Gulfstream Aerospace G1159, G-IV and GV
Gulfstream Aerospace G1159, G-IV and GV Series Aeroplanes
Gulfstream Aerospace G1159, G-IV and GV Series Aeroplanes
| AD/G1159/21 Amdt 2 | Jumpseat Placard - Installation | 19/2015 |
|---|
| Applicability: | All Model G1159 aircraft. |
|---|---|
| Requirement: | To prevent injury to an occupant of any jumpseat located between fuselage stations 119 and 169, accomplish one of the following:1. Install a placard either on the bulkhead adjacent to the jumpseat or any equivalent location approved by the Civil Aviation Safety Authority, utilising a minimum of 3/16 in. (5 mm) high lettering with the wording “JUMPSEAT OCCUPANCY DURING TAXI, TAKEOFF OR LANDING PROHIBITED”.2. Install the nose landing gear wheel-well bulkhead modification to eliminate drag strut penetration in accordance with GAAC Service change No. 226 Part 11.The placard described in paragraph 1 may be removed on the incorporation of the modification detailed in paragraph 2. |
| Compliance: | Within 10 hours time in service after 15 May 1978, unless already accomplished. |
| The effective date of this AD is 18 September 2015. | |
| Background: | This amendment clarifies the AD applicability as being only to the original G1159 model (G-II). The United States Federal Aviation Administration (FAA) issued the original foreign AD (FAA AD 77-13-01) on which this Australian AD is based. |
View image in the official source
Mike Higgins
Delegate of the Civil Aviation Safety Authority
7 September 2015