CTHIn ForceLegislation
AD/FA-200/26 - Nose and Main Landing Gear Cylinder Assemblies
Fuji FA-200 Series AeroplanesFuji FA-200 Series Aeroplanes
Start here
Get a plain-English read of Fuji FA-200 Series Aeroplanes
Turn the raw legal text into a practical explanation grounded in AD/FA-200/26 - Nose and Main Landing Gear Cylinder Assemblies.
Fuji FA-200 Series Aeroplanes
| AD/FA-200/26 | Nose and Main LandingGear Cylinder Assemblies | 8/2009 |
|---|
| Applicability: | Model FA-200 aircraft. |
|---|---|
| Requirement: | Action in accordance with Fuji Heavy Industries Ltd Service Bulletin No. 200-013, dated 28 September 1999, or later JCAB approved revision.Note: JCAB AD TCD-5230-2000 refers. |
| Compliance: | Unless the Detail Instructions of the Requirement document have already been accomplished, within 3 Months after 30 July 2009. If the epoxy polyamide primer application required by paragraph 12-1(9) and 12-2(9) of the Requirement document has not been done, repeat the Detail Instructions of the Requirement document at intervals not to exceed 1,000 flight hours until the primer is applied. |
| This Airworthiness Directive becomes effective on 30 July 2009. | |
| Background: | The manufacturer received reports of corrosion on the inside surfaces of the nose and main landing gear cylinder assemblies. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
18 June 2009