5Form and content of regulated designs involving performance solutions

#### 5 Form and content of regulated designs involving performance solutions 5 Form and content of regulated designs involving performance solutions > > (1) For the purposes of section 5(2) of the Act, a regulated design that is prepared for a performance solution for building work, including a building element, must be in the form of a report that includes the following— > > > > > (a) relevant plans that show, or specifications that describe, the physical elements of the performance solution, if any, > > > > > (b) a description and justification of the performance solution, including— > > > > > > > (i) the acceptance criteria and parameters on which the justification is based, and > > > > > > > (ii) a description of the physical elements of the performance solution, and > > > > > > > (iii) restrictions or conditions of the performance solution, and > > > > > > > (iv) a copy of the brief on which the justification of the performance solution is based, > > > > > (c) a statement that the performance solution complies with the relevant performance requirements of the Building Code of Australia, > > > > > (d) information that identifies the deemed-to-satisfy provisions of the Building Code of Australia being varied, where relevant. > > > (2) A report for a regulated design that is prepared for a performance solution must comply with the applicable evidence requirements for the design specified in the Building Code of Australia, Volume 1, A2G2. > > > (3) In this clause— > > > > deemed-to-satisfy provisions has the same meaning as in the Building Code of Australia. > > **cl 5:** Am 2023 (71), Sch 1.2\[1\].