72Required information for offsets reports—net abatement calculations

72  Required information for offsets reports—net abatement calculations

  An offsets report about a project for a reporting period must include details of the net abatement calculations for the reporting period, including the following:

 (a) the output of each equation in this instrument used to calculate the net abatement amount for the reporting period;

 (b) if landfill gas capture for biomethane is carried out as part of the project—details about the biomethane production loss factor used to calculate net abatement;

 (c) if biomethane production is carried out as part of the project—details of the displacement abatement calculations (that is, calculations made under Division 2 of Part 5), including the following:

 (i) information on volumes and methane concentrations of biomethane produced during the reporting period;

 (ii) volumes and eligible abatement fractions of biogas treated by each project biomethane facility during the reporting period;

 (iii) information on the sources and volumes of project emissions from treatment of biogas by biogas upgrading;

 (iv) if QBG, EI, g is determined in accordance with equation 28 for a reporting period:

1.                 an explanation of how the proportion of biogas that is eligible biogas (EBg) was determined; and
2.                  evidence or data supporting how EBg was calculated; and
3.                  a signed declaration from the person who estimated EBg that the value for that factor is accurate and conservative.