Part 1
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
Commonwealth legislation
This Act has been repealed and is no longer in force. It is retained for historical reference.
This Notice requires manufacturers, importers and suppliers who place RF‑emitting devices (phones, modems, two‑way radios) on the Australian market to register before using the RCM and to classify devices as Category A or B so they meet health/safety exposure rules.
Suppliers must meet graded conformity steps (including SAR testing for devices used ≤20 cm from the body), apply durable compliance marks or packaging/print/electronic labels, keep records for 5 years, and face ACMA inspection and sample testing with cost consequences.
Want the full deep dive?
Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.
Direct links to the current provisions in Radiocommunications (Compliance Labelling - Electromagnetic Radiation) Notice 2003.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Part does not apply in relation to a variant of a device if: (a) the relevant requirements of this Part have been met in relation to the device; and (b) the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
Before a supplier applies a compliance label consisting of the RCM to a device, the supplier must: (a) be registered on the national database; or (b) if the ACMA has not designated in writing a national database for the purposes of this Division—have been issued a supplier code number.
Note: Under section 187 of the Act, a supplier that fails to comply with requirements that must be met before a label has been applied to a device may be subject to a pecuniary penalty.
(1) To be registered on the national database a supplier must, using a method which the database indicates is a method for including information on the database, provide: (a) information identifying the supplier; (b) the supplier’s address in Australia; and (c) the name and contact details of a representative of the supplier. (2) For paragraph (1)(a), information identifying a supplier consists of the supplier’s ABN and 1 of the following pieces of information in relation to the supplier: (a) if the supplier is a body corporate, the name of the body corporate; (b) if the supplier is an individual, the name of the individual; (c) a business name used by the supplier in connection with its business as a supplier and registered as a business name under the Business Names Registration Act 2011. (3) If the information provided by a supplier for inclusion in the national database subsequently changes, the supplier must, within 30 days after the change occurs, update the national database with the changed information using a method which the database indicates is a method for updating information on the database. (4) In this section:
representative of the supplier means:
(a) an employee of the supplier;
(b) an officer of the supplier; or
(c) a person authorised in writing for the purposes of this section by the supplier or an employee or officer of the supplier.
officer of the supplier means:
(a) if the supplier is a corporation for the purposes of the Corporations Act 2001, an officer of a corporation as that term is defined in section 9 of the Corporations Act 2001; or
(b) if the supplier is an entity that is neither an individual nor a corporation for the purposes of the Corporations Act 2001, an officer of that entity as defined in section 9 of the Corporations Act 2001.
Note 1: The requirement for a supplier to update the information provided by it for inclusion in the national database imposed under subsection 10A(3) is an ongoing requirement. Under section 187A of the Act, a supplier that fails to comply with a specific requirement that must be met after a label has been applied to a device may be subject to a pecuniary penalty.
Note 2: Information provided by a supplier for inclusion on the national database for the purposes of this Notice will be made publicly available.
Before a supplier applies a compliance label consisting of the C‑Tick mark to a device, the supplier must have been issued a supplier code number by the ACMA.
(1) This section applies unless the ACMA has designated in writing a national database for the purposes of this Division. (2) A supplier may apply in writing to the ACMA for a supplier code number. (3) The application must be in a form approved by the ACMA.
Note: The ACMA makes approved forms available on its website.
(4) Upon such application being made, the ACMA may issue to the supplier a supplier code number.
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device. (2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if: (a) the device complies with the applicable standard; and (b) the device was manufactured outside Australia; and (c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device. (3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2)(c) is taken to include a reference to a person who manufactures a device outside Australia. (4) A manufacturer that manufactures a device outside Australia and made a declaration of conformity in accordance with paragraph (2)(c) need not provide: (a) an ABN; or (b) an Australian Company Number (ACN); or (c) an Australian Registered Body Number (ARBN).
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device. (2) The compliance level for a device is: (a) for a category A device—compliance level 1; and (b) for a category B device for which the normal position of use is more than 20cm from the human body—compliance level 2; and (c) for a category B device for which the normal position of use is not more than 20cm from the human body—compliance level 3.
To comply with compliance level 1, the supplier of a device must: (a) prepare a description of the device; and (b) make a declaration of conformity for the device in accordance with section 11.
Note: Subsection 11(2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
To comply with compliance level 2, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessment under section 16.
To comply with compliance level 3, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessments under section 16 by an accredited testing body.
If a device is assessed for conformity with the applicable standard, the supplier of the device must obtain from the person that assessed the device a report addressing: (a) the measurements or evaluation methods that were used; and (b) the results of the measurements or evaluations, including any measurement or evaluation data; and (c) whether the results of the measurements or evaluations show that the device meets the applicable standard.
(1) This Part applies to a device if the supplier for the device has complied with the compliance level for the device under Part 2. (2) This Part also applies to a variant of the device.
(1) If a device is manufactured in Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the manufacturer; (b) an agent of the manufacturer; (c) a person who is authorised by the manufacturer, or an agent of the manufacturer, to apply labels on behalf of the manufacturer or agent.
Note: A compliance label is described in subsection 19(1).
(2) If a device is manufactured outside Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the importer; (b) an agent of the importer; (c) a person outside Australia who is authorised by the importer or agent to apply labels on behalf of the importer or agent.
(1) A compliance label for a device is a label that meets the requirements of this section and sections 19A to 19D. (2) The label must consist of either: (a) the RCM; or (b) if the label is applied before 1 March 2016—either of the compliance marks.
Location of compliance label
(3) Subject to sections 19C and 19D, the label must be placed on the device on a place that is accessible by the user.
Note: Section 19C deals with situations where applying a label to the surface of a device is not possible or practical. Section 19D gives a supplier the option of labelling some types of device electronically.
(4) A label is not accessible if it is necessary to use a specialised tool to gain access to it.
(1) A compliance label must be durable. (2) A compliance label must be applied to a device: (a) permanently; or (b) in a way that makes removal or obliteration difficult.
A compliance mark must be at least 3 mm high.
Note: This Notice does not prevent a supplier from applying its own additional supplier identification details onto a device.
