Defence and Strategic Goods List 2021

Part 1A—Preliminary

Division 1—Preliminary

1.1 Name

1.2 Commencement

1.3 Authority

1.4 Schedules

Division 2—Simplified outline of the Defence and Strategic Goods List

Division 3—Interpretation

3.1 Definitions

3.2 Notes

3.3 Incorporated goods

3.4 New and used goods

3.5 CAS numbers

3.6 Source code

3.7 Medical equipment

3.8 Nuclear technology note (NTN)

3.9 General technology note (GTN)

3.10 General software note (GSN)

3.11 General “information security” note (GISN)

Division 4—Definitions

Division 5—Acronyms and abbreviations

Part 1—Munitions list

Part 2—Dual‑use list

Category 0—Nuclear materials, facilities and equipment

Category 1—Materials, chemicals, microorganisms and toxins

Category 2—Materials processing

Category 3—Electronics

Category 4—Computers

Category 5—Telecommunications and “information security”

Category 6—Sensors and lasers

Category 7—Navigation and avionics

Category 8—Marine

Category 9—Aerospace and propulsion

Sensitive list of dual‑use goods and technologies

Very sensitive list of dual‑use goods and technologies

Schedule 1—Repeals

Defence and Strategic Goods List 2019

Part 1A—Preliminary

Division 1—Preliminary

1.1  Name

  This instrument is the Defence and Strategic Goods List 2021.

1.2  Commencement

 (1) Each provision of this instrument specified in column 1 of the table commences, or is taken to have commenced, in accordance with column 2 of the table. Any other statement in column 2 has effect according to its terms.

• Commencement information
• Column 1 Column 2 Column 3
• Provisions Commencement Date/Details
• 1. The whole of this instrument The day after this instrument is registered. 28 August 2021

Note: This table relates only to the provisions of this instrument as originally made. It will not be amended to deal with any later amendments of this instrument.

 (2) Any information in column 3 of the table is not part of this instrument. Information may be inserted in this column, or information in it may be edited, in any published version of this instrument.

1.3  Authority

  This instrument is made under paragraph 112(2A)(aa) of the Customs Act 1901.

1.4  Schedules

  Each instrument that is specified in a Schedule to this instrument is amended or repealed as set out in the applicable items in the Schedule concerned, and any other item in a Schedule to this instrument has effect according to its terms.

Division 2—Simplified outline of the Defence and Strategic Goods List

The Defence and Strategic Goods List is divided into 2 Parts.

Part 1 of the List covers defence and related goods, that is goods and technologies designed or adapted for use by armed forces or goods that are inherently lethal. These goods include:

 military goods, being goods or technology that is designed or adapted for military purposes, including their parts and accessories; and

 non‑military lethal goods, being equipment that is inherently lethal, incapacitating or destructive, such as non‑military firearms, non‑military ammunition and commercial explosives and initiators.

Part 2 of the List covers those goods that have a dual use. Dual‑use goods comprise equipment and technologies developed to meet commercial needs but which may be used either as military components, or for the development or production of military systems or weapons of mass destruction. This Part is made up of the following 10 categories:

 Category 0 — Nuclear Materials;

 Category 1 — Materials, Chemicals, Microorganisms and Toxins;

 Category 2 — Materials Processing;

 Category 3 — Electronics;

 Category 4 — Computers;

 Category 5 — Telecommunications and Information Security;

 Category 6 — Sensors and Lasers;

 Category 7 — Navigation and Avionics;

 Category 8 — Marine;

 Category 9 — Aerospace and Propulsion.

The List is amended from time to time to reflect changes in the various multilateral non‑proliferation and export control regimes of which Australia is a member.

Division 3—Interpretation

3.1 Definitions

  Terms in “quotation marks” are defined terms (see Division 4—Definitions). Words and terms that are defined and that appear in the Defence and Strategic Goods List without quotation marks are intended to take their ordinary dictionary meanings.

3.2 Notes

  The Notes, Technical Notes and Nota Bene (N.B.) appearing in the Defence and Strategic Goods List form an integral part of the control text.

3.3 Incorporated goods

  The object of the controls contained in the Defence and Strategic Goods List should not be defeated by the export of any non‑controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes.

Note: In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know‑how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.

3.4 New and used goods

  Goods specified in the Defence and Strategic Goods List include both new and used goods.

3.5 CAS numbers

  In some instances, chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because:

 (a) some forms of the listed chemical have different CAS numbers; and

 (b) mixtures containing a listed chemical may also have different CAS numbers.

3.6 Source code

  “Source code” items are controlled either by “software” or by “software” and “technology” controls, except when such “source code” items are explicitly decontrolled.

3.7 Medical equipment

  Equipment specially designed for medical end‑use that incorporates an item controlled in the Dual‑Use List is not controlled.

3.8 Nuclear technology note (NTN)

Note: To be read in conjunction with section E of Category 0.

3.81  The “technology” directly associated with any goods controlled in Category 0 is controlled according to the provisions of Category 0.

3.82  “Technology” for the “development”, “production” or “use” of goods under control remains under control even when applicable to non‑controlled goods.

3.83  The approval of goods for export also authorises the export to the same end‑user of the minimum “technology” required for the installation, operation, maintenance and repair of the goods.

3.84  Controls on “technology” transfer do not apply to information “in the public domain” or to “basic scientific research”.

3.9 General technology note (GTN)

Note: This note applies to all technology controls in Categories 1 to 9 of the Dual‑Use List.

3.91  The export of “technology” which is “required” for the “development”, “production” or “use” of goods controlled in Categories 1 to 9, is controlled according to the provisions of Categories 1 to 9.

