© 2026 Zoe. All rights reserved.
Zoe is a legal information platform. Always consult the Federal Register of Legislation for authoritative text.
Commonwealth legislation
This Act has been repealed and is no longer in force. It is retained for historical reference.
This Standard tells Australian entities how to measure fair value — the exit price in an orderly market between knowledgeable, willing participants — whenever another accounting rule requires or permits fair‑value measurement. It applies to entities preparing general purpose financial statements, with some relief for smaller reporters.
It requires valuation techniques that prioritise observable market data, reflects entity credit risk for liabilities, and demands detailed disclosures (especially where unobservable inputs are used) so users see current market‑based values.
Want the full deep dive?
Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.
Direct links to the current provisions in AASB 13 - Fair Value Measurement - September 2011.
Compiled versions of Standards, original Standards and amending Standards (see Compilation Details) are available on the AASB website: www.aasb.gov.au.
| Australian Accounting Standards BoardPO Box 204Collins Street WestVictoria 8007AUSTRALIA | |
|---|---|
| Phone: (03) 9617 7637E-mail: publications@aasb.gov.auWebsite: www.aasb.gov.au |
Phone: (03) 9617 7600
E-mail: standard@aasb.gov.au
COPYRIGHT
© 2016 Commonwealth of Australia
This compiled AASB Standard contains IFRS Foundation copyright material. Reproduction within Australia in unaltered form (retaining this notice) is permitted for personal and non-commercial use subject to the inclusion of an acknowledgment of the source. Requests and enquiries concerning reproduction and rights for commercial purposes within Australia should be addressed to The Director of Finance and Administration, Australian Accounting Standards Board, PO Box 204, Collins Street West, Victoria 8007.
All existing rights in this material are reserved outside Australia.
Reproduction outside Australia in unaltered form (retaining this notice) is permitted for personal and non-commercial use only. Further information and requests for authorisation to reproduce for commercial purposes outside Australia should be addressed to the IFRS Foundation at www.ifrs.org.
COMPILATION DETAILS
Comparison with IFRS 13
INTRODUCTION TO IFRS 13
(available on the AASB website)
Accounting Standard
AASB 13 Fair Value Measurement
Paragraphs
Objective 1 – 4
Application Aus4.1 – Aus4.3
Reduced disclosure requirements Aus4.5 – Aus4.6
Scope 5 – 8
Measurement
Definition of fair value 9 – 10
The asset or liability 11 – 14
The transaction 15 – 21
Market participants 22 – 23
The price 24 – 26
Application to non-financial assets
Highest and best use for non-financial assets 27 – 30
Valuation premise for non-financial assets 31 – 33
Application to liabilities and an entity’s own equity instruments
General principles 34 – 36
Liabilities and equity instruments held by other parties as assets 37 – 39
Liabilities and equity instruments not held by other parties as assets 40 – 41
Non-performance risk 42 – 44
Restriction preventing the transfer of a liability or an entity’s own equity instrument 45 – 46
Financial liability with a demand feature 47
Application to financial assets and financial liabilities with offsetting positions in market risks or counterparty credit risk 48 – 52
Exposure to market risks 53 – 55
Exposure to the credit risk of a particular counterparty 56
Fair value at initial recognition 57 – 60
Valuation techniques 61 – 66
Inputs to valuation techniques
General principles 67 – 69
Inputs based on bid and ask prices 70 – 71
Fair value hierarchy 72 – 75
Level 1 inputs 76 – 80
Level 2 inputs 81 – 85
Level 3 inputs 86 – 90
Disclosure 91 – 99
Appendices:
A. Defined Terms Page 20
B. Application Guidance Page 22
C. Effective Date and Transition Page 32
DELETED IFRS 13 TEXT Page 33
ILLUSTRATIVE EXAMPLES
(available on the AASB website)
BASIS FOR CONCLUSIONS ON IFRS 13
(available on the AASB website)
Australian Accounting Standard AASB 13 Fair Value Measurement (as amended) is set out in paragraphs 1 – 99 and Appendices A – C. All the paragraphs have equal authority. Paragraphs in bold type state the main principles. Terms defined in Appendix A are in italics the first time they appear in the Standard. AASB 13 is to be read in the context of other Australian Accounting Standards, including AASB 1048 Interpretation of Standards, which identifies the Australian Accounting Interpretations. In the absence of explicit guidance, AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors provides a basis for selecting and applying accounting policies.
This compiled Standard applies to annual reporting periods beginning on or after 1 January 2018. It takes into account amendments up to and including 8 July 2015 and was prepared on 6 June 2016 by the staff of the Australian Accounting Standards Board (AASB).
This compilation is not a separate Accounting Standard made by the AASB. Instead, it is a representation of AASB 13 (September 2011) as amended by other Accounting Standards, which are listed in the Table below.
| Standard | Date made | Application date(annual reporting periods … on or after …) | Application, saving or transitional provisions |
|---|---|---|---|
| AASB 13 | 2 Sep 2011 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2012-1 | 21 Mar 2012 | (beginning) 1 Jul 2013 | see (b) below |
| AASB 2012-10 | 18 Dec 2012 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2014-1 | 4 Jun 2014 | Pt A (beginning) 1 Jul 2014Pt C (beginning) 1 Jul 2014 | see (c) belowsee (d) below |
| AASB 2014-7 | 17 Dec 2014 | (beginning) 1 Jan 2018 | see (e) below |
| AASB 2015-7 | 8 July 2015 | (beginning) 1 Jul 2016 | see (f) below |
(a) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013.
(b) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 July 2009 but before 1 July 2013, provided that AASB 1053 Application of Tiers of Australian Accounting Standards, AASB 13 Fair Value Measurement and AASB 2011-8 Amendments to Australian Accounting Standards arising from AASB 13 are also applied to such periods.
(c) Entities may elect to apply Part A of this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2014.
(d) Entities may elect to apply Part C of this Standard to annual reporting periods beginning on or after 1 January 2014 but before 1 July 2014.
(e) Entities may elect to apply this Standard to annual reporting periods beginning on or after 24 July 2014 but before 1 January 2018, provided that AASB 9 Financial Instruments (2014) is also applied to such periods.