(1) If it is not possible to apply a compliance label to the surface of a device because of the size or physical nature of the device, or it is not practical to apply a compliance label to the surface of a device, the compliance label must be applied to: (a) the external surface of the packaging used for the device; and (b) the documentation (including any warranty or guarantee certificates) that accompanies the device when it is supplied to the user. (2) The compliance label applied to the external surface of the packaging used for the device must: (a) occupy an area that is greater than 1% of that external surface; and (b) be clearly visible. (3) The supplier must make and keep a record of: (a) the reasons why subsection (1) applies to the device; and (b) where each compliance label is applied.
(1) A supplier may apply a compliance label to a device using the built‑in display of the device. (2) The supplier must ensure that the documentation that accompanies the device when it is supplied to the user sets out a method for displaying the compliance label. (3) The compliance label must be applied to the device in a way that would make it difficult to prevent the display of the label when the method set out in the documentation is used. (4) Subsection 19(3) and sections 19A and 19C do not apply to a label applied under this section.
A compliance record is a record that must be kept under section 21.
(1) If a supplier of a device applies a label to the device as a compliance label, the supplier must keep, for 5 years after the device has ceased to be supplied in Australia: (a) the declaration of conformity relating to the device; and (b) the description of the device; and (c) for a category B device—the records mentioned in section 22; and (d) for a device to which a compliance label is not applied because of section 19C—the records mentioned in subsection 19C(3). (2) If an agent of a manufacturer or importer keeps records for the manufacturer or importer that must be kept under subsection (1), the agent must also keep a copy of its agency agreement with the manufacturer or importer for the same period as those records are kept. (3) A compliance record: (a) must be in English; and (b) may be a copy of an original record; and (c) may be kept in electronic form.
For paragraph 21(1)(c), the records are: (a) the report issued under section 16 showing that the device meets the applicable standard; and (b) for a variant—a statement by the supplier that: (i) identifies the device and its variant; and (ii) describes the differences between the device and its variant; and (iii) provides a technical rationale for the conformity of the variant; and (iv) includes evidence that the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
If a supplier of a device applies a label to the device as a compliance label, the supplier must ensure that the compliance records for the device are available at the principal business address in Australia of the supplier.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer, may in writing, require the supplier to give to the officer specified compliance records. (2) If the request is for a specified record, the supplier must produce the record within 10 working days after the day specified in the request. (3) If the request is for a specified circuit diagram or manual for the device, the supplier must produce the document within 30 working days after the day specified in the request. (4) After receiving the information from the supplier, the authorised officer must give the supplier a receipt for the information supplied. (5) The authorised officer: (a) may make copies of the records; and (b) must return the records given by the supplier as soon as practicable and, in any case, not more than 60 days after receiving the records. (6) If an authorised officer believes that the records kept by the supplier do not provide sufficient evidence that the device complies with the applicable standard, the officer may, in writing, require the supplier to give to the officer a test report from an accredited testing body showing that the device either complies or does not comply with the applicable standard.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard. (2) The supplier must comply with the request within 10 working days after the day specified in the request. (3) The supplier must attempt to obtain from the laboratory a receipt that specifies the samples have been received and the date when they were received. (4) On receiving a request from the ACMA, the supplier must: (a) give the receipt to the ACMA; or (b) if the supplier is unable to obtain a receipt—satisfy the ACMA that the supplier made reasonable attempts to obtain a receipt. (5) The ACMA must make arrangements to ensure that the samples are returned to the supplier within a reasonable period after they have been tested. (6) If testing required under section 25 shows that the device does not comply with the standard, the supplier must meet the financial costs of the testing. (7) If testing required under section 25 shows that the device complies with the standard, the ACMA must meet the financial costs of the testing. (8) In this section:
device includes a variant of the device.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Part does not apply in relation to a variant of a device if: (a) the relevant requirements of this Part have been met in relation to the device; and (b) the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
Before a supplier applies a compliance label consisting of the RCM to a device, the supplier must: (a) be registered on the national database; or (b) if the ACMA has not designated in writing a national database for the purposes of this Division—have been issued a supplier code number.
Note: Under section 187 of the Act, a supplier that fails to comply with requirements that must be met before a label has been applied to a device may be subject to a pecuniary penalty.
(1) To be registered on the national database a supplier must, using a method which the database indicates is a method for including information on the database, provide: (a) information identifying the supplier; (b) the supplier’s address in Australia; and (c) the name and contact details of a representative of the supplier. (2) For paragraph (1)(a), information identifying a supplier consists of the supplier’s ABN and 1 of the following pieces of information in relation to the supplier: (a) if the supplier is a body corporate, the name of the body corporate; (b) if the supplier is an individual, the name of the individual; (c) a business name used by the supplier in connection with its business as a supplier and registered as a business name under the Business Names Registration Act 2011. (3) If the information provided by a supplier for inclusion in the national database subsequently changes, the supplier must, within 30 days after the change occurs, update the national database with the changed information using a method which the database indicates is a method for updating information on the database. (4) In this section:
representative of the supplier means:
(a) an employee of the supplier;
(b) an officer of the supplier; or
(c) a person authorised in writing for the purposes of this section by the supplier or an employee or officer of the supplier.
officer of the supplier means:
(a) if the supplier is a corporation for the purposes of the Corporations Act 2001, an officer of a corporation as that term is defined in section 9 of the Corporations Act 2001; or
(b) if the supplier is an entity that is neither an individual nor a corporation for the purposes of the Corporations Act 2001, an officer of that entity as defined in section 9 of the Corporations Act 2001.
Note 1: The requirement for a supplier to update the information provided by it for inclusion in the national database imposed under subsection 10A(3) is an ongoing requirement. Under section 187A of the Act, a supplier that fails to comply with a specific requirement that must be met after a label has been applied to a device may be subject to a pecuniary penalty.
Note 2: Information provided by a supplier for inclusion on the national database for the purposes of this Notice will be made publicly available.
Before a supplier applies a compliance label consisting of the C‑Tick mark to a device, the supplier must have been issued a supplier code number by the ACMA.
(1) This section applies unless the ACMA has designated in writing a national database for the purposes of this Division. (2) A supplier may apply in writing to the ACMA for a supplier code number. (3) The application must be in a form approved by the ACMA.
Note: The ACMA makes approved forms available on its website.
(4) Upon such application being made, the ACMA may issue to the supplier a supplier code number.
