AD/B727/191 - Main Landing Gear Forward Trunnion Attach Fittings
1AD/B727/191 - Main Landing Gear Forward Trunnion Attach Fittings
Start here
Get a plain-English read of 1
Turn the raw legal text into a practical explanation grounded in AD/B727/191 - Main Landing Gear Forward Trunnion Attach Fittings.
COMMONWEALTH OF AUSTRALIA (Civil Aviation Safety Regulations 1998), PART 39 - 105 CIVIL AVIATION SAFETY AUTHORITY
SCHEDULE OF AIRWORTHINESS DIRECTIVES
Image unavailable in extracted text
AIRWORTHINESS DIRECTIVE
Image unavailable in extracted text
For the reasons set out in the background section, the CASA delegate whose signature appears below issues the following Airworthiness Directive (AD) under subregulation 39.1 (1) of CASR 1998. The AD requires that the action set out in the requirement section (being action that the delegate considers necessary to correct the unsafe condition) be taken in relation to the aircraft or aeronautical product mentioned in the applicability section: (a) in the circumstances mentioned in the requirement section; and (b) in accordance with the instructions set out in the requirement section; and (c) at the time mentioned in the compliance section.
Image unavailable in extracted text
Boeing 727 Series Aeroplanes
AD/B727/191 Main Landing Gear Forward Trunnion Attach
Fittings
12/2004
Applicability: Model 727, 727C, 727-100, -100C, and -200 series aircraft, line numbers 1 through 887.
Requirement: Action in accordance with the technical requirements of FAA AD 2004-18-08 Amdt 39-13786.
Note: Boeing Alert Service Bulletin 727-57A0132 Revision 3, or a later FAA approved revision, refer.
Compliance: As specified in the Requirement document, with a revised effective date of 25 November 2004.
This Airworthiness Directive becomes effective on 25 November 2004.
Background: The manufacturer received reports of cracks and corrosion in the attach bolt holes in the main landing gear forward trunnion attach fittings on thirty-two aircraft.
Investigation revealed the cracks were caused by stress corrosion. Failure of the main landing gear forward trunnion attach fittings could result in collapse of the landing gear.
Signature of David Villiers, Delegate of the Civil Aviation Safety Authority.
David Villiers
Delegate of the Civil Aviation Safety Authority 14 October 2004
Image unavailable in extracted text
The above AD is notified in the Commonwealth of Australia Gazette on 3 November 2004.
Page 1 of 1