3.92  “Technology” “required” for the “development”, “production” or “use” of goods under control remains under control even when applicable to non‑controlled goods.

3.93  Controls do not apply to that “technology” which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not controlled or whose export has been authorised.

Note: This does not release such “technology” specified by 1E002.e, 1E002.f, 8E002.a and 8E002.b.

3.94  Controls on “technology” transfer do not apply to information “in the public domain”, to “basic scientific research” or to the minimum necessary information for patent applications.

3.10 General software note (GSN)

Note: This note applies to all software controls in the Defence and Strategic Goods List.

3.101  The Defence and Strategic Goods List does not control “software” which is any of the following:

 (1) generally available to the public by being:

 (a) sold from stock at retail selling points, without restriction, by means of:

 1. over the counter transactions; or

 2. mail order transactions; or

 3. electronic transactions; or

 4. telephone order transactions; and

 (b) designed for installation by the user without further substantial support by the supplier;

Note: Entry (1) does not release “software” specified in Category 5 ‑ Part 2 (“Information Security”).

 (2) “in the public domain”;

 (3) the minimum necessary “object code” for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.

Note: Entry (3) does not release “software” controlled by Category 5 ‑ Part 2 (“Information Security”).

3.11 General “information security” note (GISN)

3.111  “Information security” items or functions should be considered against the provisions in Category 5 Part 2, even if they are components, “software” or functions of other items.

Division 4—Definitions

4.1  Definitions of terms between ‘single quotation marks’ are given in a Technical Note to the relevant item.

4.2  Definitions of terms between “double quotation marks” are as follows:

Note: Category references are given in brackets after the defined term.

“Accuracy” (2 3 6 7 8), usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.

“Active flight control systems” (7) are systems that function to prevent undesirable “aircraft” and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control.

“Active pixel” (6) is a minimum (single) element of the solid state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation.

“Additives” (ML8) means substances used in explosive formulations to improve their properties.

“Adjusted Peak Performance” (4) is an adjusted peak rate at which “digital computers” perform 64‑bit or larger floating point additions and multiplications, and is expressed in Weighted TeraFLOPS (WT) with units of 1012 adjusted floating point operations per second.

Note: See Category 4, Technical Note.

“Aircraft” (1 6 7 9 ML8 ML10 ML14) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt‑wing airborne vehicle.

Note: See also “civil aircraft”.

“Airship” (9) means a power‑driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air.

“All compensations available” (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine‑tool model are considered.

“Allocated by the ITU” (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services.

Note: Additional and alternative allocations are not included.

“Angle random walk” (7) means the angular error build up with time that is due to white noise in angular rate. (IEEE STD 528‑2001)

“Angular position deviation” (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position.

“Asymmetric algorithm” (5) means a cryptographic algorithm using different, mathematically related keys for encryption and decryption.

Note: A common use of “asymmetric algorithms” is key management.

“Authentication” (5) means verifying the identity of a user, process or device, often as a prerequisite to allowing access to resources in an information system. This includes verifying the origin or content of a message or other information, and all aspects of access control where there is no encryption of files or text except as directly related to the protection of passwords, Personal Identification Numbers (PINs) or similar data to prevent unauthorised access.

“Automated Command and Control Systems” (ML11) means electronic systems, through which information essential to the effective operation of the grouping, major formation, tactical formation, unit, ship, subunit or weapons under command is entered, processed and transmitted. This is achieved by the use of computer and other specialised hardware designed to support the functions of a military command and control organisation. The main functions of an automated command and control system are: the efficient automated collection, accumulation, storage and processing of information; the display of the situation and the circumstances affecting the preparation and conduct of combat operations; operational and tactical calculations for the allocation of resources among force groupings or elements of the operational order of battle or battle deployment according to the mission or stage of the operation; the preparation of data for appreciation of the situation and decision‑making at any point during operation or battle; computer simulation of operations.

“Average output power” (6) means the total “laser” output energy in joules divided by the “laser duration” in seconds.

“Basic gate propagation delay time” (3) means the propagation delay time value corresponding to the basic gate used in a “monolithic integrated circuit”. For a ‘family’ of “monolithic integrated circuits”, this may be specified either as the propagation delay time per typical gate within the given ‘family’ or as the typical propagation delay time per gate within the given ‘family’.

Note 1: “Basic gate propagation delay time” is not to be confused with the input/output delay time of a complex “monolithic integrated circuit”.

Note 2: ‘Family’ consists of all integrated circuits to which all of the following are applied as their manufacturing methodology and specifications except their respective functions:

(a) the common hardware and software architecture; and

(b) the common design and process technology; and

(c) the common basic characteristics.

“Basic scientific research” (GTN NTN ML22) means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.

“Bias” (accelerometer) (7) means the average over a specified time of accelerometer output measured at specified operating conditions that has no correlation with input acceleration or rotation. “Bias” is expressed in g or in metres per second squared (g or m/s2). (IEEE STD 528‑2001) (Micro g equals 1x10‑6 g).

“Bias” (gyro) (7) means the average over a specified time of gyro output measured at specified operating conditions that has no correlation with input rotation or acceleration. “Bias” is typically expressed in degrees per hour (deg/hr). (IEEE STD 528‑2001).

“Biocatalysts” (ML7 ML22) means ‘enzymes’ for specific chemical or biochemical reactions or other biological compounds which bind to and accelerate the degradation of CW agents.

‘Enzymes’ means “biocatalysts” for specific chemical or biochemical reactions.

“Biological agents” (1 ML7) means pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.

