisions of these Regulations and of the ADG Code to which the determination relates.

200 Determination contrary to regulations If a provision of these Regulations imposes an obligation on a person, and the person is authorised or permitted to act contrary to that obligation by a determination made under this Part, the provision has effect as if it stated that the person could fulfil the obligation by acting in accordance with the determination.

Regulations 2011 143

201 Applications for exemptions (1) An application for an exemption must: (a) be made in writing to the Competent Authority; and (b) be signed and dated by or for the applicant; and (c) be accompanied by the prescribed fee; and (d) contain the following information: (i) the applicant's name and address; (ii) the name of the person for whom, or a description of the class of persons for which, the exemption is sought; (iii) the provisions of these Regulations from which exemption is sought and any relevant provisions of the ADG Code; (iv) the dangerous goods for which the exemption is sought; (v) if the exemption is to relate to a vehicle, equipment, packaging or other thing – a description of the thing; (vi) the period for which the exemption is sought; (vii) the geographical area within which the exemption is to have effect; (viii) a statement of the applicant's opinion as to: (A) why compliance with the provisions mentioned in subparagraph (iii) is not reasonably practicable; and (B) why granting the exemption would be unlikely to create risk greater than that which would be the case if compliance with those provisions was required.

Regulations 2011 144 (2) An applicant must give to the Competent Authority any additional information necessary for a proper consideration of the application that the Competent Authority request in writing.

202 Register of exemptions (1) The Competent Authority must keep a register of exemptions. exemptions. (3) The Competent Authority must record in the register each exemption granted by the Competent Authority. (4) The Competent Authority must note in the register the cancellation or variation of an exemption.

202A Records of exemptions The register of exemptions kept under regulation 202(1) must include, for each exemption in the register: (a) the terms of the exemption, including any conditions; and (i) if the exemption was notified in the Gazette – the title of the notification and the date on which the Gazette was published; (ii) the name of the person to whom, or a description of the class of persons to which, the exemption applies; (iii) the date when the exemption was given; (vi) the provisions of these Regulations or the ADG Code from which the exemption exempts a person; (v) the period for which the exemption has effect; (vi) the dangerous goods, equipment, packaging, vehicle or other thing to which the exemption relates.

203 Referral to CAP (1) The Competent Authority must refer to the CAP an application for an exemption or an exemption granted by the Competent Authority if the Competent Authority considers the exemption

Regulations 2011 145 should have effect in all participating jurisdictions or participating jurisdictions including the Territory. (2) The Competent Authority must refer to the CAP an exemption having effect in the Territory and one or more other participating jurisdictions if: (a) the Competent Authority considers the exemption should be cancelled or varied; or Authority in writing that the exemption should be cancelled or varied.

204 Effect of CAP decision about applications (a) an application for an exemption or an exemption granted by the Competent Authority is referred to the CAP under regulation 203(1); and (b) the CAP decides: (i) the exemption should be granted, what the terms of the exemption should be, and that the exemption should have effect in all participating jurisdictions or (ii) the exemption should not be granted or should not have effect in the Territory.

205 Effect of CAP decision about cancellation or variation (a) an exemption is referred to the CAP under regulation 203(2); and (b) the CAP decides the exemption: (i) should, or should not, be cancelled; or (ii) should be varied (whether as proposed by the Competent Authority or differently) and should have effect as varied in all participating jurisdictions or

Regulations 2011 146 (iii) should not be varied.

Part 18 Administrative determinations and

206 Meaning of holder holder means: (a) for an administrative determination – the person to whom the determination applies; or (b) for an approval – the person to whom the approval was granted.

206A Administrative determinations The Competent Authority may make a determination that applies to one or more persons named in the administrative determination: (a) on application made under regulation 207; or (b) on the Competent Authority's own initiative under regulation 207A.

207 Applications for administrative determination or approval (1) An application for, or for the variation of, an administrative determination or approval must: (a) be made in writing to the Competent Authority; and (b) be accompanied by the prescribed fee. (2) An application for the variation of an administrative determination or approval must be accompanied by the determination or approval.

Regulations 2011 147 (3) An applicant must give to the Competent Authority any additional information necessary for a proper consideration of the application that the Competent Authority requests in writing. (4) The Competent Authority may decide to approve or refuse to approve an application made under this regulation.

207A Administrative determination on initiative of Competent Authority (1) The Competent Authority may, on its own initiative, make an administrative determination in relation to a person in accordance with this regulation. (2) Before the Competent Authority makes the administrative determination, the Competent Authority must give the person a notice that: (a) sets out the proposed determination; and (b) sets out the reasons for proposing to make the determination; and (c) outlines the facts and other circumstances forming the basis for those reasons; and (d) invites the person to state in writing, within a specified given, why the determination should not be made. specified period, the Competent Authority reasonably believes that the determination should be made, the Competent Authority may make the determination. (4) An administrative determination under this regulation may only impose a condition on a determination that is: (a) directly related to the determination; and (b) reasonably required to give effect to the determination.