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device. (2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if: (a) the device complies with the applicable standard; and (b) the device was manufactured outside Australia; and (c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device. (3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2)(c) is taken to include a reference to a person who manufactures a device outside Australia. (4) A manufacturer that manufactures a device outside Australia and made a declaration of conformity in accordance with paragraph (2)(c) need not provide: (a) an ABN; or (b) an Australian Company Number (ACN); or (c) an Australian Registered Body Number (ARBN).
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device. (2) The compliance level for a device is: (a) for a category A device—compliance level 1; and (b) for a category B device for which the normal position of use is more than 20cm from the human body—compliance level 2; and (c) for a category B device for which the normal position of use is not more than 20cm from the human body—compliance level 3.
To comply with compliance level 1, the supplier of a device must: (a) prepare a description of the device; and (b) make a declaration of conformity for the device in accordance with section 11.
Note: Subsection 11(2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
To comply with compliance level 2, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessment under section 16.
To comply with compliance level 3, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessments under section 16 by an accredited testing body.
If a device is assessed for conformity with the applicable standard, the supplier of the device must obtain from the person that assessed the device a report addressing: (a) the measurements or evaluation methods that were used; and (b) the results of the measurements or evaluations, including any measurement or evaluation data; and (c) whether the results of the measurements or evaluations show that the device meets the applicable standard.
(1) This Part applies to a device if the supplier for the device has complied with the compliance level for the device under Part 2. (2) This Part also applies to a variant of the device.
(1) If a device is manufactured in Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the manufacturer; (b) an agent of the manufacturer; (c) a person who is authorised by the manufacturer, or an agent of the manufacturer, to apply labels on behalf of the manufacturer or agent.
Note: A compliance label is described in subsection 19(1).
(2) If a device is manufactured outside Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the importer; (b) an agent of the importer; (c) a person outside Australia who is authorised by the importer or agent to apply labels on behalf of the importer or agent.
(1) A compliance label for a device is a label that meets the requirements of this section and sections 19A to 19D. (2) The label must consist of either: (a) the RCM; or (b) if the label is applied before 1 March 2016—either of the compliance marks.
Location of compliance label
(3) Subject to sections 19C and 19D, the label must be placed on the device on a place that is accessible by the user.
Note: Section 19C deals with situations where applying a label to the surface of a device is not possible or practical. Section 19D gives a supplier the option of labelling some types of device electronically.
(4) A label is not accessible if it is necessary to use a specialised tool to gain access to it.
(1) A compliance label must be durable. (2) A compliance label must be applied to a device: (a) permanently; or (b) in a way that makes removal or obliteration difficult.
A compliance mark must be at least 3 mm high.
Note: This Notice does not prevent a supplier from applying its own additional supplier identification details onto a device.
(1) If it is not possible to apply a compliance label to the surface of a device because of the size or physical nature of the device, or it is not practical to apply a compliance label to the surface of a device, the compliance label must be applied to: (a) the external surface of the packaging used for the device; and (b) the documentation (including any warranty or guarantee certificates) that accompanies the device when it is supplied to the user. (2) The compliance label applied to the external surface of the packaging used for the device must: (a) occupy an area that is greater than 1% of that external surface; and (b) be clearly visible. (3) The supplier must make and keep a record of: (a) the reasons why subsection (1) applies to the device; and (b) where each compliance label is applied.
(1) A supplier may apply a compliance label to a device using the built‑in display of the device. (2) The supplier must ensure that the documentation that accompanies the device when it is supplied to the user sets out a method for displaying the compliance label. (3) The compliance label must be applied to the device in a way that would make it difficult to prevent the display of the label when the method set out in the documentation is used. (4) Subsection 19(3) and sections 19A and 19C do not apply to a label applied under this section.
A compliance record is a record that must be kept under section 21.
(1) If a supplier of a device applies a label to the device as a compliance label, the supplier must keep, for 5 years after the device has ceased to be supplied in Australia: (a) the declaration of conformity relating to the device; and (b) the description of the device; and (c) for a category B device—the records mentioned in section 22; and (d) for a device to which a compliance label is not applied because of section 19C—the records mentioned in subsection 19C(3). (2) If an agent of a manufacturer or importer keeps records for the manufacturer or importer that must be kept under subsection (1), the agent must also keep a copy of its agency agreement with the manufacturer or importer for the same period as those records are kept. (3) A compliance record: (a) must be in English; and (b) may be a copy of an original record; and (c) may be kept in electronic form.
For paragraph 21(1)(c), the records are: (a) the report issued under section 16 showing that the device meets the applicable standard; and (b) for a variant—a statement by the supplier that: (i) identifies the device and its variant; and (ii) describes the differences between the device and its variant; and (iii) provides a technical rationale for the conformity of the variant; and (iv) includes evidence that the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
If a supplier of a device applies a label to the device as a compliance label, the supplier must ensure that the compliance records for the device are available at the principal business address in Australia of the supplier.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer, may in writing, require the supplier to give to the officer specified compliance records. (2) If the request is for a specified record, the supplier must produce the record within 10 working days after the day specified in the request. (3) If the request is for a specified circuit diagram or manual for the device, the supplier must produce the document within 30 working days after the day specified in the request. (4) After receiving the information from the supplier, the authorised officer must give the supplier a receipt for the information supplied. (5) The authorised officer: (a) may make copies of the records; and (b) must return the records given by the supplier as soon as practicable and, in any case, not more than 60 days after receiving the records. (6) If an authorised officer believes that the records kept by the supplier do not provide sufficient evidence that the device complies with the applicable standard, the officer may, in writing, require the supplier to give to the officer a test report from an accredited testing body showing that the device either complies or does not comply with the applicable standard.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard. (2) The supplier must comply with the request within 10 working days after the day specified in the request. (3) The supplier must attempt to obtain from the laboratory a receipt that specifies the samples have been received and the date when they were received. (4) On receiving a request from the ACMA, the supplier must: (a) give the receipt to the ACMA; or (b) if the supplier is unable to obtain a receipt—satisfy the ACMA that the supplier made reasonable attempts to obtain a receipt. (5) The ACMA must make arrangements to ensure that the samples are returned to the supplier within a reasonable period after they have been tested. (6) If testing required under section 25 shows that the device does not comply with the standard, the supplier must meet the financial costs of the testing. (7) If testing required under section 25 shows that the device complies with the standard, the ACMA must meet the financial costs of the testing. (8) In this section:
device includes a variant of the device.
