Section 1 - Tariff Concession Revocation Order HS2007/578A - Tariff Concession Order 0614566 - Tariff Concession Revocation Order HS2007/578A - Tariff Concession Order 0614566

TARIFF CONCESSION REVOCATION ORDERUnder Section 269SD(2) of the Customs Act 1901, I Robert Crawford a delegate of the Chief Executive Officer(a) revoke Tariff Concession Order Number 9708969 made on 05.01.98, in respect of the goods described in TABLE A below. This Revocation has effect from 01.01.07; and(b) make in its place the Tariff Concession Orders described in TABLE B. The goods specified in Column 1 of TABLE B are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of TABLE B applies. The Order shall have effect from the date notified in paragraph (a) above as the date of effect for the Revocation.

TABLE A

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item Number Last date of effect

8708.99.99	PARTS, SUSPENSION, COMMERCIAL MOTOR VEHICLE, being ANY of thefollowing:(a) spring hangers or frame shockhangers having:(i) a minimum yield strength of 380 mPa;(ii) a minimum tensile strength of 550 mPa;(iii) a minimum elongation of 6%;(iv) a general hardness range of 187-255 BHN;(v) attachment load capacity NOT exceeding 60 kN;(b) torque rods or transverse rods having:(i) 3 axis with end joint connections of either taper pinor bar pin;(ii) an attachment tensile and compressive load capacityNOT exceeding 35 kN;(c) top pads or transverse rod frame brackets having:(i) minimum yield strength of 300 mPa;(ii) minimum tensile strength of 450 mPa;(iii) minimum elongation of 12%;(iv) a general hardness range of 156-217 BHN;(d) spring seats or axle bottom caps having:(i) minimum yield strength of 380 mPa;(ii) minimum tensile strength of 550 mPa;(iii) minimum elongation of 6%;(iv) general hardness range of 187-255 BHN;(v) attachment load capacity NOT exceeding 35 kN;(e) transverse rod axle brackets having:(i) minimum yield strength of 300 mPa;(ii) minimum tensile strength of 550 mPa;(iii) minimum elongation of 20%;(iv) a general hardness range of 156-196 BHN;(f) cross channels or lower shock brackets having:(i) minimum tensile strength of 448 mPa;(ii) minimum yield strength of 350 mPaOp. 10.10.97 - TC 9708969	5031.12.06

This is page 1 of 2 Pages of the instrument...Robert Crawford......................Dated 20 June 2007 Delegate of the Chief Executive Officer

Revocation Instrument HS2007/578A

TABLE B

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item Number Last date of effect

8708.80.99	PARTS, SUSPENSION, COMMERCIAL MOTOR VEHICLE, being ANY of thefollowing:(a) spring hangers or frame shockhangers having:(i) a minimum yield strength of 380 mPa;(ii) a minimum tensile strength of 550 mPa;(iii) a minimum elongation of 6%;(iv) a general hardness range of 187-255 BHN;(v) attachment load capacity NOT exceeding 60 kN;(b) torque rods or transverse rods having:(i) 3 axis with end joint connections of either taper pinor bar pin;(ii) an attachment tensile and compressive load capacityNOT exceeding 35 kN;(c) top pads or transverse rod frame brackets having:(i) minimum yield strength of 300 mPa;(ii) minimum tensile strength of 450 mPa;(iii) minimum elongation of 12%;(iv) a general hardness range of 156-217 BHN;(d) spring seats or axle bottom caps having:(i) minimum yield strength of 380 mPa;(ii) minimum tensile strength of 550 mPa;(iii) minimum elongation of 6%;(iv) general hardness range of 187-255 BHN;(v) attachment load capacity NOT exceeding 35 kN;(e) transverse rod axle brackets having:(i) minimum yield strength of 300 mPa;(ii) minimum tensile strength of 550 mPa;(iii) minimum elongation of 20%;(iv) a general hardness range of 156-196 BHN;(f) cross channels or lower shock brackets having:(i) minimum tensile strength of 448 mPa;(ii) minimum yield strength of 350 mPaOp. 01.01.07 - TC 0614566	50

This is page 2 of 2 Pages of the instrument...Robert Crawford......................Dated 20 June 2007 Delegate of the Chief Executive Officer

Revocation Instrument HS2007/578A

1

Get a plain-English read of 1