“Biopolymers” (ML7 ML22) means biological macromolecules as follows:

 (a) enzymes for specific chemical or biochemical reactions;

 (b) ‘anti‑idiotypic’, ‘monoclonal’ or ‘polyclonal’ ‘antibodies’;

 (c) specially designed or specially processed ‘receptors’.

1. ‘Anti‑idiotypic antibodies’ means antibodies which bind to the specific antigen binding sites of other antibodies;

2. ‘Monoclonal antibodies’ means proteins which bind to one antigenic site and are produced by a single clone of cells;

3. ‘Polyclonal antibodies’ means a mixture of proteins which bind to the specific antigen and are produced by more than one clone of cells;

4. ‘Receptors’ means biological macromolecular structures capable of binding ligands, the binding of which affects physiological functions.

“Camming” (2) means axial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle faceplate, at a point next to the circumference of the spindle faceplate (Reference: ISO 230/1 1986, paragraph 5.63).

“Chemical laser” (6) means a “laser” in which the excited species is produced by the output energy from a chemical reaction.

“Chemical mixture” (1) means a solid, liquid or gaseous product made up of two or more components that do not react together under normal storage conditions.

“Circuit elements” (6) means a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

“Circular Error Probable” (“CEP”) (7) means, in a circular normal distribution, the radius of the circle containing 50% of the individual measurements being made, or the radius of the circle within which there is a 50% probability of being located.

“Circulation‑controlled anti‑torque or circulation controlled direction control systems” (7) are systems that use air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces.

“Civil aircraft” (1 3 4 7 9 ML4 ML10) means those “aircraft” listed by designation in published airworthiness certification lists by the civil aviation authorities of one or more Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.

Note: See also “aircraft”.

“Common channel signalling” (5) is a signalling method in which a single channel between exchanges conveys, by means of labelled messages, signalling information relating to a multiplicity of circuits or calls and other information such as that used for network management.

“Communications channel controller” (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.

“Compensation systems” (6) consist of the primary scalar sensor, one or more reference sensors (e.g., vector “magnetometers”) together with software that permit reduction of rigid body rotation noise of the platform.

“Composite” (1 2 6 8 9) means a “matrix” and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes.

“III/V compounds” (3) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev’s periodic classification table (e.g., gallium arsenide, gallium‑aluminium arsenide, indium phosphide).

“Computing element” (“CE”) (4) means the smallest computational unit that produces an arithmetic or logic result.

“Contouring control” (2) means two or more “numerically controlled” motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (Ref. ISO 2806:1994).

“Critical temperature” (1 3 6) (sometimes referred to as the transition temperature) of a specific “superconductive” material means the temperature at which the material loses all resistance to the flow of direct electrical current.

“Cryptographic activation” (5) means any technique that activates or enables cryptographic capability of an item, by means of a secure mechanism implemented by the manufacturer of the item, where this mechanism is uniquely bound to either of the following:

 (1) a single instance of the item;

 (2) one customer, for multiple instances of the item.

1. “Cryptographic activation” techniques and mechanisms may be implemented as hardware, “software” or “technology”.

2. Mechanisms for “cryptographic activation” can, for example, be serial number‑based licence keys or authentication instruments such as digitally signed certificates.

“Cryptography” (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorised use. “Cryptography” is limited to the transformation of information using one or more ‘secret parameters’ (e.g., crypto variables) or associated key management.

Note 1: “Cryptography” does not include ‘fixed’ data compression or coding techniques.

Note 2: “Cryptography” includes decryption.

1. ‘Secret parameter’: a constant or key kept from the knowledge of others or shared only within a group.

2. ‘Fixed’: the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user.

“CW laser” (6) means a “laser” that produces a nominally constant output energy for greater than 0.25 seconds.

“Cyber incident response” (4 ML21) is the process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.

“Data‑Based Referenced Navigation” (“DBRN”) (7) Systems means systems which use various sources of previously measured geo‑mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include bathymetric maps, stellar maps, gravity maps, magnetic maps or 3‑D digital terrain maps.

“Deactivated firearm” (ML1) means a firearm that:

 (a) was in a condition in which it could discharge shot, bullets or other projectiles by means of an explosive charge or a compressed gas; and

 (b) has been rendered incapable of discharging shot, bullets or other projectiles by means of an explosive charge or a compressed gas; and

 (c) cannot be returned to a condition in which it could discharge shot, bullets or other projectiles by means of an explosive charge or a compressed gas; and

 (d) still has the appearance of a firearm, and could reasonably be taken to be a firearm.

Note: A firearm can be deactivated to the extent that it is incapable of being returned to its original firing condition, while keeping the appearance of a firearm. For the article to be incapable of being returned to its original firing condition, all major parts of the article must be destroyed, permanently incapacitated or permanently immobilised. This includes (but is not limited to) the bolt, barrel, gas system, receiver, trigger, sear or hammer, feed pawls and actuating arm or arms. This can be done by any of the following:

(a) fusion welding, which is welding material into the barrel, and welding of all the major parts of the firearm, in a way that cannot be reversed;

(b) sectioning, which is the machining or milling of all the major parts of the firearm in a way that cannot be reversed, exposing the internal mechanism;

(c) another method of treating the major parts that ensures that the parts are deactivated to the extent that the firearm is incapable of being returned to its original firing condition.

“Depleted uranium” (0) means uranium depleted in the isotope 235 below that occurring in nature.

“Development” (GTN NTN All) is related to all stages prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.

“Diffusion bonding” (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material, wherein the principal mechanism is interdiffusion of atoms across the interface.

