{"id":"F2010L00320","name":"Tariff Concession Order 0922202","slug":"tariff-concession-order-0922202","collection":"legislative_instrument","jurisdiction":"commonwealth","status":"in_force","isInForce":true,"actNumber":null,"makingDate":null,"administeringDepartment":null,"currentVersion":{"id":123203,"registerId":"commonwealth-F2010L00320-current","compilationNumber":null,"startDate":"2026-04-03","status":"InForce","reasons":null,"registeredAt":null},"sections":[{"sectionNumber":"1","sectionType":"section","heading":"Tariff Concession Order 0922202","content":"| TARIFF CONCESSION ORDERUnder Section 269P of the Customs Act 1901, I, Wendy Knowles, a delegate of the Chief Executive Officer declare that the goods specified in Column 1 of THE TABLE are goods to which the item in Part III of Schedule 4 to the Customs Tariff Act 1995 specified in Column 2 of THE TABLE applies. This Order shall have effect from 29.06.09 and continue in force until revoked under sections 269SC or 269SD of the Act, or the date, if any, specified in Column 2. |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |\n\nTHE TABLE\n\n| COLUMN 1Description of Goods including theCustoms Tariff Classification | COLUMN 2Schedule 4 Item NumberLast date of effect |\n| ----------------------------------------------------------------------- | ------------------------------------------------- |\n\n| 7212.30.00 | STEEL, hot dip zinc coated, complying with Japanese IndustrialStandard JIS G 3302:2007, having ALL of the following:(a) yield strength NOT less than 115 N/mm2 and NOT greater than225 N/mm2;(b) tensile strength NOT less than 270 N/mm2;(c) elongation NOT less than 39% and NOT greater than 53%;(d) coating mass NOT less than 45 g/m2 and NOT greater than 65g/m2;(e) EITHER of the following sizes:(i) thickness 0.70 mm and width 540 mm;(ii) thickness 0.90 mm and width 570 mmFor the purposes of this Order, tolerances allowable forspecification (e) are + or - 5%Op. 29.06.09 - TC 0922202 | 5029.08.09 |\n| ---------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------- |\n\n| This is page 1 of 1 Page of the above Table.....................Wendy Knowles ...................Dated 18 September 2009 Delegate of the Chief Executive Officer |\n| ---------------------------------------------------------------------------------------------------------------------------------------------------------------- |","sortOrder":0}],"analysis":{"kimi_summary":{"content_quality":"ok","complexity_score":3,"scope_assessment":{"changed":false,"description":"This is a standard, narrow Tariff Concession Order of the kind routinely issued under the Customs Act 1901. It applies to one specific tariff classification (7212.30.00) for a single, highly specified product. There is no indication of scope creep; it serves exactly the purpose intended by the tariff concession system — granting duty relief for specific imported goods that meet precise criteria."},"complexity_factors":["Single product category with highly specific technical specifications (5 distinct criteria including yield strength, tensile strength, elongation, coating mass, and exact dimensions)","References to external technical standard (Japanese Industrial Standard JIS G 3302:2007) which is not defined within the instrument","Nested conditional logic: 'ALL of the following' requirements plus an 'EITHER' alternative for sizing","Cross-references to Customs Act 1901 (sections 269P, 269SC, 269SD) and Customs Tariff Act 1995 (Schedule 4, Part III)","Tolerance specification (+/- 5%) adds a mathematical condition to the dimensional requirements","Short length (1 page) and single table entry keeps complexity relatively low despite technical density"],"plain_english_summary":"This Tariff Concession Order (0922202) grants reduced or zero customs duty for a narrowly defined hot‑dip zinc‑coated steel complying with JIS G 3302:2007 and precise size and mechanical specs. \n\nIt matters to importers of that specific steel, Australian manufacturers and users who buy it, and competing local steel producers—by lowering import costs it makes these imported inputs cheaper and alters competitive dynamics. Effective 29 June 2009."},"flash_summary_failed":{"failed":true,"reason":"Unauthenticated. Configure AI_GATEWAY_API_KEY or use a provider module. Learn more: https://ai-sdk.dev/unauthenticated-ai-gateway","source":"analysis-cron"},"flash_summary":{"complexity_score":3,"scope_assessment":{"changed":false,"description":"The Order, as drafted, establishes the scope by listing a specific steel product and its required standards and tolerances, with an effective date of 29.06.09 and revocation governed by ss269SC/269SD. The text does not indicate any alteration of a prior scope or any amendment to a previous instrument; it sets scope rather than changing it."},"complexity_factors":["Technical product specification with multiple numeric ranges (yield strength 115–225 N/mm2, tensile ≥270 N/mm2, elongation 39–53%, coating mass 45–65 g/m2) increases compliance precision.","Precise dimensional options with +/-5% tolerances (thickness/width combinations) require measurement and verification.","Reference to an external standard (Japanese Industrial Standard JIS G 3302:2007) imposes reliance on non‑legislative technical material.","Legal cross‑references to multiple Acts and sections (s269P, s269SC, s269SD; Customs Act 1901; Customs Tariff Act 1995) create administrative steps for effect and revocation.","Tariff classification (7212.30.00) ties the product description to customs duty application and administrative processing.","Formatting/typography in the table (Column 2 date/entry ambiguous) could create interpretive uncertainty for effect/expiry."],"plain_english_summary":"This Order declares that a narrowly described grade and sizes of hot-dip zinc‑coated steel (Customs classification 7212.30.00) are goods to which an item in Part III of Schedule 4 to the Customs Tariff Act 1995 applies. It takes effect from 29.06.09 and continues until revoked under sections 269SC or 269SD or a date shown in the table.\n\nSuppliers and importers must meet JIS G 3302:2007 and the Order’s numeric strength, elongation, coating and dimension tolerances; the decision was made under s269P by a delegate of the CEO (Wendy Knowles, signed 18 Sep 2009)."}},"importantCases":[],"_links":{"self":"/api/acts/tariff-concession-order-0922202","history":"/api/acts/tariff-concession-order-0922202/history","analysis":"/api/acts/tariff-concession-order-0922202/analysis","conflicts":"/api/acts/tariff-concession-order-0922202/conflicts","importantCases":"/api/acts/tariff-concession-order-0922202/important-cases","documents":"/api/acts/tariff-concession-order-0922202/documents"}}