Z Zoe Where to start with an Australian legal problem: plain-English guides, with the legislation and case law behind them.
Home / Legislation / Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters / 1 CTH In Force Legislation
Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters
1Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters Start here
Get a plain-English read of 1 Turn the raw legal text into a practical explanation grounded in Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters.
Explain section Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Schweizer (Hughes) 269 Series Helicopters
AD Name AD Number
Rod End Bearings - CANCELLED AD/HU 269/1
Belt Drive Idler Pulley Assembly - CANCELLED AD/HU 269/2
Landing Gear and Horizontal Stabilizer Attachment - CANCELLED AD/HU 269/3
Bracket Assembly Belt Guide and Support - CANCELLED AD/HU 269/4
Belt Drive Idler Pulley Arm - CANCELLED AD/HU 269/5
Main Rotor Blade Spacers - CANCELLED AD/HU 269/6
Lower Pulley Coupling Shaft - CANCELLED AD/HU 269/7
Clutch Control Handle Down Lock - CANCELLED AD/HU 269/8
Collective Pitch Friction Guide - CANCELLED AD/HU 269/9
Lower Coupling Drive Shaft - Inspection and Replacement AD/HU 269/10
Main Rotor Blade - Inspection AD/HU 269/11 Amdt 3
Main Rotor Blade Flapping Hinge - Inspection AD/HU 269/12
Belt Drive Idler Pulley Bearing - CANCELLED AD/HU 269/13 Amdt 1
Battery Support Bracket - Inspection AD/HU 269/14
Impeller Flywheel Assembly - CANCELLED AD/HU 269/15
Horizontal Stabiliser - Inspection AD/HU 269/16 Amdt 4
Tail Rotor Transmission Housing - Inspection AD/HU 269/17
Tail Boom - Inspection AD/HU 269/18
Engine Mount Hanger - Inspection AD/HU 269/19 Amdt 1
Fuel Injection Lines - CANCELLED AD/HU 269/20 Amdt 1
Main Rotor Blades - Inspection AD/HU 269/21 Amdt 3
Belt Drive Idler Pulley Pivot Shaft - CANCELLED AD/HU 269/22
Main Rotor Gear Drive Assembly - Inspection and Replacement AD/HU 269/23 Amdt 8
Cabin Sealing - CANCELLED AD/HU 269/24
Lateral Control Bellcrank (P/N 269A7506) - Replacement AD/HU 269/25 Amdt 1
Section 1 - Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters - Airworthiness Directives 2004 - Revocation and Remaking - Schweizer (Hughes) 269 Series Helicopters | Zoe Retirement Life - Critical Components AD/HU 269/26 Amdt 16
Lower Coupling Drive Shaft - Inspection AD/HU 269/27 Amdt 1
Main Rotor Thrust Bearing P/N 269A5050-50 or -51 Nut and Mast - Inspection AD/HU 269/28 Amdt 3
Tail Rotor Blade Assembly - Inspection AD/HU 269/29
Main Rotor Mast - Inspection - CANCELLED AD/HU 269/30 Amdt 3
Tail Rudder Pedal Arms - CANCELLED AD/HU 269/31
Tail Rotor Gearbox - Inspection and/or Replacement AD/HU 269/32 Amdt 1
Main Rotor Mast - Inspection for Internal Corrosion AD/HU 269/33
Hinge Bolts - CANCELLED AD/HU 269/34 Amdt 1
Main Rotor Drive Shaft - Inspection for Corrosion AD/HU 269/35 Amdt 1
Main Rotor Blade Thrust Bearing - CANCELLED AD/HU 269/36
Main Rotor Lead - Lag and Flapping Hinge Bolts P/N HS1446-10-68 Vendo AD/HU 269/37
Tail Boom Support Struts - CANCELLED AD/HU 269/38 Amdt 1
Engine Exhaust System - Inspection AD/HU 269/39 Amdt 1
Main Rotor Hub and Shaft Assemblies P/Nos 269A5305 and 269A5305-9 - AD/HU 269/40
Main Rotor Thrust Bearing P/N 269A5050-73 - Inspection for Runout AD/HU 269/41
Belt Driven Idler Pulley Assembly - CANCELLED AD/HU 269/42 Amdt 1
Clutch Handle Latch - CANCELLED AD/HU 269/43
Tail Rotor Control Stop - Inspection AD/HU 269/44
Magneto Distributor Bushing - Inspection, Lubrication and Replacement - AD/HU 269/45 Amdt 1
Magneto Grommet - Replacement - CANCELLED AD/HU 269/46
