CTHIn ForceLegislation
Vehicle Standard (Australian Design Rule 93/00 – Forward Field of View) 2018
Table ITable I
Start here
Get a plain-English read of Table I
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 93/00 – Forward Field of View) 2018.
Table I
| V-point | X | Y | Z |
|---|---|---|---|
| V1 | 68 mm | -5 mm | 665 mm |
| V2 | 68 mm | -5 mm | 589 mm |
5.3. Position of the P points
5.3.1. The position of the P points in relation to the "R" point, as indicated by the XYZ coordinates from the three-dimensional reference grid, are as shown by Tables II, III and IV.
5.3.1.1. Table II sets out the base coordinates for a design seat-back angle of 25°. The positive direction of the coordinates is set out in Annex 4, Appendix, Figure 1.
The Pm point is the point of intersection between the straight line joining P1, P2 and the longitudinal vertical plane passing through the "R" point.