(f) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2016.
| Paragraph affected | How affected | By … [paragraph] |
|---|---|---|
| Aus4.4 | deleted | AASB 2014-1C [49, 50] |
| Aus4.5-Aus4.6 (and preceding heading) | added | AASB 2012-1 [8] |
| 27 | amended | AASB 2014-1A [35] |
| 48 | amended | AASB 2012-10 [43] |
| 52 | amendedamended | AASB 2014-1A [23]AASB 2014-7 [34] |
| Aus93.1 | added | AASB 2015-7 [5] |
| B13 | amended | AASB 2014-1A [35] |
| B31 | amended | AASB 2014-1A [35] |
| C4 | added | AASB 2014-1A [23] |
| C5 | added | AASB 2014-7 [34] |
This compiled Standard applies to annual reporting periods beginning on or after 1 January 2018. It takes into account amendments up to and including 8 July 2015 and was prepared on 6 June 2016 by the staff of the Australian Accounting Standards Board (AASB).
This compilation is not a separate Accounting Standard made by the AASB. Instead, it is a representation of AASB 13 (September 2011) as amended by other Accounting Standards, which are listed in the Table below.
| Standard | Date made | Application date(annual reporting periods … on or after …) | Application, saving or transitional provisions |
|---|---|---|---|
| AASB 13 | 2 Sep 2011 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2012-1 | 21 Mar 2012 | (beginning) 1 Jul 2013 | see (b) below |
| AASB 2012-10 | 18 Dec 2012 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2014-1 | 4 Jun 2014 | Pt A (beginning) 1 Jul 2014Pt C (beginning) 1 Jul 2014 | see (c) belowsee (d) below |
| AASB 2014-7 | 17 Dec 2014 | (beginning) 1 Jan 2018 | see (e) below |
| AASB 2015-7 | 8 July 2015 | (beginning) 1 Jul 2016 | see (f) below |
(a) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013.
(b) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 July 2009 but before 1 July 2013, provided that AASB 1053 Application of Tiers of Australian Accounting Standards, AASB 13 Fair Value Measurement and AASB 2011-8 Amendments to Australian Accounting Standards arising from AASB 13 are also applied to such periods.
(c) Entities may elect to apply Part A of this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2014.
(d) Entities may elect to apply Part C of this Standard to annual reporting periods beginning on or after 1 January 2014 but before 1 July 2014.
(e) Entities may elect to apply this Standard to annual reporting periods beginning on or after 24 July 2014 but before 1 January 2018, provided that AASB 9 Financial Instruments (2014) is also applied to such periods.
(f) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2016.
| Paragraph affected | How affected | By … [paragraph] |
|---|---|---|
| Aus4.4 | deleted | AASB 2014-1C [49, 50] |
| Aus4.5-Aus4.6 (and preceding heading) | added | AASB 2012-1 [8] |
| 27 | amended | AASB 2014-1A [35] |
| 48 | amended | AASB 2012-10 [43] |
| 52 | amendedamended | AASB 2014-1A [23]AASB 2014-7 [34] |
| Aus93.1 | added | AASB 2015-7 [5] |
| B13 | amended | AASB 2014-1A [35] |
| B31 | amended | AASB 2014-1A [35] |
| C4 | added | AASB 2014-1A [23] |
| C5 | added | AASB 2014-7 [34] |
AASB 13 Fair Value Measurement as amended incorporates IFRS 13 Fair Value Measurement as issued and amended by the International Accounting Standards Board (IASB). Paragraphs that have been added to this Standard (and do not appear in the text of IFRS 13) are identified with the prefix “Aus”, followed by the number of the preceding IASB paragraph and decimal numbering.
Entities that comply with AASB 13 as amended will simultaneously be in compliance with IFRS 13 as amended, with the exception of entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements.
The Australian Accounting Standards Board made Accounting Standard AASB 13 Fair Value Measurement under section 334 of the Corporations Act 2001 on 2 September 2011.
This compiled version of AASB 13 applies to annual reporting periods beginning on or after 1 January 2018. It incorporates relevant amendments contained in other AASB Standards made by the AASB up to and including 8 July 2015 (see Compilation Details).
1 This Standard:
(a) defines fair value;
(b) sets out in a single Standard a framework for measuring fair value; and
(c) requires disclosures about fair value measurements.
2 Fair value is a market-based measurement, not an entity-specific measurement. For some assets and liabilities, observable market transactions or market information might be available. For other assets and liabilities, observable market transactions and market information might not be available. However, the objective of a fair value measurement in both cases is the same – to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions (ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability).
3 When a price for an identical asset or liability is not observable, an entity measures fair value using another valuation technique that maximises the use of relevant observable inputs and minimises the use of unobservable inputs. Because fair value is a market-based measurement, it is measured using the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk. As a result, an entity’s intention to hold an asset or to settle or otherwise fulfil a liability is not relevant when measuring fair value.
4 The definition of fair value focuses on assets and liabilities because they are a primary subject of accounting measurement. In addition, this Standard shall be applied to an entity’s own equity instruments measured at fair value.
Aus4.1 This Standard applies to:
(a) each entity that is required to prepare financial reports in accordance with Part 2M.3 of the Corporations Act and that is a reporting entity;
(b) general purpose financial statements of each other reporting entity; and
(c) financial statements that are, or are held out to be, general purpose financial statements.
Aus4.2 This Standard applies to annual reporting periods beginning on or after 1 January 2013.
[Note: For application dates of paragraphs changed or added by an amending Standard, see Compilation Details.]
Aus4.3 This Standard may be applied to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013. If an entity applies this Standard to such an annual reporting period, it shall disclose that fact.
Aus4.4 [Deleted by the AASB]
Aus4.5 The text “both of” in the lead in of paragraph 91 and paragraphs 91(b), 93(b)–(i), 95 and 97–99 of this Standard do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements. Entities applying Australian Accounting Standards – Reduced Disclosure Requirements may elect to comply with some or all of these excluded requirements.
Aus4.6 The requirements that do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements are identified in this Standard by shading of the relevant text.
5 This Standard applies when another Standard requires or permits fair value measurements or disclosures about fair value measurements (and measurements, such as fair value less costs to sell, based on fair value or disclosures about those measurements), except as specified in paragraphs 6 and 7.
6 The measurement and disclosure requirements of this Standard do not apply to the following:
(a) share-based payment transactions within the scope of AASB 2 Share-based Payment;
(b) leasing transactions within the scope of AASB 117 Leases; and
(c) measurements that have some similarities to fair value but are not fair value, such as net realisable value in AASB 102 Inventories or value in use in AASB 136 Impairment of Assets.