“Digital computer” (4 5 ML21) means equipment which can, in the form of one or more discrete variables, perform all of the following:

 (a) accept data;

 (b) store data or instructions in fixed or alterable (writable) storage devices;

 (c) process data by means of a stored sequence of instructions which is modifiable; and

 (d) provide output of data.

Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections.

“Digital transfer rate” (5) means the total bit rate of the information that is directly transferred on any type of medium.

Note: See also “total digital transfer rate”.

“Discrete component” means a separately packaged “circuit element” with its own external connections.

“Electronic assembly” (2 3 4) means a number of electronic components (i.e., ‘circuit elements’, ‘discrete components’, integrated circuits, etc.) connected together to perform (a) specific function(s), replaceable as an entity and normally capable of being disassembled.

Note 1: ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

Note 2: ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.

“End‑effectors” (2 ML17) means grippers, ‘active tooling units’ and any other tooling that is attached to the baseplate on the end of a “robot” manipulator arm.

Note: ‘Active tooling units’ are devices for applying motive power, process energy or sensing to the workpiece.

“Energetic materials” (ML 4 ML8 ML908 ML909) mean substances or mixtures that react chemically to release energy required for their intended application. “Explosives”, “pyrotechnics” and “propellants” are subclasses of energetic materials.

“Equivalent Density” (6) means the mass of an optic per unit optical area projected onto the optical surface.

“Equivalent standards” (1 ML6 ML13) are comparable national or international standards recognised by one or more Wassenaar Arrangement Participating States and applicable to the relevant entry.

“Explosives” (ML8 ML18 ML909) mean solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.

“Expression Vectors” (ML7) mean carriers (e.g., plasmid or virus) used to introduce genetic material into host cells.

“Fibrous or filamentary materials” (0 1 2 8 9 ML13) include:

 (a) continuous “monofilaments”;

 (b) continuous “yarns” and “rovings”;

 (c) “tapes”, fabrics, random mats and braids;

 (d) chopped fibres, staple fibres and coherent fibre blankets;

 (e) whiskers, either monocrystalline or polycrystalline, of any length;

 (f) aromatic polyamide pulp.

“Film type integrated circuit” (3) means an array of ‘circuit elements’ and metallic interconnections formed by deposition of a thick or thin film on an insulating “substrate”.

Note: ‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

“First generation image intensifier tubes” (ML15) means electrostatically focused tubes, employing input and output fibre optic or glass face plates, multi‑alkali photocathodes (S‑20 or S‑25), but not microchannel plate amplifiers.

“Fly‑by‑light system” (7) is a primary digital flight control system employing feedback to control the “aircraft” during flight, where the commands to the effectors/actuators are optical signals.

“Fly‑by‑wire system” (7) is primary digital flight control system employing feedback to control the “aircraft” during flight, where the commands to the effectors/actuators are electrical signals.

“Focal plane array” (6) means a linear or two‑dimensional planar layer, or combination of planar layers, of individual detector elements, with or without readout electronics, which work in the focal plane.

Note: This definition does not include a stack of single detector elements or any two, three or four element detectors provided time delay and integration is not performed within the element.

“Fractional bandwidth” (3) means the “instantaneous bandwidth” divided by the centre frequency, expressed as a percentage.

“Frequency hopping” (5 6) means a form of “spread spectrum” in which the transmission frequency of a single communication channel is made to change by a random or pseudo‑random sequence of discrete steps.

“Frequency switching time” (3) means the time (i.e., delay) taken by a signal when switched from an initial specified output frequency, to arrive at or within any of the following:

 (a) ±100 Hz of a final specified output frequency of less than 1 GHz; or

 (b) ±0.1 part per million of a final specified output frequency equal to or greater than 1 GHz.

“Fuel cell” (8 ML17) means an electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source.

“Full Authority Digital Engine Control Systems” (“FADEC Systems”) (9) means an electronic control system for gas turbine or combined cycle engines utilising a digital computer to control the variables required to regulate engine thrust or shaft power output throughout the engine operating range from the beginning of fuel metering to fuel shutoff.

“Fusible” (1) means capable of being cross‑linked or polymerised further (cured) by the use of heat, radiation, catalysts, etc., or that can be melted without pyrolysis (charring).

“Guidance set” (7) means systems that integrate the process of measuring and computing a vehicle’s position and velocity (i.e. navigation) with that of computing and sending commands to the vehicle’s flight control systems to correct the trajectory.

“Hard selectors” (5P1) means data or a set of data, related to an individual (e.g., family name, given name, email address, street address, phone number or group affiliations).

“Hybrid computer” (4) means equipment which can perform all of the following:

 (a) accept data;

 (b) process data, in both analogue and digital representations;

 (c) provide output of data.

“Hybrid integrated circuit” (3) means any combination of integrated circuit(s), or integrated circuit with ‘circuit elements’ or ‘discrete components’ connected together to perform (a) specific function(s), and having all of the following characteristics:

 (a) containing at least one unencapsulated device;

 (b) connected together using typical IC production methods;

 (c) replaceable as an entity;

 (d) not normally capable of being disassembled.

Note 1: ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

Note 2: ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.

“Image enhancement” (4) means the processing of externally derived information‑bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration.

“Immunotoxin” (1) is a conjugate of one cell specific monoclonal antibody and a “toxin” or “sub‑unit of toxin”, that selectively affects diseased cells.

“Information security” (GSN GTN 5P2) is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes “cryptography”, “cryptographic activation”, ‘cryptanalysis’, protection against compromising emanations and computer security.