This Part does not apply in relation to a variant of a device if: (a) the relevant requirements of this Part have been met in relation to the device; and (b) the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Part does not apply in relation to a variant of a device if: (a) the relevant requirements of this Part have been met in relation to the device; and (b) the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
Before a supplier applies a compliance label consisting of the RCM to a device, the supplier must: (a) be registered on the national database; or (b) if the ACMA has not designated in writing a national database for the purposes of this Division—have been issued a supplier code number.
Note: Under section 187 of the Act, a supplier that fails to comply with requirements that must be met before a label has been applied to a device may be subject to a pecuniary penalty.
(1) To be registered on the national database a supplier must, using a method which the database indicates is a method for including information on the database, provide: (a) information identifying the supplier; (b) the supplier’s address in Australia; and (c) the name and contact details of a representative of the supplier. (2) For paragraph (1)(a), information identifying a supplier consists of the supplier’s ABN and 1 of the following pieces of information in relation to the supplier: (a) if the supplier is a body corporate, the name of the body corporate; (b) if the supplier is an individual, the name of the individual; (c) a business name used by the supplier in connection with its business as a supplier and registered as a business name under the Business Names Registration Act 2011. (3) If the information provided by a supplier for inclusion in the national database subsequently changes, the supplier must, within 30 days after the change occurs, update the national database with the changed information using a method which the database indicates is a method for updating information on the database. (4) In this section:
representative of the supplier means:
(a) an employee of the supplier;
(b) an officer of the supplier; or
(c) a person authorised in writing for the purposes of this section by the supplier or an employee or officer of the supplier.
officer of the supplier means:
(a) if the supplier is a corporation for the purposes of the Corporations Act 2001, an officer of a corporation as that term is defined in section 9 of the Corporations Act 2001; or
(b) if the supplier is an entity that is neither an individual nor a corporation for the purposes of the Corporations Act 2001, an officer of that entity as defined in section 9 of the Corporations Act 2001.
Note 1: The requirement for a supplier to update the information provided by it for inclusion in the national database imposed under subsection 10A(3) is an ongoing requirement. Under section 187A of the Act, a supplier that fails to comply with a specific requirement that must be met after a label has been applied to a device may be subject to a pecuniary penalty.
Note 2: Information provided by a supplier for inclusion on the national database for the purposes of this Notice will be made publicly available.
Before a supplier applies a compliance label consisting of the C‑Tick mark to a device, the supplier must have been issued a supplier code number by the ACMA.
(1) This section applies unless the ACMA has designated in writing a national database for the purposes of this Division. (2) A supplier may apply in writing to the ACMA for a supplier code number. (3) The application must be in a form approved by the ACMA.
Note: The ACMA makes approved forms available on its website.
(4) Upon such application being made, the ACMA may issue to the supplier a supplier code number.
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device. (2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if: (a) the device complies with the applicable standard; and (b) the device was manufactured outside Australia; and (c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device. (3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2)(c) is taken to include a reference to a person who manufactures a device outside Australia. (4) A manufacturer that manufactures a device outside Australia and made a declaration of conformity in accordance with paragraph (2)(c) need not provide: (a) an ABN; or (b) an Australian Company Number (ACN); or (c) an Australian Registered Body Number (ARBN).
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device. (2) The compliance level for a device is: (a) for a category A device—compliance level 1; and (b) for a category B device for which the normal position of use is more than 20cm from the human body—compliance level 2; and (c) for a category B device for which the normal position of use is not more than 20cm from the human body—compliance level 3.
To comply with compliance level 1, the supplier of a device must: (a) prepare a description of the device; and (b) make a declaration of conformity for the device in accordance with section 11.
Note: Subsection 11(2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
To comply with compliance level 2, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessment under section 16.
To comply with compliance level 3, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessments under section 16 by an accredited testing body.
If a device is assessed for conformity with the applicable standard, the supplier of the device must obtain from the person that assessed the device a report addressing: (a) the measurements or evaluation methods that were used; and (b) the results of the measurements or evaluations, including any measurement or evaluation data; and (c) whether the results of the measurements or evaluations show that the device meets the applicable standard.
(1) This Part applies to a device if the supplier for the device has complied with the compliance level for the device under Part 2. (2) This Part also applies to a variant of the device.
(1) If a device is manufactured in Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the manufacturer; (b) an agent of the manufacturer; (c) a person who is authorised by the manufacturer, or an agent of the manufacturer, to apply labels on behalf of the manufacturer or agent.
Note: A compliance label is described in subsection 19(1).
(2) If a device is manufactured outside Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the importer; (b) an agent of the importer; (c) a person outside Australia who is authorised by the importer or agent to apply labels on behalf of the importer or agent.
(1) A compliance label for a device is a label that meets the requirements of this section and sections 19A to 19D. (2) The label must consist of either: (a) the RCM; or (b) if the label is applied before 1 March 2016—either of the compliance marks.
Location of compliance label
(3) Subject to sections 19C and 19D, the label must be placed on the device on a place that is accessible by the user.
Note: Section 19C deals with situations where applying a label to the surface of a device is not possible or practical. Section 19D gives a supplier the option of labelling some types of device electronically.
(4) A label is not accessible if it is necessary to use a specialised tool to gain access to it.
(1) A compliance label must be durable. (2) A compliance label must be applied to a device: (a) permanently; or (b) in a way that makes removal or obliteration difficult.
A compliance mark must be at least 3 mm high.
Note: This Notice does not prevent a supplier from applying its own additional supplier identification details onto a device.
(1) If it is not possible to apply a compliance label to the surface of a device because of the size or physical nature of the device, or it is not practical to apply a compliance label to the surface of a device, the compliance label must be applied to: (a) the external surface of the packaging used for the device; and (b) the documentation (including any warranty or guarantee certificates) that accompanies the device when it is supplied to the user. (2) The compliance label applied to the external surface of the packaging used for the device must: (a) occupy an area that is greater than 1% of that external surface; and (b) be clearly visible. (3) The supplier must make and keep a record of: (a) the reasons why subsection (1) applies to the device; and (b) where each compliance label is applied.