7 The disclosures required by this Standard are not required for the following:
(a) plan assets measured at fair value in accordance with AASB 119 Employee Benefits; and
(b) [deleted by the AASB]
(c) assets for which recoverable amount is fair value less costs of disposal in accordance with AASB 136.
8 The fair value measurement framework described in this Standard applies to both initial and subsequent measurement if fair value is required or permitted by other Australian Accounting Standards.
The Australian Accounting Standards Board made Accounting Standard AASB 13 Fair Value Measurement under section 334 of the Corporations Act 2001 on 2 September 2011.
This compiled version of AASB 13 applies to annual reporting periods beginning on or after 1 January 2018. It incorporates relevant amendments contained in other AASB Standards made by the AASB up to and including 8 July 2015 (see Compilation Details).
Fair Value Measurement
1 This Standard:
(a) defines fair value;
(b) sets out in a single Standard a framework for measuring fair value; and
(c) requires disclosures about fair value measurements.
2 Fair value is a market-based measurement, not an entity-specific measurement. For some assets and liabilities, observable market transactions or market information might be available. For other assets and liabilities, observable market transactions and market information might not be available. However, the objective of a fair value measurement in both cases is the same – to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions (ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability).
3 When a price for an identical asset or liability is not observable, an entity measures fair value using another valuation technique that maximises the use of relevant observable inputs and minimises the use of unobservable inputs. Because fair value is a market-based measurement, it is measured using the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk. As a result, an entity’s intention to hold an asset or to settle or otherwise fulfil a liability is not relevant when measuring fair value.
4 The definition of fair value focuses on assets and liabilities because they are a primary subject of accounting measurement. In addition, this Standard shall be applied to an entity’s own equity instruments measured at fair value.
Aus4.1 This Standard applies to:
(a) each entity that is required to prepare financial reports in accordance with Part 2M.3 of the Corporations Act and that is a reporting entity;
(b) general purpose financial statements of each other reporting entity; and
(c) financial statements that are, or are held out to be, general purpose financial statements.
Aus4.2 This Standard applies to annual reporting periods beginning on or after 1 January 2013.
[Note: For application dates of paragraphs changed or added by an amending Standard, see Compilation Details.]
Aus4.3 This Standard may be applied to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013. If an entity applies this Standard to such an annual reporting period, it shall disclose that fact.
Aus4.4 [Deleted by the AASB]
Aus4.5 The text “both of” in the lead in of paragraph 91 and paragraphs 91(b), 93(b)–(i), 95 and 97–99 of this Standard do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements. Entities applying Australian Accounting Standards – Reduced Disclosure Requirements may elect to comply with some or all of these excluded requirements.
Aus4.6 The requirements that do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements are identified in this Standard by shading of the relevant text.
5 This Standard applies when another Standard requires or permits fair value measurements or disclosures about fair value measurements (and measurements, such as fair value less costs to sell, based on fair value or disclosures about those measurements), except as specified in paragraphs 6 and 7.
6 The measurement and disclosure requirements of this Standard do not apply to the following:
(a) share-based payment transactions within the scope of AASB 2 Share-based Payment;
(b) leasing transactions within the scope of AASB 117 Leases; and
(c) measurements that have some similarities to fair value but are not fair value, such as net realisable value in AASB 102 Inventories or value in use in AASB 136 Impairment of Assets.
7 The disclosures required by this Standard are not required for the following:
(a) plan assets measured at fair value in accordance with AASB 119 Employee Benefits; and
(b) [deleted by the AASB]
(c) assets for which recoverable amount is fair value less costs of disposal in accordance with AASB 136.
8 The fair value measurement framework described in this Standard applies to both initial and subsequent measurement if fair value is required or permitted by other Australian Accounting Standards.
9 This Standard defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.
10 Paragraph B2 describes the overall fair value measurement approach.
11 A fair value measurement is for a particular asset or liability. Therefore, when measuring fair value an entity shall take into account the characteristics of the asset or liability if market participants would take those characteristics into account when pricing the asset or liability at the measurement date. Such characteristics include, for example, the following:
(a) the condition and location of the asset; and
(b) restrictions, if any, on the sale or use of the asset.
12 The effect on the measurement arising from a particular characteristic will differ depending on how that characteristic would be taken into account by market participants.
13 The asset or liability measured at fair value might be either of the following:
(a) a stand-alone asset or liability (eg a financial instrument or a non-financial asset); or
(b) a group of assets, a group of liabilities or a group of assets and liabilities (eg a cash-generating unit or a business).
14 Whether the asset or liability is a stand-alone asset or liability, a group of assets, a group of liabilities or a group of assets and liabilities for recognition or disclosure purposes depends on its unit of account. The unit of account for the asset or liability shall be determined in accordance with the Standard that requires or permits the fair value measurement, except as provided in this Standard.
15 A fair value measurement assumes that the asset or liability is exchanged in an orderly transaction between market participants to sell the asset or transfer the liability at the measurement date under current market conditions.
16 A fair value measurement assumes that the transaction to sell the asset or transfer the liability takes place either:
(a) in the principal market for the asset or liability; or
(b) in the absence of a principal market, in the most advantageous market for the asset or liability.
17 An entity need not undertake an exhaustive search of all possible markets to identify the principal market or, in the absence of a principal market, the most advantageous market, but it shall take into account all information that is reasonably available. In the absence of evidence to the contrary, the market in which the entity would normally enter into a transaction to sell the asset or to transfer the liability is presumed to be the principal market or, in the absence of a principal market, the most advantageous market.
18 If there is a principal market for the asset or liability, the fair value measurement shall represent the price in that market (whether that price is directly observable or estimated using another valuation technique), even if the price in a different market is potentially more advantageous at the measurement date.
19 The entity must have access to the principal (or most advantageous) market at the measurement date. Because different entities (and businesses within those entities) with different activities may have access to different markets, the principal (or most advantageous) market for the same asset or liability might be different for different entities (and businesses within those entities). Therefore, the principal (or most advantageous) market (and thus, market participants) shall be considered from the perspective of the entity, thereby allowing for differences between and among entities with different activities.
