NSWIn ForceRegulation
Electricity Supply (Safety and Network Management) Regulation 2014
10Network operators to measure and report on performance
Start here
Get a plain-English read of 10
Turn the raw legal text into a practical explanation grounded in Electricity Supply (Safety and Network Management) Regulation 2014.
#### 10 Network operators to measure and report on performance
10 Network operators to measure and report on performance
> > (1) A network operator must measure its performance against its safety management system.
>
> > (2) A network operator must—
> >
> > > (a) publish the results of its performance measurements annually, and
> >
> > > (b) ensure that copies of those results—
> > >
> > > > (i) are kept at its principal office, and
> > >
> > > > (ii) are made available for inspection on the website (if any) of the network operator, and
> > >
> > > > (iii) are made available in such a way that, as far as practicable, the results are brought to the notice of its customers and the public.
> >
> > Maximum penalty—250 penalty units (in the case of a corporation) or 100 penalty units (in any other case).
>
> > (3) A network operator must, before publishing the results of its performance measurements, give the Tribunal written notice of its intention to publish those results and of the date from which it proposes to make those performance measurements available under subclause (2) (b).
> >
> > Maximum penalty—100 penalty units (in the case of a corporation) or 25 penalty units (in any other case).
>
> > (4) The Tribunal may exempt a network operator from subclauses (2) and (3) if satisfied that compliance with the requirements of those subclauses would not be in the public interest in the circumstances of the case.
>
> **cl 10:** Am 2015 No 5, Sch 8.9 \[6\].