Commonwealth legislation

AD/BEECH 1900/19 - Under Torqued Propeller Mounting Bolts

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This airworthiness directive requires operators of certain Beechcraft 1900D aircraft (specified serial numbers) that have not had the propeller removed/re‑installed or the propeller bolts re‑torqued to check propeller mounting bolt torque per Raytheon's urgent action letter. Bolts measuring under 60 ft‑lbs must be replaced; bolts at or above 60 ft‑lbs must be re‑torqued to the manufacturer’s procedure. (Requirement)

Operators bear inspection and repair costs and must comply within 50 flight hours of the effective date; the action responds to reports of under‑torqued bolts that could fatigue and cause propeller loss. (Compliance; Background)

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in AD/BEECH 1900/19 - Under Torqued Propeller Mounting Bolts.

AD/BEECH 1900/19 - Under Torqued Propeller Mounting Bolts

COMMONWEALTH OF AUSTRALIA (Civil Aviation Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY

SCHEDULE OF AIRWORTHINESS DIRECTIVES

View image in the official source
Beechcraft 1900 Series Aeroplanes

AD/BEECH 1900/19 Under Torqued Propeller Mounting Bolts 12/97

Applicability: Model 1900D aircraft (serial numbers UE176 through UE280, UE282 and UE284, that have not had the propeller removed and re-installed since factory installation or have not had the propeller attachment bolts re-torqued.

Requirement: For applicable aircraft, the propeller mounting bolts are to be checked for correct torque figures in accordance with Raytheon urgent action letter number 52-0092, dated 22 July 1997. Mounting bolts with a torque setting of less than 60ft-lbs are to be replaced before further flight. Mounting bolts with torque settings of 60ft-lbs or greater are to be re-torqued in accordance with manufacturer’s procedures.

Note: FAA AD 97-17-08 amendment 39-10111 refers.

Compliance: Compliance with this directive is required within the next 50 hours time in service (TIS) following the effective date of issue of this directive.

The effective date of issue of this directive is 24 September 1997.

Background: The FAA has received reports that certain Raytheon model 1900D airplanes were inadvertently installed with under-torqued propeller mounting bolts. Three reports to date have discovered torque settings of 60ft-lbs or less which could lead to fatigue cracking of the bolts and possible loss of a propeller.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

1 AD/BEECH 1900/19 - Under Torqued Propeller Mounting Bolts