20 Although an entity must be able to access the market, the entity does not need to be able to sell the particular asset or transfer the particular liability on the measurement date to be able to measure fair value on the basis of the price in that market.
21 Even when there is no observable market to provide pricing information about the sale of an asset or the transfer of a liability at the measurement date, a fair value measurement shall assume that a transaction takes place at that date, considered from the perspective of a market participant that holds the asset or owes the liability. That assumed transaction establishes a basis for estimating the price to sell the asset or to transfer the liability.
22 An entity shall measure the fair value of an asset or a liability using the assumptions that market participants would use when pricing the asset or liability, assuming that market participants act in their economic best interest.
23 In developing those assumptions, an entity need not identify specific market participants. Rather, the entity shall identify characteristics that distinguish market participants generally, considering factors specific to all the following:
(a) the asset or liability;
(b) the principal (or most advantageous) market for the asset or liability; and
(c) market participants with whom the entity would enter into a transaction in that market.
24 Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction in the principal (or most advantageous) market at the measurement date under current market conditions (ie an exit price) regardless of whether that price is directly observable or estimated using another valuation technique.
25 The price in the principal (or most advantageous) market used to measure the fair value of the asset or liability shall not be adjusted for transaction costs. Transaction costs shall be accounted for in accordance with other Australian Accounting Standards. Transaction costs are not a characteristic of an asset or a liability; rather, they are specific to a transaction and will differ depending on how an entity enters into a transaction for the asset or liability.
26 Transaction costs do not include transport costs. If location is a characteristic of the asset (as might be the case, for example, for a commodity), the price in the principal (or most advantageous) market shall be adjusted for the costs, if any, that would be incurred to transport the asset from its current location to that market.
27 A fair value measurement of a non-financial asset takes into account a market participant’s ability to generate economic benefits by using the asset in its highest and best use or by selling it to another market participant that would use the asset in its highest and best use.
28 The highest and best use of a non-financial asset takes into account the use of the asset that is physically possible, legally permissible and financially feasible, as follows:
(a) A use that is physically possible takes into account the physical characteristics of the asset that market participants would take into account when pricing the asset (eg the location or size of a property).
(b) A use that is legally permissible takes into account any legal restrictions on the use of the asset that market participants would take into account when pricing the asset (eg the zoning regulations applicable to a property).
(c) A use that is financially feasible takes into account whether a use of the asset that is physically possible and legally permissible generates adequate income or cash flows (taking into account the costs of converting the asset to that use) to produce an investment return that market participants would require from an investment in that asset put to that use.
29 Highest and best use is determined from the perspective of market participants, even if the entity intends a different use. However, an entity’s current use of a non-financial asset is presumed to be its highest and best use unless market or other factors suggest that a different use by market participants would maximise the value of the asset.
30 To protect its competitive position, or for other reasons, an entity may intend not to use an acquired non-financial asset actively or it may intend not to use the asset according to its highest and best use. For example, that might be the case for an acquired intangible asset that the entity plans to use defensively by preventing others from using it. Nevertheless, the entity shall measure the fair value of a non-financial asset assuming its highest and best use by market participants.
31 The highest and best use of a non-financial asset establishes the valuation premise used to measure the fair value of the asset, as follows:
(a) The highest and best use of a non-financial asset might provide maximum value to market participants through its use in combination with other assets as a group (as installed or otherwise configured for use) or in combination with other assets and liabilities (eg a business).
(i) If the highest and best use of the asset is to use the asset in combination with other assets or with other assets and liabilities, the fair value of the asset is the price that would be received in a current transaction to sell the asset assuming that the asset would be used with other assets or with other assets and liabilities and that those assets and liabilities (ie its complementary assets and the associated liabilities) would be available to market participants.
(ii) Liabilities associated with the asset and with the complementary assets include liabilities that fund working capital, but do not include liabilities used to fund assets other than those within the group of assets.
(iii) Assumptions about the highest and best use of a non-financial asset shall be consistent for all the assets (for which highest and best use is relevant) of the group of assets or the group of assets and liabilities within which the asset would be used.
(b) The highest and best use of a non-financial asset might provide maximum value to market participants on a stand-alone basis. If the highest and best use of the asset is to use it on a stand-alone basis, the fair value of the asset is the price that would be received in a current transaction to sell the asset to market participants that would use the asset on a stand-alone basis.
32 The fair value measurement of a non-financial asset assumes that the asset is sold consistently with the unit of account specified in other Australian Accounting Standards (which may be an individual asset). That is the case even when that fair value measurement assumes that the highest and best use of the asset is to use it in combination with other assets or with other assets and liabilities because a fair value measurement assumes that the market participant already holds the complementary assets and the associated liabilities.
33 Paragraph B3 describes the application of the valuation premise concept for non-financial assets.
34 A fair value measurement assumes that a financial or non-financial liability or an entity’s own equity instrument (eg equity interests issued as consideration in a business combination) is transferred to a market participant at the measurement date. The transfer of a liability or an entity’s own equity instrument assumes the following:
(a) A liability would remain outstanding and the market participant transferee would be required to fulfil the obligation. The liability would not be settled with the counterparty or otherwise extinguished on the measurement date.
(b) An entity’s own equity instrument would remain outstanding and the market participant transferee would take on the rights and responsibilities associated with the instrument. The instrument would not be cancelled or otherwise extinguished on the measurement date.
35 Even when there is no observable market to provide pricing information about the transfer of a liability or an entity’s own equity instrument (eg because contractual or other legal restrictions prevent the transfer of such items), there might be an observable market for such items if they are held by other parties as assets (eg a corporate bond or a call option on an entity’s shares).
36 In all cases, an entity shall maximise the use of relevant observable inputs and minimise the use of unobservable inputs to meet the objective of a fair value measurement, which is to estimate the price at which an orderly transaction to transfer the liability or equity instrument would take place between market participants at the measurement date under current market conditions.
37 When a quoted price for the transfer of an identical or a similar liability or entity’s own equity instrument is not available and the identical item is held by another party as an asset, an entity shall measure the fair value of the liability or equity instrument from the perspective of a market participant that holds the identical item as an asset at the measurement date.
38 In such cases, an entity shall measure the fair value of the liability or equity instrument as follows:
(a) using the quoted price in an active market for the identical item held by another party as an asset, if that price is available.
