CTHIn ForceLegislation
AD/F100/81 - Autopilot Disconnect Unit
Fokker F100 (F28 Mk 100) Series AeroplanFokker F100 (F28 Mk 100) Series Aeroplanes
Start here
Get a plain-English read of Fokker F100 (F28 Mk 100) Series Aeroplan
Turn the raw legal text into a practical explanation grounded in AD/F100/81 - Autopilot Disconnect Unit.
Fokker F100 (F28 Mk 100) Series Aeroplanes
| AD/F100/81 | Autopilot Disconnect Unit | 9/2006 |
|---|
| Applicability: | F28 Mark 0070 and 0100 aeroplanes. |
|---|---|
| Requirement: | Modify the aeroplane in accordance with Section 3 - Accomplishment Instructions of Fokker Service Bulletin SBF100-22-050 dated 25 April 2006 or later EASA approved revision. |
| Note: CAA-NL AD NL-2006-010 (EASA Approval 2006-0195) refers. | |
| Compliance: | Within 36 months after the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 31 August 2006. | |
| Background: | The Netherlands Civil Aviation Authority (CAA-NL) has advised that to date, there have been at least 10 reported events on Fokker 70 (F28 Mark 0070) and Fokker 100 (F28 Mark 0100) aircraft where the flight crew manually overpowered the autopilot, inadvertently neglecting to disengage the autopilot. |
| Detailed investigation of these incidents has shown that this usually occurs in a high workload environment that demands immediate manual control of the aircraft by the pilot flying, eg terrain warning. When the autopilot is not disengaged, the elevator servomotor is overpowered and the horizontal stabilizer is moved by the Automatic Flight Control & Augmentation System (AFCAS) auto-trim in a direction opposite to the (manual) deflection of the elevator, causing high elevator control forces. This condition, if not corrected, could cause the stabilizer to move to an extreme out-of-trim position, creating the (remote) possibility of loss of control of the aircraft, due to the extreme control loads. |
| In the original design of AFCAS, operation of the control wheel-mounted stabilizer trim switches has no effect when the autopilot is engaged. Based on the assumption that stabilizer trim switches will be operated by the pilot flying when encountering high control forces, an Autopilot Disconnect Unit (ADU) has been developed that disconnects the autopilot when the stabilizer trim switches are operated. Since a potentially unsafe condition has been identified that may exist or develop on aircraft of this type design, this Directive requires the installation of ADUs and associated wiring changes. |
|---|