sch.2-secAdvertising structures

sch.2-sec Advertising structures

Advertising structures

(1) Must not cover mechanical ventilation inlet or outlet vents.

(2) Advertising panels (building identification signs or business identification signs) must comply with the following—

(a) maximum area—1m2,

(b) only 1 per property,

(c) must be secure and stable.

(3) An A-frame sign on private land used in conjunction with an existing premises for which consent has been granted on land that is in Zone E1 or MU1, must comply with the following—

(a) only 1 per property,

(b) must not involve any live or recorded entertainment including music, broadcast programs, flashing lights or the like,

(c) area must immediately adjoin the premises and not obstruct access to the premises or to any adjacent premises,

(d) maximum display area (on each side)—500mm2,

(e) must be secure and stable,

(f) must not involve construction work,

(g) must be temporary and must be removed at the close of business.

(4) Fascia sign must comply with the following—

(a) must be attached to an existing fascia and fixed flush with the fascia,

(b) must not extend above or below the fascia or return end of the awning,

(c) must not be illuminated,

(d) only 1 per property.

(5) Flush wall sign must comply with the following—

(a) maximum area—1m2,

(b) must be securely fixed to an existing wall,

(c) maximum height—2.5m above ground level (existing),

(d) must not be illuminated,

(e) only 1 per property in Zone RU5 Village,

(f) maximum of 2 per property in all other zones,