(b) if that price is not available, using other observable inputs, such as the quoted price in a market that is not active for the identical item held by another party as an asset.
(c) if the observable prices in (a) and (b) are not available, using another valuation technique, such as:
(i) an income approach (eg a present value technique that takes into account the future cash flows that a market participant would expect to receive from holding the liability or equity instrument as an asset; see paragraphs B10 and B11).
(ii) a market approach (eg using quoted prices for similar liabilities or equity instruments held by other parties as assets; see paragraphs B5–B7).
39 An entity shall adjust the quoted price of a liability or an entity’s own equity instrument held by another party as an asset only if there are factors specific to the asset that are not applicable to the fair value measurement of the liability or equity instrument. An entity shall ensure that the price of the asset does not reflect the effect of a restriction preventing the sale of that asset. Some factors that may indicate that the quoted price of the asset should be adjusted include the following:
(a) The quoted price for the asset relates to a similar (but not identical) liability or equity instrument held by another party as an asset. For example, the liability or equity instrument may have a particular characteristic (eg the credit quality of the issuer) that is different from that reflected in the fair value of the similar liability or equity instrument held as an asset.
(b) The unit of account for the asset is not the same as for the liability or equity instrument. For example, for liabilities, in some cases the price for an asset reflects a combined price for a package comprising both the amounts due from the issuer and a third-party credit enhancement. If the unit of account for the liability is not for the combined package, the objective is to measure the fair value of the issuer’s liability, not the fair value of the combined package. Thus, in such cases, the entity would adjust the observed price for the asset to exclude the effect of the third-party credit enhancement.
40 When a quoted price for the transfer of an identical or a similar liability or entity’s own equity instrument is not available and the identical item is not held by another party as an asset, an entity shall measure the fair value of the liability or equity instrument using a valuation technique from the perspective of a market participant that owes the liability or has issued the claim on equity.
41 For example, when applying a present value technique an entity might take into account either of the following:
(a) the future cash outflows that a market participant would expect to incur in fulfilling the obligation, including the compensation that a market participant would require for taking on the obligation (see paragraphs B31–B33).
(b) the amount that a market participant would receive to enter into or issue an identical liability or equity instrument, using the assumptions that market participants would use when pricing the identical item (eg having the same credit characteristics) in the principal (or most advantageous) market for issuing a liability or an equity instrument with the same contractual terms.
42 The fair value of a liability reflects the effect of non-performance risk. Non-performance risk includes, but may not be limited to, an entity’s own credit risk (as defined in AASB 7 Financial Instruments: Disclosures). Non-performance risk is assumed to be the same before and after the transfer of the liability.
43 When measuring the fair value of a liability, an entity shall take into account the effect of its credit risk (credit standing) and any other factors that might influence the likelihood that the obligation will or will not be fulfilled. That effect may differ depending on the liability, for example:
(a) whether the liability is an obligation to deliver cash (a financial liability) or an obligation to deliver goods or services (a non-financial liability).
(b) the terms of credit enhancements related to the liability, if any.
44 The fair value of a liability reflects the effect of non-performance risk on the basis of its unit of account. The issuer of a liability issued with an inseparable third-party credit enhancement that is accounted for separately from the liability shall not include the effect of the credit enhancement (eg a third-party guarantee of debt) in the fair value measurement of the liability. If the credit enhancement is accounted for separately from the liability, the issuer would take into account its own credit standing and not that of the third party guarantor when measuring the fair value of the liability.
45 When measuring the fair value of a liability or an entity’s own equity instrument, an entity shall not include a separate input or an adjustment to other inputs relating to the existence of a restriction that prevents the transfer of the item. The effect of a restriction that prevents the transfer of a liability or an entity’s own equity instrument is either implicitly or explicitly included in the other inputs to the fair value measurement.
46 For example, at the transaction date, both the creditor and the obligor accepted the transaction price for the liability with full knowledge that the obligation includes a restriction that prevents its transfer. As a result of the restriction being included in the transaction price, a separate input or an adjustment to an existing input is not required at the transaction date to reflect the effect of the restriction on transfer. Similarly, a separate input or an adjustment to an existing input is not required at subsequent measurement dates to reflect the effect of the restriction on transfer.
47 The fair value of a financial liability with a demand feature (eg a demand deposit) is not less than the amount payable on demand, discounted from the first date that the amount could be required to be paid.
48 An entity that holds a group of financial assets and financial liabilities is exposed to market risks (as defined in AASB 7) and to the credit risk (as defined in AASB 7) of each of the counterparties. If the entity manages that group of financial assets and financial liabilities on the basis of its net exposure to either market risks or credit risk, the entity is permitted to apply an exception to this Standard for measuring fair value. That exception permits an entity to measure the fair value of a group of financial assets and financial liabilities on the basis of the price that would be received to sell a net long position (ie an asset) for a particular risk exposure or paid to transfer a net short position (ie a liability) for a particular risk exposure in an orderly transaction between market participants at the measurement date under current market conditions. Accordingly, an entity shall measure the fair value of the group of financial assets and financial liabilities consistently with how market participants would price the net risk exposure at the measurement date.
49 An entity is permitted to use the exception in paragraph 48 only if the entity does all the following:
(a) manages the group of financial assets and financial liabilities on the basis of the entity’s net exposure to a particular market risk (or risks) or to the credit risk of a particular counterparty in accordance with the entity’s documented risk management or investment strategy;
(b) provides information on that basis about the group of financial assets and financial liabilities to the entity’s key management personnel, as defined in AASB 124 Related Party Disclosures; and
(c) is required or has elected to measure those financial assets and financial liabilities at fair value in the statement of financial position at the end of each reporting period.
50 The exception in paragraph 48 does not pertain to financial statement presentation. In some cases the basis for the presentation of financial instruments in the statement of financial position differs from the basis for the measurement of financial instruments, for example, if a Standard does not require or permit financial instruments to be presented on a net basis. In such cases an entity may need to allocate the portfolio-level adjustments (see paragraphs 53–56) to the individual assets or liabilities that make up the group of financial assets and financial liabilities managed on the basis of the entity’s net risk exposure. An entity shall perform such allocations on a reasonable and consistent basis using a methodology appropriate in the circumstances.
51 An entity shall make an accounting policy decision in accordance with AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors to use the exception in paragraph 48. An entity that uses the exception shall apply that accounting policy, including its policy for allocating bid-ask adjustments (see paragraphs 53–55) and credit adjustments (see paragraph 56), if applicable, consistently from period to period for a particular portfolio.