Note: ‘Cryptanalysis’ is the analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, including clear text. (ISO 7498‑2‑1988 (E), paragraph 3.3.18).

“Instantaneous bandwidth” (3 5 7) means the bandwidth over which output power remains constant within 3 dB without adjustment of other operating parameters.

“Insulation” (9) is applied to the components of a rocket motor, i.e. the case, nozzle, inlets, case closures, and includes cured or semi‑cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps.

“Interior lining” (9) is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior.

“Interleaved Analogue‑to‑Digital Converter (ADC)” (3) means devices that have multiple ADC units that sample the same analogue input at different times such that when the outputs are aggregated, the analogue input has been effectively sampled and converted at a higher sampling rate.

“In the public domain” (GTN NTN GSN ML22), as it applies herein, means “technology” or “software” which has been made available without restrictions upon its further dissemination (copyright restrictions do not remove “technology” or “software” from being “in the public domain”).

“Intrinsic Magnetic Gradiometer” (6) is a single magnetic field gradient sensing element and associated electronics the output of which is a measure of magnetic field gradient.

Note: See also “magnetic gradiometer”.

“Intrusion software” (4 5P2) is “Software” specially designed or modified to avoid detection by ‘monitoring tools’, or to defeat ‘protective countermeasures’, of a computer or network‑capable device, and performing any of the following:

 (a) the extraction of data or information, from a computer or network‑capable device, or the modification of system or user data; or

 (b) the modification of the standard execution path of a program or process in order to allow the execution of externally provided instructions.

Note 1: “Intrusion software” does not include any of the following:

(a) hypervisors, debuggers or Software Reverse Engineering (SRE) tools;

(b) Digital Rights Management (DRM) “software”; or

(c) “Software” designed to be installed by manufacturers, administrators or users, for the purposes of asset tracking or recovery.

Note 2: Network‑capable devices include mobile devices and smart meters.

1. ‘Monitoring tools’: “software” or hardware devices, that monitor system behaviours or processes running on a device. This includes antivirus (AV) products, end point security products, Personal Security Products (PSP), Intrusion Detection Systems (IDS), Intrusion Prevention Systems (IPS) or firewalls.

2. ‘Protective countermeasures’: techniques designed to ensure the safe execution of code, such as Data Execution Prevention (DEP), Address Space Layout Randomisation (ASLR) or sandboxing.

“Isolated live cultures” (1) includes live cultures in dormant form and in dried preparations.

“Isostatic presses” (2) mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material.

“Laser” (0 1 2 3 5P1 6 7 8 9 ML5 ML9 ML19) is an item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation.

“Laser duration” (6) means the time over which a “laser” emits “laser” radiation, which for “pulsed lasers” corresponds to the time over which a single pulse or series of consecutive pulses is emitted.

“Library” (parametric technical database) (1 ML17) is a collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components.

“Lighter‑than‑air vehicles” (ML10) mean balloons and “airships” that rely on hot air or on lighter‑than‑air gases such as helium or hydrogen for their lift.

“Local area network” (4) is a data communication system having all of the following characteristics:

 (a) allows an arbitrary number of independent ‘data devices’ to communicate directly with each other;

 (b) is confined to a geographical area of moderate size (e.g., office building, plant, campus, warehouse).

Note: ‘Data device’ means equipment capable of transmitting or receiving sequences of digital information.

“Magnetic gradiometers” (6) are instruments designed to detect the spatial variation of magnetic fields from sources external to the instrument. They consist of multiple “magnetometers” and associated electronics the output of which is a measure of magnetic field gradient.

Note: See also “intrinsic magnetic gradiometer”.

“Magnetometers” (6) are instruments designed to detect magnetic fields from sources external to the instrument. They consist of a single magnetic field sensing element and associated electronics the output of which is a measure of the magnetic field.

“Materials resistant to corrosion by UF6” (0) may be copper, stainless steel, aluminium, aluminium oxide, aluminium alloys, nickel or alloy containing 60 weight percent or more nickel and UF6 resistant fluorinated hydrocarbon polymers, as appropriate for the type of separation process.

“Matrix” (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.

“Measurement uncertainty” (2) is the characteristic parameter which specifies in what range around the output value the correct value of the measurable variable lies with a confidence level of 95%. It includes the uncorrected systematic deviations, the uncorrected backlash and the random deviations (Reference: ISO 10360‑2).

“Microcomputer microcircuit” (3) means a “monolithic integrated circuit” or “multichip integrated circuit” containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage.

Note: The internal storage may be augmented by an external storage.

“Microorganisms” (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material, including living material, which has been deliberately inoculated or contaminated with such cultures.

“Microprocessor microcircuit” (3) means a “monolithic integrated circuit” or “multichip integrated circuit” containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage.

Note 1: The “microprocessor microcircuit” normally does not contain integral user‑accessible storage, although storage present on‑the‑chip may be used in performing its logic function.

Note 2: This includes chip sets which are designed to operate together to provide the function of a “microprocessor microcircuit”.

“Microprogram” means a sequence of elementary instructions maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction register.

“Missiles” (1 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km.

“Monofilament” (1) or filament is the smallest increment of fibre, usually several micrometres in diameter.

“Monolithic integrated circuit” (3) means a combination of passive or active ‘circuit elements’ or both which:

 (a) are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so‑called ‘chip’; and

 (b) can be considered as indivisibly associated; and

 (c) perform the function(s) of a circuit.

Note: ‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

“Monolithic Microwave Integrated Circuit” (“MMIC”) (3 5) means a “monolithic integrated circuit” that operates at microwave or millimeter wave frequencies.

