Greenhouse and Energy Minimum Standards (LED Lamps) Determination 2025
24Testing in reference control settings
Start here
Get a plain-English read of 24
Turn the raw legal text into a practical explanation grounded in Greenhouse and Energy Minimum Standards (LED Lamps) Determination 2025.
24 Testing in reference control settings
(1) Subject to subsection (2), if an LED lamp is tested in its reference control settings to determine whether it complies with the requirements of this instrument, that testing must be conducted:
(a) if it is possible to switch off or disconnect the lighting control parts or non-lighting parts of the lamp—with those parts switched off or disconnected; or
(b) otherwise—with the parts mentioned in paragraph (a) operated at minimal power.
Note: A number of requirements for products in this instrument relate to values of characteristics of those products measured in the reference control settings.
(2) Subsection (1) does not apply if the lamp is not able to obtain full-load conditions with the parts mentioned in that subsection switched off, disconnected or operated at minimal power (as relevant).