52 The exception in paragraph 48 applies only to financial assets, financial liabilities and other contracts within the scope of AASB 9 Financial Instruments (or AASB 139 Financial Instruments: Recognition and Measurement, if AASB 9 has not yet been adopted). The references to financial assets and financial liabilities in paragraphs 48–51 and 53–56 should be read as applying to all contracts within the scope of, and accounted for in accordance with, AASB 9 (or AASB 139, if AASB 9 has not yet been adopted), regardless of whether they meet the definitions of financial assets or financial liabilities in AASB 132 Financial Instruments: Presentation.
53 When using the exception in paragraph 48 to measure the fair value of a group of financial assets and financial liabilities managed on the basis of the entity’s net exposure to a particular market risk (or risks), the entity shall apply the price within the bid-ask spread that is most representative of fair value in the circumstances to the entity’s net exposure to those market risks (see paragraphs 70 and 71).
54 When using the exception in paragraph 48, an entity shall ensure that the market risk (or risks) to which the entity is exposed within that group of financial assets and financial liabilities is substantially the same. For example, an entity would not combine the interest rate risk associated with a financial asset with the commodity price risk associated with a financial liability because doing so would not mitigate the entity’s exposure to interest rate risk or commodity price risk. When using the exception in paragraph 48, any basis risk resulting from the market risk parameters not being identical shall be taken into account in the fair value measurement of the financial assets and financial liabilities within the group.
55 Similarly, the duration of the entity’s exposure to a particular market risk (or risks) arising from the financial assets and financial liabilities shall be substantially the same. For example, an entity that uses a 12‑month futures contract against the cash flows associated with 12 months’ worth of interest rate risk exposure on a five-year financial instrument within a group made up of only those financial assets and financial liabilities measures the fair value of the exposure to 12-month interest rate risk on a net basis and the remaining interest rate risk exposure (ie years 2–5) on a gross basis.
56 When using the exception in paragraph 48 to measure the fair value of a group of financial assets and financial liabilities entered into with a particular counterparty, the entity shall include the effect of the entity’s net exposure to the credit risk of that counterparty or the counterparty’s net exposure to the credit risk of the entity in the fair value measurement when market participants would take into account any existing arrangements that mitigate credit risk exposure in the event of default (eg a master netting agreement with the counterparty or an agreement that requires the exchange of collateral on the basis of each party’s net exposure to the credit risk of the other party). The fair value measurement shall reflect market participants’ expectations about the likelihood that such an arrangement would be legally enforceable in the event of default.
57 When an asset is acquired or a liability is assumed in an exchange transaction for that asset or liability, the transaction price is the price paid to acquire the asset or received to assume the liability (an entry price). In contrast, the fair value of the asset or liability is the price that would be received to sell the asset or paid to transfer the liability (an exit price). Entities do not necessarily sell assets at the prices paid to acquire them. Similarly, entities do not necessarily transfer liabilities at the prices received to assume them.
58 In many cases the transaction price will equal the fair value (eg that might be the case when on the transaction date the transaction to buy an asset takes place in the market in which the asset would be sold).
59 When determining whether fair value at initial recognition equals the transaction price, an entity shall take into account factors specific to the transaction and to the asset or liability. Paragraph B4 describes situations in which the transaction price might not represent the fair value of an asset or a liability at initial recognition.
60 If another Standard requires or permits an entity to measure an asset or a liability initially at fair value and the transaction price differs from fair value, the entity shall recognise the resulting gain or loss in profit or loss unless that Standard specifies otherwise.
61 An entity shall use valuation techniques that are appropriate in the circumstances and for which sufficient data are available to measure fair value, maximising the use of relevant observable inputs and minimising the use of unobservable inputs.
62 The objective of using a valuation technique is to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions. Three widely used valuation techniques are the market approach, the cost approach and the income approach. The main aspects of those approaches are summarised in paragraphs B5–B11. An entity shall use valuation techniques consistent with one or more of those approaches to measure fair value.
63 In some cases a single valuation technique will be appropriate (eg when valuing an asset or a liability using quoted prices in an active market for identical assets or liabilities). In other cases, multiple valuation techniques will be appropriate (eg that might be the case when valuing a cash-generating unit). If multiple valuation techniques are used to measure fair value, the results (ie respective indications of fair value) shall be evaluated considering the reasonableness of the range of values indicated by those results. A fair value measurement is the point within that range that is most representative of fair value in the circumstances.
64 If the transaction price is fair value at initial recognition and a valuation technique that uses unobservable inputs will be used to measure fair value in subsequent periods, the valuation technique shall be calibrated so that at initial recognition the result of the valuation technique equals the transaction price. Calibration ensures that the valuation technique reflects current market conditions, and it helps an entity to determine whether an adjustment to the valuation technique is necessary (eg there might be a characteristic of the asset or liability that is not captured by the valuation technique). After initial recognition, when measuring fair value using a valuation technique or techniques that use unobservable inputs, an entity shall ensure that those valuation techniques reflect observable market data (eg the price for a similar asset or liability) at the measurement date.
65 Valuation techniques used to measure fair value shall be applied consistently. However, a change in a valuation technique or its application (eg a change in its weighting when multiple valuation techniques are used or a change in an adjustment applied to a valuation technique) is appropriate if the change results in a measurement that is equally or more representative of fair value in the circumstances. That might be the case if, for example, any of the following events take place:
(a) new markets develop;
(b) new information becomes available;
(c) information previously used is no longer available;
(d) valuation techniques improve; or
(e) market conditions change.
66 Revisions resulting from a change in the valuation technique or its application shall be accounted for as a change in accounting estimate in accordance with AASB 108. However, the disclosures in AASB 108 for a change in accounting estimate are not required for revisions resulting from a change in a valuation technique or its application.
67 Valuation techniques used to measure fair value shall maximise the use of relevant observable inputs and minimise the use of unobservable inputs.
68 Examples of markets in which inputs might be observable for some assets and liabilities (eg financial instruments) include exchange markets, dealer markets, brokered markets and principal-to-principal markets (see paragraph B34).
