2Loxin anchor-type high-tensile bolts with a diameter of 52mm

2 Loxin anchor-type high-tensile bolts with a diameter of 52mm x 16mm and a 10mm thread; (b) if mounted on concrete or stone—the safe must be attached by at least 2 Dyna-type bolts and expanding anchors with a diameter of 70mm x 12mm and a 10mm thread that are internally fitted through holes in the rear or bottom of the container that conform with the manufacturer’s specifications; (c) if mounted on wall studs or floor joists— (i) it must be attached flush against the timber or plaster surfaces by 2 steel hexagonal-head coach screws that are not less than 8mm in diameter x 50mm in length and are internally fitted through holes in the rear or bottom of the container that conform with the manufacturer’s specifications; and

(ii) the container, timber floor or plaster wall surfaces must be recessed so there is no airspace between the surfaces and the container, with the rear bottom edge of the container being recessed into skirting board. (5) A locking mechanism mentioned in subsection (3) (e) must be securely fixed to the rear face of the door of the container by retaining screws and a metal strap overlapping, or enclosing, the locking case with each end welded to the rear door face.