CTHIn ForceLegislation
AD/750XL/6 - Centre Console Wiring Loom
Pacific Aerospace 750XL Series AeroplanePacific Aerospace 750XL Series Aeroplanes
Start here
Get a plain-English read of Pacific Aerospace 750XL Series Aeroplane
Turn the raw legal text into a practical explanation grounded in AD/750XL/6 - Centre Console Wiring Loom.
Pacific Aerospace 750XL Series Aeroplanes
| AD/750XL/6 | Centre Console Wiring Loom | 2/2006 TX |
|---|
| Applicability: | Model 750XL aeroplanes serial numbers 110 to 120 inclusive. |
|---|---|
| Requirement: | If not previously accomplished, inspect and modify the insulation on the wiring looms within the cockpit centre console in accordance with Pacific Aerospace Corporation Service Bulletin PACSB/XL/016 Issue 1 dated 23 September 2005. |
| Note: CAA(NZ) AD DAC/750XL/6 refers. | |
| Compliance: | Within ten hours time in service after the effective date of this Directive. |
| This Airworthiness Directive becomes effective on 9 December 2005. | |
| Background: | An in-services electrical short circuit has been reported to the New Zealand Civil Aviation Authority, involving abrasion of the wiring insulation against the fasteners of the plug back-shells on the wiring loom located in the cockpit centre console. |
| This Directive requires an inspection of the wiring loom together with the installation of additional mechanical protection for the wiring and tie-wraps securing the looms away from the back-shells of the plugs. |
Image unavailable in extracted text
David Villiers
Delegate of the Civil Aviation Safety Authority
9 December 2005