Division DHC-6 (Twin Otter) Series Aeroplanes - AD/DHC-6/75 - Wing Front Spar Adapter Assembly - DHC-6 (Twin Otter) Series Aeroplanes

DHC-6 (Twin Otter) Series Aeroplanes

AD/DHC-6/75	Wing Front Spar Adapter Assembly	6/2008

Applicability:	Model DHC-6, all series aircraft, fitted with wing box part numbers C6W1002-1/-3 and subsequent or R.W. Martin, Inc (FAA STC No. SA00160LA or Canadian STC No. SA96-65) Re-Life Wing Box part number WR6-1002-59 or -61, incorporating a part number C6WM1027-1 or -3 Front Spar Adapter Assembly.
Requirement:	1. For wing boxes incorporating C6WM1027-1 front spar adapter assembly with 10 or more years of service:a. Incorporate Viking Service Bulletin (SB) 6/541 (installation of inspection holes in Lower Wing Assembly), dated 1 October 2007, or later Transport Canada approved revision; and then perform a visual inspection of front spar adapter assemblies in accordance with accomplishment instructions in SB 6/540 dated 1 October 2007, or later Transport Canada approved revision. For R.W. Martin Wing Box part numbers, perform the visual inspections in accordance with R.W. Martin SB 00160/2 Revision A, dated 15 November 2007, or later Transport Canada approved revision.b. If a cracked front spar adapter assembly is detected during any inspection, before further flight, replace the adapter assembly with a new adapter (part number C6WM1027-3) in accordance with Viking SB 6/542 dated1 October 2007, or later Transport Canada approved revision. For R.W. Martin Wing Box part numbers, contact R.W. Martin for replacement instructions.2. Incorporate task C57-10-18 of the DHC-6 Corrosion Prevention and Control Manual, PSM 1-6-5, into the Transport Canada approved maintenance schedule.Replacement of the front spar adapter assembly in accordance with Requirement 1.b., and the incorporation of the new task C57-10-18 into the Transport Canada approved maintenance schedule in accordance with Requirement 2, constitutes terminating action to this Directive.Note: Transport Canada AD CF-2007-31 refers.
Compliance:	1. Unless the initial requirement is already accomplished, within 180 days after 5 June 2008. Repeat the Requirement 1.a. visual inspection at intervals not to exceed 1,200 flight hours, 2,400 flight cycles, or 12 months, whichever occurs first.

Applicability:

Model DHC-6, all series aircraft, fitted with wing box part numbers C6W1002-1/-3 and subsequent or R.W. Martin, Inc (FAA STC No. SA00160LA or Canadian STC No. SA96-65) Re-Life Wing Box part number WR6-1002-59 or -61, incorporating a part number C6WM1027-1 or -3 Front Spar Adapter Assembly.

Requirement:

1. For wing boxes incorporating C6WM1027-1 front spar adapter assembly with 10 or more years of service:a. Incorporate Viking Service Bulletin (SB) 6/541 (installation of inspection holes in Lower Wing Assembly), dated 1 October 2007, or later Transport Canada approved revision; and then perform a visual inspection of front spar adapter assemblies in accordance with accomplishment instructions in SB 6/540 dated 1 October 2007, or later Transport Canada approved revision. For R.W. Martin Wing Box part numbers, perform the visual inspections in accordance with R.W. Martin SB 00160/2 Revision A, dated 15 November 2007, or later Transport Canada approved revision.b. If a cracked front spar adapter assembly is detected during any inspection, before further flight, replace the adapter assembly with a new adapter (part number C6WM1027-3) in accordance with Viking SB 6/542 dated1 October 2007, or later Transport Canada approved revision. For R.W. Martin Wing Box part numbers, contact R.W. Martin for replacement instructions.2. Incorporate task C57-10-18 of the DHC-6 Corrosion Prevention and Control Manual, PSM 1-6-5, into the Transport Canada approved maintenance schedule.Replacement of the front spar adapter assembly in accordance with Requirement 1.b., and the incorporation of the new task C57-10-18 into the Transport Canada approved maintenance schedule in accordance with Requirement 2, constitutes terminating action to this Directive.Note: Transport Canada AD CF-2007-31 refers.

Compliance:

1. Unless the initial requirement is already accomplished, within 180 days after 5 June 2008. Repeat the Requirement 1.a. visual inspection at intervals not to exceed 1,200 flight hours, 2,400 flight cycles, or 12 months, whichever occurs first.

	2. Unless already accomplished, within 90 days after 5 June 2008.

DHC-6 (Twin Otter) Series AeroplanesDHC-6 (Twin Otter) Series Aeroplanes

Get a plain-English read of DHC-6 (Twin Otter) Series Aeroplanes

DHC-6 (Twin Otter) Series Aeroplanes