Commonwealth legislation

AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

Requires operators of all J.E.T. PS-823 standby power supply models to confirm the listed modification number is marked off or to install the modification following JET Service Bulletin SB501-1075-16F. Applies to the JET part numbers in the table; compliance is required within 100 hours time in service after 28 February 1981. Part 2 of the earlier Directive was cancelled after reassessment with the manufacturer. Practically, aircraft owners/operators must arrange and pay for inspection or modification and retain evidence of compliance (Requirement; Compliance; Background).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification.

AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 107 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Electrical Equipment

AD/ELECT/37

Amdt 2

JET Electronics and Technology Inc. Standby Power Supply - Modification

12/85

Applicability: All J.E.T. PS-823 Models.

Requirement: If the modification number listed below has been marked off then no further action is required in this part.

JET Part No	Model	Modification No
501-1075-01	PS-823A	18
501-1975-02	PS-823B	17
501-1075-03	PS-823C	15
501-1075-04	PS-823D	14
501-1075-05	PS-823A/T	21
501-1075-06	PS-823B/T	19
501-1075-07	PS-823C/T	17
501-1075-07	PS-823D/T	16

If the applicable modification number has not been marked off, install modifications in accordance with JET SB No. SB501-1075-16F.

Compliance: Within 100 hours time in service after 28 February 1981.

Background: Part 2 of this Directive is cancelled following reassessment after discussion with manufacturer, JET, who advised of factors not available at time of issue of Amendment 1.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/ELECT/37 Amdt 2 - JET Electronics and Technology Inc. Standby Power Supply - Modification