“Monospectral imaging sensors” (6) are capable of acquisition of imaging data from one discrete spectral band.

“Multichip integrated circuit” (3) means two or more “monolithic integrated circuits” bonded to a common “substrate”.

“Multiple channel Analogue‑to‑Digital Converter (ADC)” (3) means devices that integrate more than one ADC, designed so that each ADC has a separate analogue input.

“Multispectral imaging sensors” (6) are capable of simultaneous or serial acquisition of imaging data from two or more discrete spectral bands. Sensors having more than twenty discrete spectral bands are sometimes referred to as hyperspectral imaging sensors.

“Natural uranium” (0) means uranium containing the mixtures of isotopes occurring in nature.

“Network access controller” (4) means a physical interface to a distributed switching network. It uses a common medium which operates throughout at the same “digital transfer rate” using arbitration (e.g., token or carrier sense) for transmission. Independently from any other, it selects data packets or data groups (e.g., IEEE 802) addressed to it. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.

“Nuclear reactor” (0 ML17) means the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain, come into direct contact with or control the primary coolant of the reactor core.

“Numerical control” (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (Ref. ISO 2382:2015).

“Object code” (GSN) means an equipment executable form of a convenient expression of one or more processes (“source code” (source language)) which has been converted by programming system.

“Operations, Administration or Maintenance” (“OAM”) (5) means performing one or more of the following tasks:

 (a) establishing or managing any of the following:

 (1) accounts or privileges of users or administrators;

 (2) settings of an item;

 (3) authentication data in support of the tasks described in paragraphs (a)(1) or (a)(2);

 (b) monitoring or managing the operating condition or performance of an item;

 (c) managing logs or audit data in support of any of the tasks described in paragraphs (a) or (b).

Note: “OAM” does not include any of the following tasks or their associated key management functions:

(a) provisioning or upgrading any cryptographic functionality that is not directly related to establishing or managing authentication data in support of the tasks described in paragraphs (a)(1) or (a)(2) above;

(b) performing any cryptographic functionality on the forwarding or data plane of an item.

“Optical integrated circuit” (3) means a “monolithic integrated circuit” or a “hybrid integrated circuit”, containing one or more parts designed to function as a photosensor or photoemitter or to perform (an) optical or (an) electro‑optical function(s).

“Optical switching” (5) means the routing of or switching of signals in optical form without conversion to electrical signals.

“Overall current density” (3) means the total number of ampere‑turns in the coil (i.e., the sum of the number of turns multiplied by the maximum current carried by each turn) divided by the total cross‑section of the coil (comprising the superconducting filaments, the metallic matrix in which the superconducting filaments are embedded, the encapsulating material, any cooling channels, etc.).

“Peak power” (6), means the highest level of power attained in the “laser duration”.

“Personal area network” (5) is a data communication system having all of the following characteristics:

 (a) allows an arbitrary number of independent or interconnected ‘data devices’ to communicate directly with each other; and

 (b) is confined to the communication between devices within the immediate physical vicinity of an individual person or device controller (e.g., single room, office or automobile).

1. ‘Data device’ means equipment capable of transmitting or receiving sequences of digital information.

2. The “local area network” extends beyond the geographical area of the “personal area network”.

“Precursors” (ML8) means specialty chemicals used in the manufacture of military explosives.

“Pressure transducers” (2) are devices that convert pressure measurements into an electrical signal.

“Principal element” (4), as it applies in Category 4, is a “principal element” when its replacement value is more than 35% of the total value of the system of which it is an element. Element value is the price paid for the element by the manufacturer of the system, or by the system integrator. Total value is the normal international selling price to unrelated parties at the point of manufacture or consolidation of shipment.

“Production” (GTN NTN All) means all production phases, such as: construction, production engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance.

“Production equipment” (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for “development” or for one or more phases of “production”.

“Production facilities” (7 9) means equipment and specially designed software therefor integrated into installations for “development” or for one or more phases of “production”.

“Program(s)” (2 4 5 6) means a sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.

“Propellants” (ML8) Substances or mixtures that react chemically to produce large volumes of hot gases at controlled rates to perform mechanical work.

“Pulse compression” (6) means the coding and processing of a radar signal pulse of long time duration to one of short time duration, while maintaining the benefits of high pulse energy.

“Pulse duration” (6) is the duration of a “laser” pulse measured at Full Width Half Intensity (FWHI) levels.

“Pulsed laser” (6) means a “laser” having a “pulse duration” that is less than or equal to 0.25 seconds.

“Pyrotechnic(s)” (ML4 ML8 ML909) means mixtures of solid or liquid fuels and oxidisers which, when ignited, undergo an energetic chemical reaction at a controlled rate intended to produce specific time delays, or quantities of heat, noise, smoke, visible light or infrared radiation. Pyrophorics are a subclass of pyrotechnics, which contain no oxidisers but ignite spontaneously on contact with air.

“Quantum cryptography” (5) means a family of techniques for the establishment of a shared key for “cryptography” by measuring the quantum‑mechanical properties of a physical system (including those physical properties explicitly governed by quantum optics, quantum field theory, or quantum electrodynamics).

“Radar frequency agility” (6) means any technique which changes, in a pseudo‑random sequence, the carrier frequency of a pulsed radar transmitter between pulses or between groups of pulses by an amount equal to or larger than the pulse bandwidth.

“Radar spread spectrum” (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo‑random coding.

“Radiant sensitivity” (6) Radiant sensitivity (mA/W) = 0.807 x (wavelength in nm) x Quantum Efficiency (QE).

