CTHIn ForceLegislation
AD/BELL 427/6 - Disc Assemblies - Tail Rotor Driveshaft
Bell Helicopter Textron 427 Series HelicBell Helicopter Textron 427 Series Helicopters
Start here
Get a plain-English read of Bell Helicopter Textron 427 Series Helic
Turn the raw legal text into a practical explanation grounded in AD/BELL 427/6 - Disc Assemblies - Tail Rotor Driveshaft.
Bell Helicopter Textron 427 Series Helicopters
| AD/BELL 427/6 | Disc Assemblies - Tail Rotor Driveshaft | 12/2007 |
|---|
| Applicability: | Bell Helicopter Textron Canada (BHTC) Model 427 helicopters S/N up to 56056and 58001 through 58002, fitted with disc assemblies part number (P/N)407-340-340-103. |
|---|---|
| Requirement: | 1. Verify disc assemblies P/N 407-340-340-103 for manufacturing date, proper thickness and indexing, in accordance with the instructions provided in BHTC Alert Service Bulletin (ASB) ASB-427-07-17 dated 28 March 2007 or later approved revisions.If disc assemblies, after verification in accordance with Requirement 1, do not require any further action, or if the manufacturing date is not between 1 November 2005 and 30 November 2006, make an appropriate log book entry to this effect. No further action is required.2. Remove any disc assembly which is not within the required thickness of 0.115 - 0.127 inch (2.921 - 3.225 mm).3. Remove any disc assembly which is not properly indexed.4. Do not install any disc assembly P/N 407-340-340-103 into any helicopter unless it is compliant to the ASB-427-07-17 dated 28 March 2007 or later approved revisions.Note: Transport Canada Airworthiness Directive CF-2007-14 dated 24 August 2007 refers. |
| Compliance: | 1. Unless already accomplished, no later than 25 flight hours or 30 days from the effective date of this directive, whichever comes first.2. Within 10 flight hours, after the completion of requirement 1.3. Within 300 flight hours or at next scheduled inspection, whichever comes first, after the completion of requirement 1.4. After the effective date of this Airworthiness Directive. |
| This Airworthiness Directive becomes effective on 22 November 2007. |
| Background: | Transport Canada has determined that disc assemblies part number (P/N)407-340-340-103 manufactured between 1 November 2005 and 30 November 2006, may have discs of improper thickness or discs may have been indexed incorrectly. |
|---|
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
28 September 2007