Division Gulfstream Aerospace G1159, G-IV and GV - AD/G1159/21 Amdt 2 - Jumpseat Placard – Installation - Gulfstream Aerospace G1159, G-IV and GV Series Aeroplanes | Zoe

/

/

Division Gulfstream Aerospace G1159, G-IV and GV - AD/G1159/21 Amdt 2 - Jumpseat Placard – Installation - Gulfstream Aerospace G1159, G-IV and GV Series Aeroplanes | Zoe

Gulfstream Aerospace G1159, G-IV and GV Series Aeroplanes

AD/G1159/21 Amdt 2	Jumpseat Placard - Installation	19/2015

Applicability:	All Model G1159 aircraft.
Requirement:	To prevent injury to an occupant of any jumpseat located between fuselage stations 119 and 169, accomplish one of the following:1. Install a placard either on the bulkhead adjacent to the jumpseat or any equivalent location approved by the Civil Aviation Safety Authority, utilising a minimum of 3/16 in. (5 mm) high lettering with the wording “JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED”.2. Install the nose landing gear wheel-well bulkhead modification to eliminate drag strut penetration in accordance with GAAC Service change No. 226 Part 11.The placard described in paragraph 1 may be removed on the incorporation of the modification detailed in paragraph 2.
Compliance:	Within 10 hours time in service after 15 May 1978, unless already accomplished.
	The effective date of this AD is 18 September 2015.
Background:	This amendment clarifies the AD applicability as being only to the original G1159 model (G-II). The United States Federal Aviation Administration (FAA) issued the original foreign AD (FAA AD 77-13-01) on which this Australian AD is based.

Image unavailable in extracted text

Mike Higgins
Delegate of the Civil Aviation Safety Authority

7 September 2015