QE is usually expressed as a percentage; however, for the purposes of this formula QE is expressed as a decimal number less than one, e.g., 78% is 0.78.

“Real time processing” (6) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event.

“Repeatability” (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non‑operating periods occur between measurements. (Reference: IEEE STD 528‑2001 (one sigma standard deviation)).

“Required” (GTN 1 5 6 7 9 ML22), as applied to “technology”, refers to only that portion of “technology” which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such “required” “technology” may be shared by different goods.

“Riot control agents” (ML7) mean substances which, under the expected conditions of use for riot control purposes, rapidly produce in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure.

Tear gases are a subset of “riot control agents”.

“Robot” (2 8 ML17) means a manipulation mechanism, which may be of the continuous path or of the point‑to‑point variety, may use sensors, and has all the following characteristics:

 (a) is multifunctional;

 (b) is capable of positioning or orienting material, parts, tools or special devices through variable movements in three dimensional space;

 (c) incorporates three or more closed or open loop servo‑devices which may include stepping motors;

 (d) has “user‑accessible programmability” by means of teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e., without mechanical intervention.

Note: The above definition does not include the following devices:

1. Manipulation mechanisms which are only manually/teleoperator controllable;

2. Fixed sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is mechanically limited by fixed stops, such as pins or cams. The sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means;

3. Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is mechanically limited by fixed, but adjustable stops, such as pins or cams. The sequence of motions and the selection of paths or angles are variable within the fixed program pattern. Variations or modifications of the program pattern (e.g., changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations;

4. Non‑servo‑controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The program is variable but the sequence proceeds only by the binary signal from mechanically fixed electrical binary devices or adjustable stops;

5. Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval.

“Roving” (1) is a bundle (typically 12–120) of approximately parallel ‘strands’.

“Run‑out” (2) (out‑of‑true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1‑1986, paragraph 5.61).

“Sample rate” (3) means for an Analogue‑to‑Digital Converter (ADC) the maximum number of samples that are measured at the analogue input over a period of one second, except for oversampling ADCs. For oversampling ADCs the “sample rate” is taken to be its output word rate. “Sample rate” may also be referred to as sampling rate, usually specified in Mega Samples Per Second (MSPS) or Giga Samples Per Second (GSPS), or conversion rate, usually specified in Hertz (Hz).

“Satellite navigation system” (5P2 7 ML11) means a system consisting of ground stations, a constellation of satellites, and receivers, that enables receiver locations to be calculated on the basis of signals received from the satellites. It includes Global Navigation Satellite Systems and Regional Navigation Satellite Systems.

“Scale factor” (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured. Scale factor is generally evaluated as the slope of the straight line that can be fitted by the method of least squares to input‑output data obtained by varying the input cyclically over the input range.

“Signal analysers” (3) mean apparatus capable of measuring and displaying basic properties of the single‑frequency components of multi‑frequency signals.

“Signal processing” (3 4 5 6) means the processing of externally derived information‑bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform).

“Software” (GSN All) means a collection of one or more “programs” or “microprograms” fixed in any tangible medium of expression.

“Source code” (or source language) (4 6 7 9) is a convenient expression of one or more processes which may be turned by a programming system into equipment executable form (“object code” (or object language)).

“Spacecraft” (7 9 ML11) means active and passive satellites and space probes.

“Spacecraft bus” (9) is equipment that provides the support infrastructure of the “spacecraft” and location for the “spacecraft payload”.

“Spacecraft payload” (9) is equipment, attached to the “spacecraft bus”, designed to perform a mission in space (e.g., communications, observation, science).

“Space‑qualified” (3 6 7 9 ML19) refers to products designed, manufactured, or qualified through successful testing, for operation at altitudes greater than 100 km above the surface of the Earth.

Note: A determination that a specific item is “space‑qualified” by virtue of testing does not mean that other items in the same production run or model series are “space‑qualified” if not individually tested.

“Special fissile material” (0) means plutonium‑239, uranium‑233, “uranium enriched in the isotopes 235 or 233”, and any material containing the foregoing.

“Specific modulus” (0 1 9) is Young’s modulus in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2)oC) and a relative humidity of (50 ± 5)%.

“Specific tensile strength” (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2)oC) and a relative humidity of (50 ± 5)%.

“Spinning mass gyros” (7) “Spinning mass gyros” are gyros which use a continually rotating mass to sense angular motion.

“Spread spectrum” (5) means the technique whereby energy in a relatively narrow‑band communication channel is spread over a much wider energy spectrum.

“Spread spectrum” radar (6) — see “Radar spread spectrum”.

“Stability” (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.

For gyroscopes and accelerometers, “stability” can be estimated by determining the Allan variance noise‑analysis value at the integration period (i.e., sample time) consistent with the stated measurement period, which may include extrapolating the Allan variance noise analysis beyond the instability point into the rate/acceleration random walk or rate/acceleration ramp regions to an integration period consistent with the stated measurement period (Reference: IEEE Std 952‑1997 [R2008] or IEEE Std 1293‑1998 [R2008]).

“States not Party to the Chemical Weapon Convention” (1) are those states for which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons has not entered into force. (See www.opcw.org)

“States Party to the Chemical Weapon Convention” (1) are those states for which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons has entered into force. (See www.opcw.org)

“Steady state mode” (9) defines engine operation conditions, where the engine parameters, such as thrust/power, rpm and others, have no appreciable fluctuations, when the ambient air temperature and pressure at the engine inlet are constant.