(1) A supplier may apply a compliance label to a device using the built‑in display of the device. (2) The supplier must ensure that the documentation that accompanies the device when it is supplied to the user sets out a method for displaying the compliance label. (3) The compliance label must be applied to the device in a way that would make it difficult to prevent the display of the label when the method set out in the documentation is used. (4) Subsection 19(3) and sections 19A and 19C do not apply to a label applied under this section.
A compliance record is a record that must be kept under section 21.
(1) If a supplier of a device applies a label to the device as a compliance label, the supplier must keep, for 5 years after the device has ceased to be supplied in Australia: (a) the declaration of conformity relating to the device; and (b) the description of the device; and (c) for a category B device—the records mentioned in section 22; and (d) for a device to which a compliance label is not applied because of section 19C—the records mentioned in subsection 19C(3). (2) If an agent of a manufacturer or importer keeps records for the manufacturer or importer that must be kept under subsection (1), the agent must also keep a copy of its agency agreement with the manufacturer or importer for the same period as those records are kept. (3) A compliance record: (a) must be in English; and (b) may be a copy of an original record; and (c) may be kept in electronic form.
For paragraph 21(1)(c), the records are: (a) the report issued under section 16 showing that the device meets the applicable standard; and (b) for a variant—a statement by the supplier that: (i) identifies the device and its variant; and (ii) describes the differences between the device and its variant; and (iii) provides a technical rationale for the conformity of the variant; and (iv) includes evidence that the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
If a supplier of a device applies a label to the device as a compliance label, the supplier must ensure that the compliance records for the device are available at the principal business address in Australia of the supplier.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer, may in writing, require the supplier to give to the officer specified compliance records. (2) If the request is for a specified record, the supplier must produce the record within 10 working days after the day specified in the request. (3) If the request is for a specified circuit diagram or manual for the device, the supplier must produce the document within 30 working days after the day specified in the request. (4) After receiving the information from the supplier, the authorised officer must give the supplier a receipt for the information supplied. (5) The authorised officer: (a) may make copies of the records; and (b) must return the records given by the supplier as soon as practicable and, in any case, not more than 60 days after receiving the records. (6) If an authorised officer believes that the records kept by the supplier do not provide sufficient evidence that the device complies with the applicable standard, the officer may, in writing, require the supplier to give to the officer a test report from an accredited testing body showing that the device either complies or does not comply with the applicable standard.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard. (2) The supplier must comply with the request within 10 working days after the day specified in the request. (3) The supplier must attempt to obtain from the laboratory a receipt that specifies the samples have been received and the date when they were received. (4) On receiving a request from the ACMA, the supplier must: (a) give the receipt to the ACMA; or (b) if the supplier is unable to obtain a receipt—satisfy the ACMA that the supplier made reasonable attempts to obtain a receipt. (5) The ACMA must make arrangements to ensure that the samples are returned to the supplier within a reasonable period after they have been tested. (6) If testing required under section 25 shows that the device does not comply with the standard, the supplier must meet the financial costs of the testing. (7) If testing required under section 25 shows that the device complies with the standard, the ACMA must meet the financial costs of the testing. (8) In this section:
device includes a variant of the device.
Before a supplier applies a compliance label consisting of the RCM to a device, the supplier must: (a) be registered on the national database; or (b) if the ACMA has not designated in writing a national database for the purposes of this Division—have been issued a supplier code number.
Note: Under section 187 of the Act, a supplier that fails to comply with requirements that must be met before a label has been applied to a device may be subject to a pecuniary penalty.
(1) To be registered on the national database a supplier must, using a method which the database indicates is a method for including information on the database, provide: (a) information identifying the supplier; (b) the supplier’s address in Australia; and (c) the name and contact details of a representative of the supplier. (2) For paragraph (1)(a), information identifying a supplier consists of the supplier’s ABN and 1 of the following pieces of information in relation to the supplier: (a) if the supplier is a body corporate, the name of the body corporate; (b) if the supplier is an individual, the name of the individual; (c) a business name used by the supplier in connection with its business as a supplier and registered as a business name under the Business Names Registration Act 2011. (3) If the information provided by a supplier for inclusion in the national database subsequently changes, the supplier must, within 30 days after the change occurs, update the national database with the changed information using a method which the database indicates is a method for updating information on the database. (4) In this section:
representative of the supplier means:
(a) an employee of the supplier;
(b) an officer of the supplier; or
(c) a person authorised in writing for the purposes of this section by the supplier or an employee or officer of the supplier.
officer of the supplier means:
(a) if the supplier is a corporation for the purposes of the Corporations Act 2001, an officer of a corporation as that term is defined in section 9 of the Corporations Act 2001; or
(b) if the supplier is an entity that is neither an individual nor a corporation for the purposes of the Corporations Act 2001, an officer of that entity as defined in section 9 of the Corporations Act 2001.
Note 1: The requirement for a supplier to update the information provided by it for inclusion in the national database imposed under subsection 10A(3) is an ongoing requirement. Under section 187A of the Act, a supplier that fails to comply with a specific requirement that must be met after a label has been applied to a device may be subject to a pecuniary penalty.
Note 2: Information provided by a supplier for inclusion on the national database for the purposes of this Notice will be made publicly available.
Before a supplier applies a compliance label consisting of the C‑Tick mark to a device, the supplier must have been issued a supplier code number by the ACMA.
(1) This section applies unless the ACMA has designated in writing a national database for the purposes of this Division. (2) A supplier may apply in writing to the ACMA for a supplier code number. (3) The application must be in a form approved by the ACMA.
Note: The ACMA makes approved forms available on its website.
(4) Upon such application being made, the ACMA may issue to the supplier a supplier code number.
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device. (2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if: (a) the device complies with the applicable standard; and (b) the device was manufactured outside Australia; and (c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device. (3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2)(c) is taken to include a reference to a person who manufactures a device outside Australia. (4) A manufacturer that manufactures a device outside Australia and made a declaration of conformity in accordance with paragraph (2)(c) need not provide: (a) an ABN; or (b) an Australian Company Number (ACN); or (c) an Australian Registered Body Number (ARBN).
