262Proceeding when bicycle crossing at an intersection or

262 Proceeding when bicycle crossing at an intersection or another place on a road (1) The rider of a bicycle who is crossing at an intersection, or another place on a road, with pedestrian crossing lights or bicycle crossing lights (crossing lights) and traffic lights must comply with this (2) If the crossing lights change from green to yellow, flashing yellow, red or flashing red while the rider is crossing the road, the rider must not stay on the road for longer than necessary to cross safely to the nearer (in the direction of travel of the rider) of the following: area set aside or used by riders of bicycles to cross the road at the intersection or place (the safety area); (b) the far side of the road.

(2A) Despite subsection (2), in the circumstances set out in that subsection the rider may instead return to the side of the road, or to the safety area, that the rider has just left, but only if— (a) at the time the lights change, that side or safety area is closer to the rider than the side or safety area (whichever is the closer) that the rider was heading for at that time; and (b) the rider does not stay on the road for longer than is necessary to return to that side or safety area. (3) If, under subsection (2), the rider crosses to the safety area, the rider must remain in the safety area until the crossing lights change to green. (4) However, if the rider cannot operate the crossing lights from the safety area, the rider may cross to the far side of the road when— (a) the traffic lights change to green or flashing yellow, or there is no red traffic light showing; and (b) it is safe to do so. (4A) If the bicycle crossing lights show a green bicycle crossing light, the rider may cross at the intersection, or another place on the road, even though the traffic lights show a red or yellow traffic light.