“Sub‑orbital craft” is a craft having an enclosure designed for the transport of people or cargo, which is designed to:

 (a) operate above the stratosphere;

 (b) perform a non‑orbital trajectory; and

 (c) land back on Earth with the people or cargo intact.

“Substrate” (3) means a sheet of base material with or without an interconnection pattern and on which or within which ‘discrete components’ or integrated circuits or both can be located.

Note 1: ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.

Note 2: ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.

“Substrate blanks” (3 6) means monolithic compounds with dimensions suitable for the production of optical elements such as mirrors or optical windows.

“Sub‑unit of toxin” (1) is a structurally and functionally discrete component of a whole “toxin”.

“Superalloy” (2 9) means nickel‑, cobalt‑ or iron‑base alloys having a stress rupture life greater than 1,000 hours at 400 MPa and an ultimate tensile strength greater than 850 MPa, at 922 K (649°C) or higher.

“Superconductive” (1 3 6 8 ML18 ML20) means materials, i.e., metals, alloys or compounds, which can lose all electrical resistance, i.e., which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating.

Note: The “superconductive” state of a material is individually characterised by a “critical temperature”, a critical magnetic field, which is a function of temperature, and a critical current density which is, however, a function of both magnetic field and temperature.

“Super‑High Power Laser” (“SHPL”) (6) means a “laser” capable of delivering (the total or any portion of) the output energy exceeding 1 kJ within 50 ms or having an average or CW power exceeding 20 kW.

“Superplastic forming” (1 2) means a deformation process using heat for metals that are normally characterised by low values of elongation (less than 20%) at the breaking point as determined at room temperature by conventional tensile strength testing, in order to achieve elongations during processing which are at least 2 times those values.

“Symmetric algorithm” (5) means a cryptographic algorithm using an identical key for both encryption and decryption.

Note: A common use of “symmetric algorithms” is confidentiality of data.

“Tape” (1) is a material constructed of interlaced or unidirectional “monofilaments”, ‘strands’, “rovings”, “tows”, or “yarns”, etc., usually preimpregnated with resin.

“Technology” (GTN NTN All) means specific information necessary for the “development”, “production” or “use” of a product. This information takes the form of ‘technical data’ or ‘technical assistance’. Specified “technology” for the Dual‑Use List is defined in the General Technology Note and in the Dual‑Use List. Specified “technology” for the Munitions List is defined in ML22.

Note 1: ‘Technical assistance’ may take forms such as instruction, skills, training, working knowledge and consulting services and may involve the transfer of ‘technical data’.

Note 2: ‘Technical data’ may take forms such as blueprints, plans, diagrams, models, formulae, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read‑only memories.

“Three dimensional integrated circuit” (3) means collection of semiconductor dies or active device layers, integrated together, and having through semiconductor via connections passing completely through an interposer, substrate, die or layer to establish interconnections between the device layers. An interposer is an interface that enables electrical connections.

“Tilting spindle” (2) means a tool‑holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis.

“Time constant” (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1‑1/e times the final value (i.e., 63% of the final value).

“Time to steady‑state registration” (6) (also referred to as the gravity meter’s response time) is the time over which the disturbing effects of platform‑induced acceleration (high frequency noise) are reduced.

“Tip shroud” (9) means a stationary ring component (solid or segmented) attached to the inner surface of the engine turbine casing or a feature at the outer tip of the turbine blade, which primarily provides a gas seal between the stationary and rotating components.

“Total control of flight” (7) means an automated control of “aircraft” state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other “aircraft”.

“Total digital transfer rate” (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system.

Note: See also “digital transfer rate”.

“Tow” (1) is a bundle of “monofilaments”, usually approximately parallel.

“Toxins” (1 2) means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of “microorganisms”.

“Tunable” (6) means the ability of a “laser” to produce a continuous output at all wavelengths over a range of several “laser” transitions. A line selectable “laser” produces discrete wavelengths within one “laser” transition and is not considered “tunable”.

“Unidirectional positioning repeatability” (2) means the smaller of values R↑ and R↓ (forward and backward), as defined by 3.21 of ISO 230‑2:2014 or national equivalents, of an individual machine tool axis.

“Unmanned aerial vehicle” (“UAV”) (9 ML10) means any “aircraft” capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.

“Uranium enriched in the isotopes 235 or 233” (0) means uranium containing the isotopes 235 or 233, or both, in an amount such that the abundance ratio of the sum of these isotopes to the isotope 238 is more than the ratio of the isotope 235 to the isotope 238 occurring in nature (isotopic ratio 0.71 per cent).

“Use” (GTN NTN Dual‑Use List) means operation, installation (including on‑site installation), maintenance (checking), repair, overhaul and refurbishing.

“User‑accessible programmability” (6) means the facility allowing a user to insert, modify or replace “programs” by means other than:

 (a) a physical change in wiring or interconnections; or

 (b) the setting of function controls including entry of parameters.

“Vaccine” (1) is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered.

“Vacuum electronic devices” (3) are electronic devices based on the interaction of an electron beam with an electromagnetic wave propagating in a vacuum circuit or interacting with radio‑frequency vacuum cavity resonators. “Vacuum electronic devices” include klystrons, travelling‑wave tubes, and their derivatives.

“Viruses” (1 2) are an infectious agent generally composed of genetic material packaged with a protein coat. “Viruses” must infect host cells in order to replicate, burst out of the host cell, and spread the infection.

“Vulnerability disclosure” (4 ML21) is the process of identifying, reporting or communicating a vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting or coordinating remediation for the purpose of resolving the vulnerability.

“Yarn” (1) is a bundle of twisted ‘strands’.