CTHIn ForceLegislation
AD/F100/66 - Wing Rear Spar Lower Girder
//
© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
AD/F100/66 - Wing Rear Spar Lower Girder
Start here
Turn the raw legal text into a practical explanation grounded in AD/F100/66 - Wing Rear Spar Lower Girder.
| AD/F100/66 | Wing Rear Spar Lower Girder | 7/2005 |
|---|
| Applicability: | All Model F28 Mk 0070 and F28 Mk 0100 aircraft. |
|---|---|
| Requirement: | 1. Inspect the wing rear spar lower girder between STA 8700 and STA 9200, in accordance with Part 1 of Section 3 Accomplishment Instructions of Fokker Services Service Bulletin (SB) F100-57-038, dated 15 April 2005, or laterCAA-NL approved revision.2. If corrosion is found, remove the corrosion in accordance with Part 2 of Section 3 Accomplishment Instructions of SB F100-57-038, or later CAA-NL approved revision. Measure the damage and if the damage limits are not exceeded, the aircraft may be returned to service after restoration of the surface protection.3. If damage limits are exceeded, contact Fokker Services and repair in accordance with the repair advice as provided by Fokker Services.4. Irrespective of the results, report all findings to Fokker Services.Note: Netherlands CAA AD NL-2005-006 refers. |
| Compliance: | 1. At the next scheduled or unscheduled maintenance check within 4,000 flight hours after 7 July 2005, but not later than 15 April 2007.2. Before further flight.3. Before further flight.4. Within 7 days after the inspection. |
| This Airworthiness Directive becomes effective on 7 July 2005. |
| Background: | The Netherlands CAA received reports of corrosion of the wing spar lower girder between wing stations STA 8700 and STA 9200. Such corrosion, if undetected, could lead to deterioration of the structural strength of the wing rear spar. |
|---|
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
19 May 2005