sch.2-sec-oc.7Signage (initial installation of building identification signs or a business identification signs)

sch.2-sec-oc.7 Signage (initial installation of building identification signs or a business identification signs)

Signage (initial installation of building identification signs or a business identification signs)

(1) Must not be constructed or installed on or in, or in relation to, a heritage item or a draft heritage item or on land in a heritage conservation area or draft heritage conservation area.

(2) Must not cover mechanical ventilation inlets or outlet vents.

(3) If the sign is a flush wall sign—

(a) must not be illuminated, and

(b) must not exceed maximum dimensions—300mm high and 450mm long, and

(c) maximum of 1 sign per site.

(4) If the sign is a fascia sign—

(a) must not be illuminated, and

(b) must not project above or below the fascia or return end of the awning, and

(c) must be flush with the fascia.

(5) If the sign is a top hamper sign—

(a) if illuminated—must have electrical conduits taken directly into the building, and

(b) must be flush to the external face of the shop front and must not project more than 150mm beyond the face of the building, and

(c) maximum of 1 sign per site, and

(d) must not extend below the head of the doorway or window to which it is attached, and

(e) must be setback 600mm from the side boundary.

(6) If the sign is an under awning sign—

(a) if illuminated—must have electrical conduits taken directly into the building, and

(b) must not project beyond the awning, and

(c) maximum of 1 sign per site, and

(d) must be erected horizontal to the ground and at right angles to the building, and

(e) must not exceed maximum dimensions—450mm high and 2400mm long, and