Commonwealth legislation

Vehicle Standard (Australian Design Rule 87/00 – Cornering Lamps) 2016

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

4/10 complexity

This instrument prescribes the technical (photometric) requirements for vehicle cornering lamps and requires vehicles subject to it to meet those requirements in Appendix A, subject to specified exemptions. It affects vehicle manufacturers, importers and approval authorities because compliance is required when ADR 13 or ADR 67 make cornering lamps mandatory, optional or prohibited.

It also declares UN Regulation No.119 (01 series) equivalent and substitutes references to certain UN Regulations with ADR 51/00 and ADR 13/00, providing an alternative conformity route that shifts testing and approval steps to the referenced standards.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Vehicle Standard (Australian Design Rule 87/00 – Cornering Lamps) 2016.

CONTENTS

LEGISLATIVE PROVISIONS.....................................3
FUNCTION....................................................3
APPLICABILITY...............................................3
DEFINITIONS..................................................3
REQUIREMENTS...............................................3
EXEMPTIONS AND ALTERNATIVE PROCEDURES.................3
ALTERNATIVE STANDARDS....................................4

APPENDIX A.........................................................5

NOTES .............................................................32

LEGISLATIVE PROVISIONS
1. Name of Standard
  1. This Standard is the Vehicle Standard (Australian Design Rule 87/00 – Cornering Lamps) 2016.
  2. This Standard may also be cited as Australian Design Rule 87/00 – Cornering Lamps.
FUNCTION
1. The function of this standard is to prescribe photometric requirements for Cornering Lamps, which are used to provide supplementary illumination of that part of the road which is located near the forward corner of the vehicle at the side towards which the vehicle is going to turn.
APPLICABILITY
1. The circumstances under which Cornering Lamps are mandatory, optional or prohibited are set out in either ADR 13/…, or 67/… as applicable.
DEFINITIONS
1. For vehicle categories, definitions and meanings used in this standard, refer to:
  1. Definitions in Appendix A of this standard; and where there is no conflict;
  2. Vehicle Standard (Australian Design Rule Definitions and Vehicle Categories) 2005.
REQUIREMENTS
1. Vehicles subject to the requirements of this standard must comply with the requirements of Appendix A, except as varied by Section 6 Exemptions and Alternative Procedures.
2. In place of Regulation No 37 where referenced in Appendix A, read ADR 51/00.
3. In place of Regulation No 48 where referenced in Appendix A, read ADR 13/00.
EXEMPTIONS AND ALTERNATIVE PROCEDURES
1. Compliance with the following parts, sections and annexes of Appendix A is not required for the purposes of this standard:

Section 1 Scope

Section 2 Application for approval

Section 3 Markings

Section 4 Approval

Section 10 Penalties for non-conformity of production

Section 11 Production definitely discontinued

Section 12 Names and addresses of Technical Services responsible for conducting approval tests, and of Type Approval Authorities

Section 13 Transitional provisions

Annex 1 Communication

Annex 2 Examples of arrangements of approval marks

ALTERNATIVE STANDARDS
1. The technical requirements of the United Nations Regulation No. 119 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF CORNERING LAMPS FOR POWER-DRIVEN VEHICLES, incorporating the 01 series of amendments, shall be deemed to be equivalent to the technical requirements of this standard.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

CONTENTS CONTENTS

LEGISLATIVE PROVISIONS.....................................3
FUNCTION....................................................3
APPLICABILITY...............................................3
DEFINITIONS..................................................3
REQUIREMENTS...............................................3
EXEMPTIONS AND ALTERNATIVE PROCEDURES.................3
ALTERNATIVE STANDARDS....................................4

APPENDIX A.........................................................5

NOTES .............................................................32

LEGISLATIVE PROVISIONS
1. Name of Standard
  1. This Standard is the Vehicle Standard (Australian Design Rule 87/00 – Cornering Lamps) 2016.
  2. This Standard may also be cited as Australian Design Rule 87/00 – Cornering Lamps.
FUNCTION
1. The function of this standard is to prescribe photometric requirements for Cornering Lamps, which are used to provide supplementary illumination of that part of the road which is located near the forward corner of the vehicle at the side towards which the vehicle is going to turn.
APPLICABILITY
1. The circumstances under which Cornering Lamps are mandatory, optional or prohibited are set out in either ADR 13/…, or 67/… as applicable.
DEFINITIONS
1. For vehicle categories, definitions and meanings used in this standard, refer to:
  1. Definitions in Appendix A of this standard; and where there is no conflict;
  2. Vehicle Standard (Australian Design Rule Definitions and Vehicle Categories) 2005.
REQUIREMENTS
1. Vehicles subject to the requirements of this standard must comply with the requirements of Appendix A, except as varied by Section 6 Exemptions and Alternative Procedures.
2. In place of Regulation No 37 where referenced in Appendix A, read ADR 51/00.
3. In place of Regulation No 48 where referenced in Appendix A, read ADR 13/00.
EXEMPTIONS AND ALTERNATIVE PROCEDURES