Main Rotor Blade Root Fitting Bolts - Main Rotor Blade Damper Bolts - AD/HU 269/47
Canopy Slat - Inspection and Modification AD/HU 269/48 Amdt 1
Engine Cooling Impeller - Bolt Inspection AD/HU 269/49
Main Rotor Mast and Tailboom Supports - Inspection and Modification AD/HU 269/50 Amdt 1
Tail Rotor Control System Pedal Installation - Inspection and Modification AD/HU 269/51 Amdt 1
Linear Clutch Actuator - Inspection AD/HU 269/52
Fibreglass Tail Rotor Blades - Inspection AD/HU 269/53
Collective Pitch Throttle Gear - Inspection and Replacement AD/HU 269/54
Lateral Cyclic Trim Control Assembly - Inspection AD/HU 269/55
Tailboom Support Strut End Fittings - Inspection and Modification AD/HU 269/56
Centre Frame Aft Cluster Fitting AD/HU 269/57 Amdt 4
Linear Clutch Actuator End Fitting and Shaft - Inspection AD/HU 269/58
Cockpit Placard - Removal AD/HU 269/59
Throttle Control Cable - Inspection - CANCELLED AD/HU 269/60
Fuel Tank Sump Cap Attachment - Inspection AD/HU 269/61
Tail Rotor Hub - Inspection and Modification AD/HU 269/62 Amdt 1
Main Transmission Pinion Assembly - Inspection - CANCELLED AD/HU 269/63 Amdt 2
Tail Rotor Assembly - Component Replacement, Inspection and Revised AD/HU 269/64 Amdt 1
Tail Rotor Blade Corrosion AD/HU 269/65 Amdt 1
Tail Rotor Swashplate Bearing Locknut - Increase in Torque AD/HU 269/66
Tailboom Centre Attachment Fitting Assembly - Inspection AD/HU 269/67 Amdt 2
Lower Pulley Bearings and Housings - Inspection AD/HU 269/68 Amdt 1
Alternator Circuit Protection - Modification AD/HU 269/69
Main Rotor Thrust Bearing P/N 269A5050-73 - Inspection AD/HU 269/70
Consolidation of Certain Early Airworthiness Directives - Older Model Hughes AD/HU 269/71
Idler Pulley Support Bracket - Inspection AD/HU 269/72
Main Gearbox Ring Gear - Inspection and Increase of Bolt Torque AD/HU 269/73
Belt Drive Pulley H-Frame Tie Bar Bracket - Inspection AD/HU 269/74
Tail Rotor Blade Root Bushing Holes and Retention Bolts - CANCELLED AD/HU 269/75 Amdt 2
Main Rotor Damper Pitch Bearing Case - Inspection and Modification AD/HU 269/76
Inertia Reel Shoulder Harness - Inspection AD/HU 269/77
Tail Rotor Pitch Control Link Assembly AD/HU 269/78
Main Rotor Drive Shaft AD/HU 269/79 Amdt 1
Throttle and Governor Control Cable Assemblies AD/HU 269/80
Main Transmission Assembly AD/HU 269/81
Main Rotor Blade Elastometric Dampers AD/HU 269/82 Amdt 1
Tail Rotor Fork Bolt AD/HU 269/83
Thrust Bearing Tube AD/HU 269/84
Tail Rotor Blade Abrasion Strip AD/HU 269/85 Amdt 2
Belt Drive Upper Pulley Assembly AD/HU 269/86
Tail Rotor Attachment Area AD/HU 269/87
Collective Pitch Mixer Bellcrank AD/HU 269/88
Droop Stop Nut AD/HU 269/89
Engine Lower Coupling Drive Shaft Boot - CANCELLED AD/HU 269/90 Amdt 1
Main Transmission Pinion Assembly AD/HU 269/91
Centre Frame Aft Cluster Fittings AD/HU 269/92
Tail Rotor Blade Spar AD/HU 269/93
Main Rotor Pitch Bearing Snap Ring Lockwasher AD/HU 269/94
Cyclic Pitch Control AD/HU 269/95
Throttle Cable Assembly AD/HU 269/96
Rotor Blades AD/HU 269/97
Tailboom Centre Attachment Fitting AD/HU 269/98
Main Rotor Drive Shaft Inspection AD/HU 269/99 Amdt 1
Clutch Control Spring AD/HU 269/100 Amdt 1
Throttle Control Linkage Restriction AD/HU 269/101
Cyclic Control Column AD/HU 269/102 Amdt 1
Lower Coupling Drive Shaft AD/HU 269/103
Rudder Pedal Bulkhead Gusset AD/HU 269/104
Tailboom Support Struts AD/HU 269/105
Main Transmission Pinion Assembly and Ring Gear AD/HU 269/106
Main Rotor Blade Abrasion Strip AD/HU 269/107
Main Rotor Blade Abrasion Strip AD/HU 269/108
Tail Rotor Swashplate Shaft Inspection AD/HU 269/109 Amdt 1
Tail Rotor Fork Bolt AD/HU 269/110 Amdt 1