208 Form of administrative determination or approval (1) An administrative determination, or an approval granted on application, must be in writing and must specify the name of the holder. (2) Any conditions to which the administrative determination or approval is subject must be specified in it.

Regulations 2011 148

209 Period of administrative determination or approval An administrative determination or approval has effect for the period specified in it.

210 Notice and reasons for refusal of applications (1) This regulation applies if the Competent Authority refuses an application for, or for the variation of, an administrative determination or approval. (2) The Competent Authority must give the applicant written notice of the refusal and of the reasons for it.

211 When administrative determinations and approvals not to be made etc. The Competent Authority must not make an administrative determination on the application of, or give an approval under these Regulations to, a person who is prohibited by a court order from involvement in the transport of dangerous goods.

212 Replacement administrative determination or approval (a) an administrative determination or approval is varied; or (b) the Competent Authority is satisfied an administrative determination or approval has been defaced, destroyed, lost or stolen. (2) The Competent Authority must give the holder a replacement administrative determination or approval.

213 Register of approvals (1) The Competent Authority must keep a register of approvals. approvals. (3) The Competent Authority must record in the register: (a) each approval granted by the Competent Authority under these Regulations; and (b) each corresponding approval.

Regulations 2011 149 (4) The Competent Authority must note in the register: (a) any cancellation or variation of an approval; and (b) any decision of the CAP reversing a decision that a corresponding approval should have effect in all participating jurisdictions including the Territory.

213A Records of approvals The register of approvals kept under regulation 213(1) must include, for each approval in the register: (a) the terms of the approval, including any conditions; and (i) the name of the person to whom the approval was given; (ii) the date when the approval was given; (iii) the provisions of these Regulations and of the ADG Code to which the approval relates; (iv) the period for which the approval has effect; (v) the dangerous goods, equipment, packaging, vehicle or other thing to which the approval relates.

214 Grounds for cancelling administrative determination or approval (1) An administrative determination made on application or approval may be cancelled if the application for it: (2) An administrative determination or approval may be cancelled if: (a) a relevant change has occurred since the determination was made or approval was granted; and (b) had the change occurred earlier the determination or approval would not have been made or granted.

Regulations 2011 150 (3) An administrative determination or approval may be cancelled if the holder is unsuitable to continue to hold the determination or approval because the person has contravened the Act, these Regulations or a corresponding law. relevant change means a change about something that the Competent Authority may or must consider in deciding whether to make the determination or grant the approval.

215 Grounds for varying administrative determinations and (1) An administrative determination made on application or approval may be varied if the application for it: (2) An administrative determination or approval may be varied if: (a) a relevant change has occurred since the determination was made or approval was granted; and (b) had the change occurred earlier, the determination or approval would have been made or granted in the way in which it is proposed to be varied. (3) An administrative determination or approval may be varied if the holder is unsuitable to continue to hold the determination or approval without variation because the person has contravened the Act, these Regulations or a corresponding law. (3A) In the case of an administrative determination that applies to more than 1 person – the Competent Authority may vary the determination by removing the name of a holder who is unsuitable in the manner described in subregulation (3), even if that person originally applied for the determination. relevant change means a change about something that the Competent Authority may or must consider in deciding whether to make the determination or grant the approval.

Regulations 2011 151

216 Cancellation and variation in dangerous situations The Competent Authority must cancel or vary an administrative determination or an approval if the Competent Authority reasonably believes that: (a) a ground exists to cancel or vary the administrative determination or approval; and (b) it is necessary to do so to avoid, eliminate or minimise a dangerous situation.

217 Cancellation giving effect to court orders (1) The Competent Authority must cancel an administrative determination or an approval if the person to whom the determination or approval applies is prohibited by a court order from involvement in the transport of dangerous goods. (2) If an approval applies to more than one person, subregulation (1) only requires the Competent Authority to ensure that the approval no longer applies to the person who is the subject of the prohibition.

218 Variation on application The Competent Authority may vary an administrative determination or approval on the application of the holder.

219 Cancellation and variation in other circumstances (a) the Competent Authority considers that a ground exists to cancel or vary an administrative determination or approval (the proposed action); and (b) regulations 216, 217 and 218 do not apply. (2) The Competent Authority must give to the holder a written notice (a) states what the proposed action is; and (b) if the proposed action is to vary the determination or approval – sets out the proposed variation; and (c) sets out the ground for the proposed action; and (d) outlines the facts and other circumstances forming the basis for the ground; and

Regulations 2011 152 (e) invites the holder to state in writing, within a specified given, why the proposed action should not be taken. specified period, the Competent Authority reasonably believes that a ground exists to take the proposed action, the Competent Authority may cancel or vary the determination or approval.

