25Certificate content—Act, par 50(1)(l)

25  Certificate content—Act, par 50(1)(l)

 (1) A PGO certificate created by the holder of a production profile for a product in respect of a batch of the product must state the following:

 (a) details of the facility, including:

 (i) the name of the facility; and

 (ii) the location of the facility;

 (b) a unique identification code for the batch;

 (c) the production emissions intensity for the batch;

 (d) if the co-product reduction in emissions intensity for the batch is greater than zero:

 (i) the co-product; and

 (ii) the co-product reduction in emissions intensity;

 (e) if the production pathway uses electricity:

 (i) the total amount of electricity used to produce the batch, calculated in accordance with subsection (2); and

 (ii) the renewable electricity percentage of the batch calculated in accordance with subsection (3);

 (f) if the production pathway uses electricity generated from an eligible renewable energy source—whether the electricity is from the same electricity network to which the facility is connected;

 (g) if a product-specific attribute specified in Schedule 2 applies to the batch—that attribute.

 (2) For subparagraph (1)(e)(i), the total amount of electricity in kilowatt hours used to produce the batch, TEb is calculated as follows:

A formula for calculating the total electricity usage for the batch ‘b’. The formula is a sum of three terms: RE subscript local b, Q subscript elec market b, and Q subscript elec hol b.

RElocal,b is the quantity of electricity used to produce the batch b, in kilowatt hours, that is generated by the holder of the production profile from an eligible renewable energy source.

Qelec,market,b has the same meaning as in section 15 (Electricity supply and use) of the Future Made in Australia (Guarantee of Origin) Methodology Determination 2025.

Qelec,hol,b is the quantity of electricity used to produce the batch b, in kilowatt hours, that is generated by the holder of the production profile from a source other than an eligible renewable energy source.

 (3) For subparagraph (1)(e)(ii), the renewable electricity percentage of the batch, REPb, is calculated as follows:

A formula for calculating the renewable electricity percentage for the batch ‘b’. The formula is a fraction multiplied by one hundred percent. The numerator of the fraction is given as RE subscript local b, plus (open brackets) Q subscript elec market b, minus Q subscript eligible b (close brackets), plus Q subscript rec b. The denominator is given as TE subscript b.