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Part does not apply in relation to a variant of a device if: (a) the relevant requirements of this Part have been met in relation to the device; and (b) the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
Before a supplier applies a compliance label consisting of the RCM to a device, the supplier must: (a) be registered on the national database; or (b) if the ACMA has not designated in writing a national database for the purposes of this Division—have been issued a supplier code number.
Note: Under section 187 of the Act, a supplier that fails to comply with requirements that must be met before a label has been applied to a device may be subject to a pecuniary penalty.
(1) To be registered on the national database a supplier must, using a method which the database indicates is a method for including information on the database, provide: (a) information identifying the supplier; (b) the supplier’s address in Australia; and (c) the name and contact details of a representative of the supplier. (2) For paragraph (1)(a), information identifying a supplier consists of the supplier’s ABN and 1 of the following pieces of information in relation to the supplier: (a) if the supplier is a body corporate, the name of the body corporate; (b) if the supplier is an individual, the name of the individual; (c) a business name used by the supplier in connection with its business as a supplier and registered as a business name under the Business Names Registration Act 2011. (3) If the information provided by a supplier for inclusion in the national database subsequently changes, the supplier must, within 30 days after the change occurs, update the national database with the changed information using a method which the database indicates is a method for updating information on the database. (4) In this section:
representative of the supplier means:
(a) an employee of the supplier;
(b) an officer of the supplier; or
(c) a person authorised in writing for the purposes of this section by the supplier or an employee or officer of the supplier.
officer of the supplier means:
(a) if the supplier is a corporation for the purposes of the Corporations Act 2001, an officer of a corporation as that term is defined in section 9 of the Corporations Act 2001; or
(b) if the supplier is an entity that is neither an individual nor a corporation for the purposes of the Corporations Act 2001, an officer of that entity as defined in section 9 of the Corporations Act 2001.
Note 1: The requirement for a supplier to update the information provided by it for inclusion in the national database imposed under subsection 10A(3) is an ongoing requirement. Under section 187A of the Act, a supplier that fails to comply with a specific requirement that must be met after a label has been applied to a device may be subject to a pecuniary penalty.
Note 2: Information provided by a supplier for inclusion on the national database for the purposes of this Notice will be made publicly available.
Before a supplier applies a compliance label consisting of the C‑Tick mark to a device, the supplier must have been issued a supplier code number by the ACMA.
(1) This section applies unless the ACMA has designated in writing a national database for the purposes of this Division. (2) A supplier may apply in writing to the ACMA for a supplier code number. (3) The application must be in a form approved by the ACMA.
Note: The ACMA makes approved forms available on its website.
(4) Upon such application being made, the ACMA may issue to the supplier a supplier code number.
(1) Before a supplier of a device applies a label to the device as a compliance label, the supplier must make a declaration of conformity for the device. (2) Subsection (1) is taken to be satisfied by an importer of a device, or an agent of the importer, who applies a label to the device as a compliance label without making a declaration of conformity for the device if: (a) the device complies with the applicable standard; and (b) the device was manufactured outside Australia; and (c) the manufacturer of the device made a declaration of conformity for the device before the label was applied to the device. (3) A reference to manufacturer in a declaration of conformity made in accordance with paragraph (2)(c) is taken to include a reference to a person who manufactures a device outside Australia. (4) A manufacturer that manufactures a device outside Australia and made a declaration of conformity in accordance with paragraph (2)(c) need not provide: (a) an ABN; or (b) an Australian Company Number (ACN); or (c) an Australian Registered Body Number (ARBN).
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device. (2) The compliance level for a device is: (a) for a category A device—compliance level 1; and (b) for a category B device for which the normal position of use is more than 20cm from the human body—compliance level 2; and (c) for a category B device for which the normal position of use is not more than 20cm from the human body—compliance level 3.
To comply with compliance level 1, the supplier of a device must: (a) prepare a description of the device; and (b) make a declaration of conformity for the device in accordance with section 11.
Note: Subsection 11(2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
To comply with compliance level 2, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessment under section 16.
To comply with compliance level 3, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessments under section 16 by an accredited testing body.
If a device is assessed for conformity with the applicable standard, the supplier of the device must obtain from the person that assessed the device a report addressing: (a) the measurements or evaluation methods that were used; and (b) the results of the measurements or evaluations, including any measurement or evaluation data; and (c) whether the results of the measurements or evaluations show that the device meets the applicable standard.
(1) This Part applies to a device if the supplier for the device has complied with the compliance level for the device under Part 2. (2) This Part also applies to a variant of the device.
(1) If a device is manufactured in Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the manufacturer; (b) an agent of the manufacturer; (c) a person who is authorised by the manufacturer, or an agent of the manufacturer, to apply labels on behalf of the manufacturer or agent.
Note: A compliance label is described in subsection 19(1).
(2) If a device is manufactured outside Australia, a label must be applied to the device as a compliance label by 1 of the following persons: (a) the importer; (b) an agent of the importer; (c) a person outside Australia who is authorised by the importer or agent to apply labels on behalf of the importer or agent.
(1) A compliance label for a device is a label that meets the requirements of this section and sections 19A to 19D. (2) The label must consist of either: (a) the RCM; or (b) if the label is applied before 1 March 2016—either of the compliance marks.
Location of compliance label
(3) Subject to sections 19C and 19D, the label must be placed on the device on a place that is accessible by the user.
Note: Section 19C deals with situations where applying a label to the surface of a device is not possible or practical. Section 19D gives a supplier the option of labelling some types of device electronically.
(4) A label is not accessible if it is necessary to use a specialised tool to gain access to it.
(1) A compliance label must be durable. (2) A compliance label must be applied to a device: (a) permanently; or (b) in a way that makes removal or obliteration difficult.
A compliance mark must be at least 3 mm high.
Note: This Notice does not prevent a supplier from applying its own additional supplier identification details onto a device.
(1) If it is not possible to apply a compliance label to the surface of a device because of the size or physical nature of the device, or it is not practical to apply a compliance label to the surface of a device, the compliance label must be applied to: (a) the external surface of the packaging used for the device; and (b) the documentation (including any warranty or guarantee certificates) that accompanies the device when it is supplied to the user. (2) The compliance label applied to the external surface of the packaging used for the device must: (a) occupy an area that is greater than 1% of that external surface; and (b) be clearly visible. (3) The supplier must make and keep a record of: (a) the reasons why subsection (1) applies to the device; and (b) where each compliance label is applied.
