CTHIn ForceLegislation
AD/S-PUMA/72 - Fuselage - TGB Attachment Fittings
Eurocopter AS 332 (Super Puma) Series HeEurocopter AS 332 (Super Puma) Series Helicopters
Start here
Get a plain-English read of Eurocopter AS 332 (Super Puma) Series He
Turn the raw legal text into a practical explanation grounded in AD/S-PUMA/72 - Fuselage - TGB Attachment Fittings.
Eurocopter AS 332 (Super Puma) Series Helicopters
| AD/S-PUMA/72 | Fuselage - TGB Attachment Fittings | 2/2008 DM |
|---|
| Applicability: | AS 332 C, C1, L, L1 and L2 helicopters with serial numbers below S/N 2680 and helicopters with serial numbers from S/N 9000 (inclusive) to S/N 9009 (inclusive), and equipped with tail gear box (TGB) attachment fittings, all part numbers. |
|---|---|
| Requirement: | Action in accordance with the technical requirements of French DGAC Airworthiness Directive (AD) UF-2007-027. |
| Compliance: | As specified in the requirements document with a revised effective date of the12 December 2007. |
| This Airworthiness Directive becomes effective on 12 December 2007. | |
| Background: | This AD follows the discovery of interference between the end of the threaded section of the TGB aft attachment bolt and the structure fitting during schedule maintenance check (750-hour inspection).The interference is due to a manufacturing anomaly of the fittings: the blind hole which provides clearance for the bolt in the structure fitting is missing. Such interference does not enable correct axial tightening of the TGB casing, even if the torque load applied to the attachment screw is correct.Insufficient tightening can cause damage to the TGB attachment and give rise to crack initiation under the head of the attachment bolt before the TBO of the TGB is reached. A crack can finally lead to the loss of the TGB and then involve the risk of losing the helicopter during take-off and landing phases. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
10 December 2007