Commonwealth legislation

AD/FA-200/26 - Nose and Main Landing Gear Cylinder Assemblies

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Airworthiness Directive requires owners/operators of Fuji FA-200 aeroplanes to carry out the actions in Fuji Heavy Industries Ltd Service Bulletin No. 200‑013 (28 Sept 1999 or later JCAB‑approved revision) to address corrosion inside nose and main landing‑gear cylinder assemblies. Compliance is within three months after 30 July 2009; if the epoxy polyamide primer in paragraphs 12‑1(9) and 12‑2(9) has not been applied, the required actions must be repeated at intervals not exceeding 1,000 flight hours until the primer is applied.

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/FA-200/26 - Nose and Main Landing Gear Cylinder Assemblies.

Fuji FA-200 Series Aeroplanes

AD/FA-200/26	Nose and Main LandingGear Cylinder Assemblies	8/2009

Applicability:	Model FA-200 aircraft.
Requirement:	Action in accordance with Fuji Heavy Industries Ltd Service Bulletin No. 200-013, dated 28 September 1999, or later JCAB approved revision.Note: JCAB AD TCD-5230-2000 refers.
Compliance:	Unless the Detail Instructions of the Requirement document have already been accomplished, within 3 Months after 30 July 2009. If the epoxy polyamide primer application required by paragraph 12-1(9) and 12-2(9) of the Requirement document has not been done, repeat the Detail Instructions of the Requirement document at intervals not to exceed 1,000 flight hours until the primer is applied.
	This Airworthiness Directive becomes effective on 30 July 2009.
Background:	The manufacturer received reports of corrosion on the inside surfaces of the nose and main landing gear cylinder assemblies.

View image in the official source
David Villiers
Delegate of the Civil Aviation Safety Authority

18 June 2009

AD/FA-200/26

Nose and Main LandingGear Cylinder Assem

Nose and Main LandingGear Cylinder Assemblies

Nose and Main Landing

Gear Cylinder Assemblies

8/2009

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

Fuji FA-200 Series Aeroplanes Fuji FA-200 Series Aeroplanes

Fuji FA-200 Series Aeroplanes

AD/FA-200/26	Nose and Main LandingGear Cylinder Assemblies	8/2009

Applicability:	Model FA-200 aircraft.
Requirement:	Action in accordance with Fuji Heavy Industries Ltd Service Bulletin No. 200-013, dated 28 September 1999, or later JCAB approved revision.Note: JCAB AD TCD-5230-2000 refers.
Compliance:	Unless the Detail Instructions of the Requirement document have already been accomplished, within 3 Months after 30 July 2009. If the epoxy polyamide primer application required by paragraph 12-1(9) and 12-2(9) of the Requirement document has not been done, repeat the Detail Instructions of the Requirement document at intervals not to exceed 1,000 flight hours until the primer is applied.
	This Airworthiness Directive becomes effective on 30 July 2009.
Background:	The manufacturer received reports of corrosion on the inside surfaces of the nose and main landing gear cylinder assemblies.

David Villiers
Delegate of the Civil Aviation Safety Authority

18 June 2009

AD/FA-200/26 AD/FA-200/26

AD/FA-200/26

Nose and Main LandingGear Cylinder Assem Nose and Main LandingGear Cylinder Assemblies

Nose and Main Landing

Gear Cylinder Assemblies

Deep dive

Current sections

Fuji FA-200 Series Aeroplanes

Fuji FA-200 Series Aeroplanes

AD/FA-200/26

AD/FA-200/26

Nose and Main LandingGear Cylinder Assemblies

Nose and Main Landing

8/2009

8/2009

Source text

Fuji FA-200 Series Aeroplanes Fuji FA-200 Series Aeroplanes

Fuji FA-200 Series Aeroplanes

AD/FA-200/26 AD/FA-200/26

AD/FA-200/26

Nose and Main LandingGear Cylinder Assem Nose and Main LandingGear Cylinder Assemblies

Nose and Main Landing

8/2009 8/2009

8/2009