(1) A supplier may apply a compliance label to a device using the built‑in display of the device. (2) The supplier must ensure that the documentation that accompanies the device when it is supplied to the user sets out a method for displaying the compliance label. (3) The compliance label must be applied to the device in a way that would make it difficult to prevent the display of the label when the method set out in the documentation is used. (4) Subsection 19(3) and sections 19A and 19C do not apply to a label applied under this section.
A compliance record is a record that must be kept under section 21.
(1) If a supplier of a device applies a label to the device as a compliance label, the supplier must keep, for 5 years after the device has ceased to be supplied in Australia: (a) the declaration of conformity relating to the device; and (b) the description of the device; and (c) for a category B device—the records mentioned in section 22; and (d) for a device to which a compliance label is not applied because of section 19C—the records mentioned in subsection 19C(3). (2) If an agent of a manufacturer or importer keeps records for the manufacturer or importer that must be kept under subsection (1), the agent must also keep a copy of its agency agreement with the manufacturer or importer for the same period as those records are kept. (3) A compliance record: (a) must be in English; and (b) may be a copy of an original record; and (c) may be kept in electronic form.
For paragraph 21(1)(c), the records are: (a) the report issued under section 16 showing that the device meets the applicable standard; and (b) for a variant—a statement by the supplier that: (i) identifies the device and its variant; and (ii) describes the differences between the device and its variant; and (iii) provides a technical rationale for the conformity of the variant; and (iv) includes evidence that the electromagnetic radiation exposure in relation to the variant is not likely to exceed that of the device.
If a supplier of a device applies a label to the device as a compliance label, the supplier must ensure that the compliance records for the device are available at the principal business address in Australia of the supplier.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer, may in writing, require the supplier to give to the officer specified compliance records. (2) If the request is for a specified record, the supplier must produce the record within 10 working days after the day specified in the request. (3) If the request is for a specified circuit diagram or manual for the device, the supplier must produce the document within 30 working days after the day specified in the request. (4) After receiving the information from the supplier, the authorised officer must give the supplier a receipt for the information supplied. (5) The authorised officer: (a) may make copies of the records; and (b) must return the records given by the supplier as soon as practicable and, in any case, not more than 60 days after receiving the records. (6) If an authorised officer believes that the records kept by the supplier do not provide sufficient evidence that the device complies with the applicable standard, the officer may, in writing, require the supplier to give to the officer a test report from an accredited testing body showing that the device either complies or does not comply with the applicable standard.
(1) If a supplier of a device applies a label to the device as a compliance label, an authorised officer may, in writing, require the supplier of a device to give up to 3 samples of the device to a laboratory accredited by NATA and specified by the officer, for testing whether the device complies with an applicable standard. (2) The supplier must comply with the request within 10 working days after the day specified in the request. (3) The supplier must attempt to obtain from the laboratory a receipt that specifies the samples have been received and the date when they were received. (4) On receiving a request from the ACMA, the supplier must: (a) give the receipt to the ACMA; or (b) if the supplier is unable to obtain a receipt—satisfy the ACMA that the supplier made reasonable attempts to obtain a receipt. (5) The ACMA must make arrangements to ensure that the samples are returned to the supplier within a reasonable period after they have been tested. (6) If testing required under section 25 shows that the device does not comply with the standard, the supplier must meet the financial costs of the testing. (7) If testing required under section 25 shows that the device complies with the standard, the ACMA must meet the financial costs of the testing. (8) In this section:
device includes a variant of the device.
(1) Before a supplier applies a compliance label to a device, the supplier must comply with the compliance level for the device. (2) The compliance level for a device is: (a) for a category A device—compliance level 1; and (b) for a category B device for which the normal position of use is more than 20cm from the human body—compliance level 2; and (c) for a category B device for which the normal position of use is not more than 20cm from the human body—compliance level 3.
To comply with compliance level 1, the supplier of a device must: (a) prepare a description of the device; and (b) make a declaration of conformity for the device in accordance with section 11.
Note: Subsection 11(2) sets out the circumstances in which the requirement for a supplier of a device to make a declaration of conformity is taken to be satisfied by the overseas manufacturer of the device making the declaration.
To comply with compliance level 2, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessment under section 16.
To comply with compliance level 3, the supplier of a device must: (a) comply with compliance level 1; and (b) show conformity with the applicable standard by a report of the results of assessments under section 16 by an accredited testing body.
Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a device, means:
(a) the position specified in the measurement method applicable to the device in section 10, 11 or 12 of the applicable standard; or
(b) if paragraph (a) does not apply, the common use spatial orientation of the device with respect to the user; or
(c) if paragraphs (a) and (b) do not apply, the spatial orientation of the device with respect to the user defined by the manufacturer.
product identification code, for a device, means the written information used by the supplier of the device to identify the device.
RCM means the Regulatory Compliance Mark set out in Part 2 of Schedule 1.
Specific Absorption Rate, or SAR, means the rate at which RF energy is absorbed in body tissues, expressed as watts per kilogram (‘W/kg’).
supplier means:
(a) in relation to an imported device—the importer or agent of the importer; and
(b) in relation to a device manufactured in Australia—the manufacturer or the agent of the manufacturer.
supplier code number means a code number issued to a person:
(a) in accordance with a notice made by the ACMA under section 407 of the Telecommunications Act 1997; or
(b) in accordance with a notice made by the ACMA under section 182 of the Act; or
(c) by Standards Australia International Limited under AS/NZS 4417.
variant means a version of a device that is not identical to the device but is not sufficiently different from the device to affect the application to that version of a standard that applies to the device.
working day, in relation to a request, means a day other than:
(a) a Saturday or a Sunday; or
(b) a day that is a public holiday or an Australian Public Service holiday in the place where the request is made.
(2) Before 1 March 2005, an accredited testing body is a laboratory that is: (a) accredited by: (i) NATA; or (ii) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate; or (b) certified in accordance with International Standards Organisation ISO 9001:2000, as in force from time to time; or (c) accredited, in accordance with International Standards Organisation ISO 17025, as in force from time to time, to test the specific absorption rate. (3) On and after 1 March 2005, an accredited testing body is a laboratory that is accredited by: (a) NATA; or (b) an accreditation body of a foreign country, being a body with whom NATA has a mutual recognition arrangement or agreement; to conduct tests for specific absorption rate.
