10Classes of products that are covered by this instrument

10 Classes of products that are covered by this instrument

Classes of products covered by this instrument

(1) This instrument covers LED lamps that:

(a) satisfy the general conditions in subsection (4); and

(b) are of a type covered by:

(i) subsection (5) (single-capped lamps); or
(ii) subsection (6) (double-capped lamps).

(2) The following are separate product classes:

(a) LED lamps that satisfy subsection (4) and are covered by subsection (5);

(b) LED lamps that satisfy subsection (4) and are covered by subsection (6).

Instrument covers LED lamps regardless of whether they are in a containing product

(3) This instrument covers LED lamps that fall within subsection (1), whether or not they are placed on the market in a containing product.

General conditions

(4) The general conditions for an LED lamp are the following:

(a) it has chromaticity coordinates x and y in the range:

A formula showing the allowed range of the x chromaticity coordinate for LED lamps to be within scope of the determination. The acceptance range for x is from 0.270 to 0.530.

and

A quadratic based formula showing the allowed range of the y chromaticity coordinate for LED lamps to be within scope of the determination.

(b) it has an initial luminous flux of < 500 lumen per mm2 of projected light-emitting surface area;

(c) it has an initial luminous flux between 100 and 82,000 lumens;

(d) it contains one or more inorganic LEDs.

Single-capped LED lamps

(5) This subsection covers lamps with LED light sources of all shapes with a single cap of one of the following types:

(a) BA15d, B15d, B22d, E11, E12, E13, E14, E17, E26, E27, E39, E40, GU10, GZ10, GX10, GU24, GX53, G9;

(b) Bi-pin lamp caps G4, GU4, GY4, GZ4, GU5.3, GX5.3, G6.35, GY6.35, GU7, G53.

Double-capped LED lamps

(6) This subsection covers double-capped LED lamps with a nominal length of 550 mm to 1500 mm, including:

(a) double-capped LED retrofit lamps and double-capped conversion LED lamps (as defined in clauses 3.1 and 3.2 of IEC 62776) with G5 and G13 caps, intended for replacing fluorescent lamps with the same caps; and

(b) double-capped LED lamps (as defined in IEC 62931) with GX16t-5 caps.

(7) In this section:

containing product, in relation to an LED lamp, means a different and larger product within which the lamp is supplied.