Commonwealth legislation

Tariff Concession Order 0922202

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Order declares that a narrowly described grade and sizes of hot-dip zinc‑coated steel (Customs classification 7212.30.00) are goods to which an item in Part III of Schedule 4 to the Customs Tariff Act 1995 applies. It takes effect from 29.06.09 and continues until revoked under sections 269SC or 269SD or a date shown in the table.

Suppliers and importers must meet JIS G 3302:2007 and the Order’s numeric strength, elongation, coating and dimension tolerances; the decision was made under s269P by a delegate of the CEO (Wendy Knowles, signed 18 Sep 2009).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Tariff Concession Order 0922202.

Tariff Concession Order 0922202

TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 29.06.09 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2.

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

7212.30.00	STEEL, hot dip zinc coated, complying with Japanese IndustrialStandard JIS G 3302:2007, having ALL of the following:(a) yield strength NOT less than 115 N/mm2 and NOT greater than225 N/mm2;(b) tensile strength NOT less than 270 N/mm2;(c) elongation NOT less than 39% and NOT greater than 53%;(d) coating mass NOT less than 45 g/m2 and NOT greater than 65g/m2;(e) EITHER of the following sizes:(i) thickness 0.70 mm and width 540 mm;(ii) thickness 0.90 mm and width 570 mmFor the purposes of this Order, tolerances allowable forspecification (e) are + or - 5%Op. 29.06.09 - TC 0922202	5029.08.09

This is page 1 of 1 Page of the above Table.....................Wendy Knowles ...................Dated 18 September 2009 Delegate of the Chief Executive Officer

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 Tariff Concession Order 0922202

THE TABLE

COLUMN 1Description of Goods including theCustoms Tariff Classification	COLUMN 2Schedule 4 Item NumberLast date of effect

7212.30.00	STEEL, hot dip zinc coated, complying with Japanese IndustrialStandard JIS G 3302:2007, having ALL of the following:(a) yield strength NOT less than 115 N/mm2 and NOT greater than225 N/mm2;(b) tensile strength NOT less than 270 N/mm2;(c) elongation NOT less than 39% and NOT greater than 53%;(d) coating mass NOT less than 45 g/m2 and NOT greater than 65g/m2;(e) EITHER of the following sizes:(i) thickness 0.70 mm and width 540 mm;(ii) thickness 0.90 mm and width 570 mmFor the purposes of this Order, tolerances allowable forspecification (e) are + or - 5%Op. 29.06.09 - TC 0922202	5029.08.09

This is page 1 of 1 Page of the above Table.....................Wendy Knowles ...................Dated 18 September 2009 Delegate of the Chief Executive Officer