CTHIn ForceLegislation
AD/S-92/3 - Main Gearbox Upper Housing
Sikorsky S-92 Series HelicoptersSikorsky S-92 Series Helicopters
Start here
Get a plain-English read of Sikorsky S-92 Series Helicopters
Turn the raw legal text into a practical explanation grounded in AD/S-92/3 - Main Gearbox Upper Housing.
Sikorsky S-92 Series Helicopters
| AD/S-92/3 | Main Gearbox Upper Housing | 2/2007 TX |
|---|
| Applicability: | Sikorsky Model S-92A helicopter, with main gearbox (MGB) upper main housing assembly (housing assembly), part number 92351-15110-042, installed. |
|---|---|
| Requirement: | Replace each MGB housing with 2700 or more hours time-in-service (TIS) with an airworthy MGB housing with less than 2700 hours TIS.Revise the Airworthiness Limitations section of the maintenance manual by establishing a new retirement life for the MGB housing assembly of 2700 hours TIS.Note: FAA AD 2006-15-19 Amdt 39-14700 dated 26 July 2006 refers. |
| Compliance: | Before further flight. |
| This Airworthiness Directive becomes effective on 18 December 2006. | |
| Background: | This action requires, before further flight, replacing a certain MGB upper main housing assembly (housing assembly) that has 2700 or more hours time-in-service (TIS) with an airworthy part. This action also requires, before further flight, revising the Airworthiness Limitations section (ALS) of the maintenance manual by establishing a new retirement life for the MGB housing assembly of 2700 hours TIS. This amendment is prompted by testing of the MGB housing assembly that resulted in premature fatigue failure due to a manufacturing process creating an oxide skin defect in the housing. The actions specified in this AD are intended to prevent fatigue failure of the MGB housing, loss of MGB lube oil, loss of main and tail rotor drive, and subsequent loss of control of the helicopter. |
Image unavailable in extracted text
James Coyne
Delegate of the Civil Aviation Safety Authority
13 December 2006