sch.2-sec-oc.3Signage

sch.2-sec-oc.3 Signage

Signage

(1A) This clause applies to the following signage—

(a) a business identification sign that is displayed on a freestanding structure that is mounted on the ground on one or more supports,

(b) a business identification sign that is mounted on an entrance gate to the property to which the signage relates.

(1) The following applies to all signage to which this clause applies—

(a) must be non-moving,

(b) must relate to a lawful use of the land on which the sign is located,

(c) must be within (or, in the case of a sign referred to in subclause (1A)(b), within or on) the boundary of the property to which the signage relates,

(d) must not obstruct the sight line of vehicular or pedestrian traffic,

(e) must have the consent of the owner of the property on which the sign is located,

(f) must not be illuminated or flashing,

(g) must not be located on a heritage item or in a heritage conservation area unless the advertisement will replace existing signage.

(2) Signage to which this clause applies that is erected in a residential zone must comply with the following—

(a) maximum area—0.6m2,

(b) 1 sign per premises.

(3) Signage to which this clause applies that is erected in a rural zone must comply with the following—

(a) maximum area—0.75m2,

(b) 1 sign per premises,

(c) must not be located within 250m of a classified road.

(4)–(12) (Repealed)

Note.

Subdivision 8 (Replacement of identification signs) of Division 2 of Part 2 of State Environmental Planning Policy (Exempt and Complying Development Codes) 2008 applies to the replacement of an existing business identification sign or the content of such a sign.