Heavy Vehicle (Vehicle Standards) National Regulation
sch.2-sec.30White or silver band on particular vehicles
Start here
Get a plain-English read of sch.2-sec.30
Turn the raw legal text into a practical explanation grounded in Heavy Vehicle (Vehicle Standards) National Regulation.
sch.2-sec.30 White or silver band on particular vehicles
This section applies to a heavy vehicle, other than a vehicle built after 20 February 2016 that complies with ADR 42/04 or a later version of ADR 42, that— is at least 2.2m wide; and has a body with a vertical measurement less than 300mm at the rear, measured from the lowest point of the body above ground level to the highest point; and is not fitted with rear marking plates or conspicuity markings in accordance with section 80 . The heavy vehicle must have a white or silver band at least 75mm high across the full width of the rearmost part of the vehicle’s body. sch 2 s 30 amd 2018 SL No. 89 s 35 ; 2019 SL No. 238 s 12 (sch.2-sec.30-ssec.1) This section applies to a heavy vehicle, other than a vehicle built after 20 February 2016 that complies with ADR 42/04 or a later version of ADR 42, that— is at least 2.2m wide; and has a body with a vertical measurement less than 300mm at the rear, measured from the lowest point of the body above ground level to the highest point; and is not fitted with rear marking plates or conspicuity markings in accordance with section 80 . (sch.2-sec.30-ssec.2) The heavy vehicle must have a white or silver band at least 75mm high across the full width of the rearmost part of the vehicle’s body.
- (a) is at least 2.2m wide; and
- (b) has a body with a vertical measurement less than 300mm at the rear, measured from the lowest point of the body above ground level to the highest point; and
- (c) is not fitted with rear marking plates or conspicuity markings in accordance with section 80 .