69 An entity shall select inputs that are consistent with the characteristics of the asset or liability that market participants would take into account in a transaction for the asset or liability (see paragraphs 11 and 12). In some cases those characteristics result in the application of an adjustment, such as a premium or discount (eg a control premium or non-controlling interest discount). However, a fair value measurement shall not incorporate a premium or discount that is inconsistent with the unit of account in the Standard that requires or permits the fair value measurement (see paragraphs 13 and 14). Premiums or discounts that reflect size as a characteristic of the entity’s holding (specifically, a blockage factor that adjusts the quoted price of an asset or a liability because the market’s normal daily trading volume is not sufficient to absorb the quantity held by the entity, as described in paragraph 80) rather than as a characteristic of the asset or liability (eg a control premium when measuring the fair value of a controlling interest) are not permitted in a fair value measurement. In all cases, if there is a quoted price in an active market (ie a Level 1 input) for an asset or a liability, an entity shall use that price without adjustment when measuring fair value, except as specified in paragraph 79.
70 If an asset or a liability measured at fair value has a bid price and an ask price (eg an input from a dealer market), the price within the bid-ask spread that is most representative of fair value in the circumstances shall be used to measure fair value regardless of where the input is categorised within the fair value hierarchy (ie Level 1, 2 or 3; see paragraphs 72–90). The use of bid prices for asset positions and ask prices for liability positions is permitted, but is not required.
71 This Standard does not preclude the use of mid-market pricing or other pricing conventions that are used by market participants as a practical expedient for fair value measurements within a bid-ask spread.
72 To increase consistency and comparability in fair value measurements and related disclosures, this Standard establishes a fair value hierarchy that categorises into three levels (see paragraphs 76–90) the inputs to valuation techniques used to measure fair value. The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities (Level 1 inputs) and the lowest priority to unobservable inputs (Level 3 inputs).
73 In some cases, the inputs used to measure the fair value of an asset or a liability might be categorised within different levels of the fair value hierarchy. In those cases, the fair value measurement is categorised in its entirety in the same level of the fair value hierarchy as the lowest level input that is significant to the entire measurement. Assessing the significance of a particular input to the entire measurement requires judgement, taking into account factors specific to the asset or liability. Adjustments to arrive at measurements based on fair value, such as costs to sell when measuring fair value less costs to sell, shall not be taken into account when determining the level of the fair value hierarchy within which a fair value measurement is categorised.
74 The availability of relevant inputs and their relative subjectivity might affect the selection of appropriate valuation techniques (see paragraph 61). However, the fair value hierarchy prioritises the inputs to valuation techniques, not the valuation techniques used to measure fair value. For example, a fair value measurement developed using a present value technique might be categorised within Level 2 or Level 3, depending on the inputs that are significant to the entire measurement and the level of the fair value hierarchy within which those inputs are categorised.
75 If an observable input requires an adjustment using an unobservable input and that adjustment results in a significantly higher or lower fair value measurement, the resulting measurement would be categorised within Level 3 of the fair value hierarchy. For example, if a market participant would take into account the effect of a restriction on the sale of an asset when estimating the price for the asset, an entity would adjust the quoted price to reflect the effect of that restriction. If that quoted price is a Level 2 input and the adjustment is an unobservable input that is significant to the entire measurement, the measurement would be categorised within Level 3 of the fair value hierarchy.
76 Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities that the entity can access at the measurement date.
77 A quoted price in an active market provides the most reliable evidence of fair value and shall be used without adjustment to measure fair value whenever available, except as specified in paragraph 79.
78 A Level 1 input will be available for many financial assets and financial liabilities, some of which might be exchanged in multiple active markets (eg on different exchanges). Therefore, the emphasis within Level 1 is on determining both of the following:
(a) the principal market for the asset or liability or, in the absence of a principal market, the most advantageous market for the asset or liability; and
(b) whether the entity can enter into a transaction for the asset or liability at the price in that market at the measurement date.
79 An entity shall not make an adjustment to a Level 1 input except in the following circumstances:
(a) when an entity holds a large number of similar (but not identical) assets or liabilities (eg debt securities) that are measured at fair value and a quoted price in an active market is available but not readily accessible for each of those assets or liabilities individually (ie given the large number of similar assets or liabilities held by the entity, it would be difficult to obtain pricing information for each individual asset or liability at the measurement date). In that case, as a practical expedient, an entity may measure fair value using an alternative pricing method that does not rely exclusively on quoted prices (eg matrix pricing). However, the use of an alternative pricing method results in a fair value measurement categorised within a lower level of the fair value hierarchy.
(b) when a quoted price in an active market does not represent fair value at the measurement date. That might be the case if, for example, significant events (such as transactions in a principal-to-principal market, trades in a brokered market or announcements) take place after the close of a market but before the measurement date. An entity shall establish and consistently apply a policy for identifying those events that might affect fair value measurements. However, if the quoted price is adjusted for new information, the adjustment results in a fair value measurement categorised within a lower level of the fair value hierarchy.
(c) when measuring the fair value of a liability or an entity’s own equity instrument using the quoted price for the identical item traded as an asset in an active market and that price needs to be adjusted for factors specific to the item or the asset (see paragraph 39). If no adjustment to the quoted price of the asset is required, the result is a fair value measurement categorised within Level 1 of the fair value hierarchy. However, any adjustment to the quoted price of the asset results in a fair value measurement categorised within a lower level of the fair value hierarchy.
80 If an entity holds a position in a single asset or liability (including a position comprising a large number of identical assets or liabilities, such as a holding of financial instruments) and the asset or liability is traded in an active market, the fair value of the asset or liability shall be measured within Level 1 as the product of the quoted price for the individual asset or liability and the quantity held by the entity. That is the case even if a market’s normal daily trading volume is not sufficient to absorb the quantity held and placing orders to sell the position in a single transaction might affect the quoted price.
81 Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly.
82 If the asset or liability has a specified (contractual) term, a Level 2 input must be observable for substantially the full term of the asset or liability. Level 2 inputs include the following:
(a) quoted prices for similar assets or liabilities in active markets.
(b) quoted prices for identical or similar assets or liabilities in markets that are not active.
(c) inputs other than quoted prices that are observable for the asset or liability, for example:
(i) interest rates and yield curves observable at commonly quoted intervals;
(ii) implied volatilities; and
(iii) credit spreads.
(d) market-corroborated inputs.
