AD/PSN/1 - Blade and Hub - Inspection
1AD/PSN/1 - Blade and Hub - Inspection
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/PSN/1 - Blade and Hub - Inspection.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Propellers - Variable Pitch - Sensenich Series
AD/PSN/1 Blade and Hub - Inspection 8/84
Applicability: All controllable and constant speed propeller Models C-2FM, CS-2FM, C-3FR4, CS- 3FR5 and CS-3FM4.
Requirement: 1. Remove the propeller blades from the hub and carefully inspect the wood blade shank and split retaining groove in the blade ferrule for cracks, check and tighten the lag screws to 160 inch pounds.
- Magnetically inspect the ferrule and all ferrous parts of the hub. Special care should be given to the inspection for cracks originating in the hub ring groove; or
Sensenich SB No. 113, Rev. 1 and Rev. R9; or FAA AD 63-19-4.
Compliance: Propellers installed on Lycoming 0-235-C or 0-290-D series or Franklin 6A4-165-B3 engines - At intervals not exceeding 100 hours time in service. Propellers installed on engines not listed above - At intervals not exceeding 300 hours time in service.