Vehicle Standard (Australian Design Rule 80/00 – Emission Control for Heavy Vehicles) 2005
4REQUIREMENTS
Start here
Get a plain-English read of 4
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 80/00 – Emission Control for Heavy Vehicles) 2005.
4 REQUIREMENTS
4.1 Engines which operate on diesel, and which comply with the technical requirements of Appendix A, as per the limit values in row A of Table 1, and, if applicable, row A of Table 2, in section 6.2.1 of Annex I of Appendix A, will be accepted as complying with this vehicle standard.
4.2 Engines which operate on liquefied petroleum gas or natural gas, and which comply with the technical requirements of Appendix A, as per the limit values in row A of Table 2 in section 6.2.1 of Annex I of Appendix A, will be accepted as complying with this vehicle standard.
4.3 Engines which operate on petrol, and which comply with the technical requirements of the USA Code of Federal Regulations, Part 86 – Control of air pollution from new and in-use motor vehicles and new and in-use motor vehicle engines certification and test procedures - Subpart A 40 CFR 86.096-10 Emission standards for 1996 and later model year Otto-cycle heavy-duty engines and vehicles; and Sub Part N 40 CFR 86.1300 series – Emission Regulations for new Otto-cycle and diesel heavy duty engines; gaseous and particulate exhaust test procedures, will be accepted as complying with this vehicle standard.