Note: On and from 1 March 2005, category B devices whose normal position of use is not more than 20cm from the human body must have tests for specific absorption rate conducted only by the bodies mentioned in subsection (3).
(4) A reference in this Notice to a document with the prefix ‘AS/NZS’ is a reference to a document that is a joint Australian and New Zealand Standard approved for publication on behalf of the Standards organisations of those countries, as in force from time to time. (5) Reference may be made in this Notice to an Australian and New Zealand Standard by number alone without inclusion of the edition or year of publication of the standard.
Note: Example
Note: AS/NZS 4417.1:1996 may be referred to as AS/NZS 4417.1.
(6) A term that is: (a) used (but not defined) in this Notice; and (b) defined in the Glossary of the ARPANSA standard; has the meaning given by the Glossary.
(1) A category A device is a device that meets the criteria in subsection (2) or (3). (2) The criteria in this subsection are that the device: (a) is an aware user device; and (b) is not required to be evaluated under section 5.2 of Schedule 5 to the ARPANSA Standard. (3) The criteria in this subsection are that the device: (a) is a non‑aware user device; and (b) is not required to be evaluated under section 5.3 of Schedule 5 to the ARPANSA standard.
(1) The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001, as in force immediately before 1 March 2003, continues to apply to a radiocommunications device to which the old standard applies under section 7 of the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003. (2) Subsection (1) ceases to apply at the end of 29 February 2004.
(1) This Notice applies to a device if: (a) the device is manufactured in Australia, or imported, for supply; and (b) the applicable standard applies to it. (2) This Notice does not apply to a device that is imported or manufactured otherwise than for supply in Australia. (3) This Notice does not apply to a category B device for which there is no applicable measurement method under the applicable standard.
If a device to which this Notice applies is also customer equipment or customer cabling to which the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, as in force from time to time, applies: (a) the requirements in this Notice are additional to the requirements under that Notice; and (b) Part 3 of this Notice does not apply in relation to the device; and (c) a reference in this Notice (except subsection 4(1)) to a compliance label includes a reference to a compliance label under that Notice.
If a device to which this Notice applies is also a device to which the Radiocommunications Devices (Compliance Labelling) Notice 2003, as in force from time to time, applies, the requirements in this Notice are additional to the requirements under that Notice.
Note: An effect of section 8A is that a compliance mark can only be applied to a device if it complies with the applicable requirements of this Notice and the Radiocommunications Devices (Compliance Labelling) Notice 2003.
This Notice is the Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2003.
This Notice commences on 1 March 2003.
The Radiocommunications (Compliance Labelling—Electromagnetic Radiation) Notice 2001 is revoked.
(1) In this Notice:
ABN has the same meaning as in the A New Tax System (Australian Business Number) Act 1999.
accredited testing body means a laboratory that is described in subsection (2) or (3).
Act means the Radiocommunications Act 1992.
agent, of a manufacturer or importer, means a person who is authorised in writing by the manufacturer or importer to act in Australia as an agent of the manufacturer or importer for Division 7 of Part 4.1 of the Act.
applicable standard means the Radiocommunications (Electromagnetic Radiation—Human Exposure) Standard 2003, as in force from time to time.
ARPANSA standard means the Radiation Protection Standard for Maximum Exposure Levels to Radiofrequency Fields—3 kHz to 300 GHz published by the Australian Radiation Protection and Nuclear Safety Agency and assigned the number ISBN 0‑0642‑79400‑6.
Note: The ARPANSA standard may be obtained from the Australian Radiation Protection and Nuclear Safety Agency website http://www.arpansa.gov.au .
AS/NZS 4417.1 means the Australian/New Zealand Standard Marking of electrical and electronic products to indicate compliance with regulations—Part 1: General rules for use of the mark published by Standards Australia.
authorised officer means:
(a) an inspector under subsection 267(1) of the Act; or
(b) a person authorised in writing by the ACMA for sections 24 and 25.
aware user device means a hand‑held or body‑worn radiocommunications transmitter that operates on a push‑to‑talk basis and is intended for use as:
(a) an ambulatory station; or
(b) a land mobile system station; or
(c) a maritime ship station; or
(d) a citizens band radio station; or
(e) an amateur station.
built‑in display, for a device, means an electronic display or screen integral to the device, and does not include a display or screen that can be used independently of the device.
category A device has the meaning given by section 5.
category B device means a device that is not a category A device.
compliance label has the meaning given by subsection 19(1).
Note: Section 8 extends some references to ‘compliance label’ in this Notice to include a compliance label under the Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001.
compliance mark means the C‑Tick mark or the RCM.
compliance record has the meaning given by section 20.
C‑Tick mark means the mark set out in Part 1 of Schedule 1.
declaration of conformity means a declaration that:
(a) is in a form approved by the ACMA; or
(b) contains the information required in that approved form, whether or not the declaration is accompanied by other material.
Note: The ACMA makes approved forms available on its website at www.acma.gov.au/complianceforms.
description of the device means sufficient information for a person to determine whether the device is the same as a device for which a declaration of conformity, test report or assessment against the applicable standard was prepared.
Note: The description of a device may include a photograph or sketch or other pictorial representation of the device illustrating its internal and external aspects (including printed circuit boards).
device means a mobile station to which the applicable standard applies.
human body means the head, neck and trunk but not the limbs.
mobile station means a transmitter that is established for use:
(a) in motion, on land, water or in the air; or
(b) in a stationary position at unspecified points on land, water or in the air.
Note: Examples of a mobile station
Note: 1 A wireless modem operating in a laptop computer.
Note: 2 A hand‑held cellular or PCS telephone with a radiating antenna in the handpiece.
NATA means the National Association of Testing Authorities, Australia (ACN 004 379 748).
national database means a database designated in writing by the ACMA for the purposes of Division 2.2.
Note: A database may be designated by the ACMA for the purposes of Division 2.2 even if it forms part of another database or also serves purposes other than purposes provided for in this Notice.
non‑aware user device means a device other than an aware user device.
normal position of use, of a d
This is an opening excerpt, not the complete document.