Vehicle Standard (Australian Design Rule 13/00 – Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles) 2005
Part 5– Example of illuminating surface in comparison with light-emitting surface in the case of a "single function lamp" (see paragraphs 2.8. to 2.9. of this Regulation)
Start here
Get a plain-English read of Part 5
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 13/00 – Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles) 2005.
Part 5 – Example of illuminating surface in comparison with light-emitting surface in the case of a "single function lamp" (see paragraphs 2.8. to 2.9. of this Regulation)
Examples of a light source with a reflector optic behind an outer lens:
Example 1 Example 2
Sketches show the example 1 and 2 of a light a source with a reflector optic behind an outer lens.
Examples of a light source with a reflector optic with a inner lens behind an outer lens:
Example 3 Example 4
Sketches show the example 3 and 4 of a light a source with reflector optic with a inner lens behind an outer lens.
Examples of a light source with a reflector optic with a partial inner lens behind an outer lens:
Example 5 Example 6
Sketches show the example 5 and 6 of a light a source with reflector optic with a partial inner lens behind an outer lens.
Example of a light guide optic behind an outer lens:
Example 7
Figure shows an example of a light guide optic behind an outer lens
Example of a light guide optic or a reflector optic behind an outer lens:
Example 8
Example 8 Figure shows an example of a light guide optic or a reflector optic behind an outer lens.
Example of a light source with a reflector optic in combination with an area, which is not part of this function, behind an outer lens:
Example 9
Figure shows an example of a light source with a reflector optic in combination with an area, which is not part of this function, behind an outer lens