AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification
1AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
Electrical Equipment
AD/ELECT/37
Amdt 2
JET Electronics and Technology Inc. Standby Power Supply - Modification
12/85
Applicability: All J.E.T. PS-823 Models.
Requirement: If the modification number listed below has been marked off then no further action is required in this part.
| JET Part No | Model | Modification No |
|---|---|---|
| 501-1075-01 | PS-823A | 18 |
| 501-1975-02 | PS-823B | 17 |
| 501-1075-03 | PS-823C | 15 |
| 501-1075-04 | PS-823D | 14 |
| 501-1075-05 | PS-823A/T | 21 |
| 501-1075-06 | PS-823B/T | 19 |
| 501-1075-07 | PS-823C/T | 17 |
| 501-1075-07 | PS-823D/T | 16 |
If the applicable modification number has not been marked off, install modifications in accordance with JET SB No. SB501-1075-16F.
Compliance: Within 100 hours time in service after 28 February 1981.
Background: Part 2 of this Directive is cancelled following reassessment after discussion with manufacturer, JET, who advised of factors not available at time of issue of Amendment 1.