Petroleum and Gas (General Provisions) Regulation 2017
sec.59Other requirements for accuracy of meter—100TJ to 1PJ
Start here
Get a plain-English read of sec.59
Turn the raw legal text into a practical explanation grounded in Petroleum and Gas (General Provisions) Regulation 2017.
sec.59 Other requirements for accuracy of meter—100TJ to 1PJ
This section applies in relation to a meter that measures 100TJ or more, but not more than 1PJ, a year. The controller of the meter must ensure the meter is installed with a device to correct the meter’s readings to standard temperature and pressure. The overall tolerance for error for the meter, including the correcting device, is plus or minus 1%. The accuracy of the meter must be checked at least once in each 6-month period. s 59 amd 2024 SL No. 32 s 5 (sec.59-ssec.1) This section applies in relation to a meter that measures 100TJ or more, but not more than 1PJ, a year. (sec.59-ssec.2) The controller of the meter must ensure the meter is installed with a device to correct the meter’s readings to standard temperature and pressure. (sec.59-ssec.3) The overall tolerance for error for the meter, including the correcting device, is plus or minus 1%. (sec.59-ssec.4) The accuracy of the meter must be checked at least once in each 6-month period.