220 When cancellation or variation take effect The cancellation or variation of an administrative determination or approval by the Competent Authority takes effect on: (a) the day when the holder is given written notice by the Competent Authority of the cancellation or variation and of the reasons for it; or (b) a later day specified in the notice.

221 Referral to CAP (1) The Competent Authority must refer to the CAP an application for an approval, or an approval that is granted by the Competent Authority, if the Competent Authority considers the approval should have effect in all participating jurisdictions or participating jurisdictions including the Territory. (2) The Competent Authority must refer to the CAP an approval having effect in the Territory and one or more other participating jurisdictions if: (a) the Competent Authority considers that the approval should be cancelled or varied; or Authority in writing that the approval should be cancelled or varied.

222 Effect of CAP decision about application (a) an application for an approval, or an approval granted by the Competent Authority, is referred to the CAP under regulation 221(1); and

Regulations 2011 153 (b) the CAP decides: (i) the approval should be granted, what the terms of the approval should be, and that the approval should have effect in all participating jurisdictions or (ii) the approval should not be granted or should not have effect in the Territory.

223 Effect of CAP decision about cancellation or variation (a) an approval is referred to the CAP under regulation 221(2); and (b) the CAP decides the approval: (i) should, or should not, be cancelled; or (ii) should be varied (whether as proposed by the Competent Authority or differently) and should have effect as varied in all participating jurisdictions or (iii) should not be varied. (2) The Competent Authority must have regard to CAP's decision.

223A Referral to CAP (1) The Competent Authority must refer to the CAP an administrative determination or an application for an administrative determination, if the Competent Authority considers the administrative determination should have effect in including the Territory.

Regulations 2011 154 (2) The Competent Authority must refer to the CAP an administrative determination having effect in the Territory and one or more other participating jurisdictions if: (a) the Competent Authority considers that the administrative determination should be cancelled or varied; or Authority in writing that the administrative determination should be cancelled or varied.

223B Effect of CAP decision about administrative determination If the Competent Authority refers an administrative determination or an application for an administrative determination to the CAP under regulation 223A(1), the Competent Authority must have regard to any decision of the CAP that: (a) the administrative determination should be granted, what the terms of the administrative determination should be and that the administrative determination should have effect in including the Territory; or (b) the administrative determination should not be granted or should not have effect in the Territory.

223C Effect of CAP decision about cancellation or variation If the Competent Authority refers an administrative determination to the CAP under regulation 223A(2), the Competent Authority must have regard to any decision of the CAP that the administrative determination: (a) should, or should not, be cancelled; or (b) should be varied (whether as proposed by the Competent Authority or differently) and should have effect as varied in including the Territory; or (c) should not be varied.

Division 1 Mutual recognition of determinations, exemptions, approvals and licences Regulations 2011 155 Division 1 Mutual recognition of determinations, exemptions, approvals and licences 224 Corresponding determinations (1) This regulation applies to a determination made by the (a) the determination is made under a provision of a corresponding law that corresponds to regulation 195 or 196 (the relevant NT provision); and (b) the determination has effect in the other jurisdiction; and (i) the CAP: (A) has decided that the determination should have effect in all participating jurisdictions or participating jurisdictions including the Territory; and (B) has not reversed the decision; or (ii) the determination is an administrative determination. (2) The determination has effect in the Territory as if it were a determination made by the Competent Authority under the relevant NT provision.

225 Corresponding exemptions (1) This regulation applies to an exemption granted by the (a) the exemption is an exemption from a provision of a corresponding law that corresponds to a provision (the relevant NT provision) of these Regulations; and (b) the exemption has effect in the other jurisdiction; and (c) the CAP: (i) has decided that the exemption should have effect in all participating jurisdictions or participating jurisdictions including the Territory; and

Division 1 Mutual recognition of determinations, exemptions, approvals and licences Regulations 2011 156 (ii) has not reversed the decision. (2) The exemption has effect in the Territory as if it were an exemption granted by the Competent Authority from the relevant NT provision for 10 years after the day on which the CAP made its decision unless: (a) the decision is sooner reversed by the CAP; or (b) the exemption is sooner cancelled or varied by the corresponding authority; or (c) the exemption sooner expires or otherwise ceases to have effect.

226 Corresponding approvals (1) This regulation applies to an approval granted by the (a) the approval is granted under a provision of a corresponding law that corresponds to regulation 59, 63, 101, 102, 126, 151 or 160 (the relevant NT provision); and (b) the approval has effect in the other jurisdiction; and (c) the CAP: (i) has decided that the approval should have effect in all participating jurisdictions or participating jurisdictions including the Territory; and (ii) has not reversed the decision. (2) The approval has effect in the Territory as if it were an approval granted by the Competent Authority under the relevant NT