83 Adjustments to Level 2 inputs will vary depending on factors specific to the asset or liability. Those factors include the following:
(a) the condition or location of the asset;
(b) the extent to which inputs relate to items that are comparable to the asset or liability (including those factors described in paragraph 39); and
(c) the volume or level of activity in the markets within which the inputs are observed.
84 An adjustment to a Level 2 input that is significant to the entire measurement might result in a fair value measurement categorised within Level 3 of the fair value hierarchy if the adjustment uses significant unobservable inputs.
85 Paragraph B35 describes the use of Level 2 inputs for particular assets and liabilities.
86 Level 3 inputs are unobservable inputs for the asset or liability.
87 Unobservable inputs shall be used to measure fair value to the extent that relevant observable inputs are not available, thereby allowing for situations in which there is little, if any, market activity for the asset or liability at the measurement date. However, the fair value measurement objective remains the same, ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability. Therefore, unobservable inputs shall reflect the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk.
88 Assumptions about risk include the risk inherent in a particular valuation technique used to measure fair value (such as a pricing model) and the risk inherent in the inputs to the valuation technique. A measurement that does not include an adjustment for risk would not represent a fair value measurement if market participants would include one when pricing the asset or liability. For example, it might be necessary to include a risk adjustment when there is significant measurement uncertainty (eg when there has been a significant decrease in the volume or level of activity when compared with normal market activity for the asset or liability, or similar assets or liabilities, and the entity has determined that the transaction price or quoted price does not represent fair value, as described in paragraphs B37–B47).
89 An entity shall develop unobservable inputs using the best information available in the circumstances, which might include the entity’s own data. In developing unobservable inputs, an entity may begin with its own data, but it shall adjust those data if reasonably available information indicates that other market participants would use different data or there is something particular to the entity that is not available to other market participants (eg an entity-specific synergy). An entity need not undertake exhaustive efforts to obtain information about market participant assumptions. However, an entity shall take into account all information about market participant assumptions that is reasonably available. Unobservable inputs developed in the manner described above are considered market participant assumptions and meet the objective of a fair value measurement.
90 Paragraph B36 describes the use of Level 3 inputs for particular assets and liabilities.
91 An entity shall disclose information that helps users of its financial statements assess both of the following:
(a) for assets and liabilities that are measured at fair value on a recurring or non-recurring basis in the statement of financial position after initial recognition, the valuation techniques and inputs used to develop those measurements.
(b) for recurring fair value measurements using significant unobservable inputs (Level 3), the effect of the measurements on profit or loss or other comprehensive income for the period.
92 To meet the objectives in paragraph 91, an entity shall consider all the following:
(a) the level of detail necessary to satisfy the disclosure requirements;
(b) how much emphasis to place on each of the various requirements;
(c) how much aggregation or disaggregation to undertake; and
(d) whether users of financial statements need additional information to evaluate the quantitative information disclosed.
If the disclosures provided in accordance with this Standard and other Australian Accounting Standards are insufficient to meet the objectives in paragraph 91, an entity shall disclose additional information necessary to meet those objectives.
93 To meet the objectives in paragraph 91, an entity shall disclose, at a minimum, the following information for each class of assets and liabilities (see paragraph 94 for information on determining appropriate classes of assets and liabilities) measured at fair value (including measurements based on fair value within the scope of this Standard) in the statement of financial position after initial recognition:
(a) for recurring and non-recurring fair value measurements, the fair value measurement at the end of the reporting period, and for non-recurring fair value measurements, the reasons for the measurement. Recurring fair value measurements of assets or liabilities are those that other Australian Accounting Standards require or permit in the statement of financial position at the end of each reporting period. Non-recurring fair value measurements of assets or liabilities are those that other Australian Accounting Standards require or permit in the statement of financial position in particular circumstances (eg when an entity measures an asset held for sale at fair value less costs to sell in accordance with AASB 5 Non-current Assets Held for Sale and Discontinued Operations because the asset’s fair value less costs to sell is lower than its carrying amount).
(b) for recurring and non-recurring fair value measurements, the level of the fair value hierarchy within which the fair value measurements are categorised in their entirety (Level 1, 2 or 3).
(c) for assets and liabilities held at the end of the reporting period that are measured at fair value on a recurring basis, the amounts of any transfers between Level 1 and Level 2 of the fair value hierarchy, the reasons for those transfers and the entity’s policy for determining when transfers between levels are deemed to have occurred (see paragraph 95). Transfers into each level shall be disclosed and discussed separately from transfers out of each level.
(d) for recurring and non-recurring fair value measurements categorised within Level 2 and Level 3 of the fair value hierarchy, a description of the valuation technique(s) and the inputs used in the fair value measurement. If there has been a change in valuation technique (eg changing from a market approach to an income approach or the use of an additional valuation technique), the entity shall disclose that change and the reason(s) for making it. For fair value measurements categorised within Level 3 of the fair value hierarchy, an entity shall provide quantitative information about the significant unobservable inputs used in the fair value measurement. An entity is not required to create quantitative information to comply with this disclosure requirement if quantitative unobservable inputs are not developed by the entity when measuring fair value (eg when an entity uses prices from prior transactions or third-party pricing information without adjustment). However, when providing this disclosure an entity cannot ignore quantitative unobservable inputs that are significant to the fair value measurement and are reasonably available to the entity.
(e) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy, a reconciliation from the opening balances to the closing balances, disclosing separately changes during the period attributable to the following:
(i) total gains or losses for the period recognised in profit or loss, and the line item(s) in profit or loss in which those gains or losses are recognised.
(ii) total gains or losses for the period recognised in other comprehensive income, and the line item(s) in other comprehensive income in which those gains or losses are recognised.
(iii) purchases, sales, issues and settlements (each of those types of changes disclosed separately).
(iv) the amounts of any transfers into or out of Level 3 of the fair value hierarchy, the reasons for those transfers and the entity’s policy for determining when transfers between levels are deemed to have occurred (see paragraph 95). Transfers into Level 3 shall be disclosed and discussed separately from transfers out of Level 3.
(f) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy, the amount of the total gains or losses for the period in (e)(i) included in profit or loss that is attributable to the change in unrealised gains or losses relating to those assets and liabilities held at the end of the reporting period, and the line item(s) in profit or loss in which those unrealised gains or losses are recognised.
(g) for recurring and non-recurring fair value measurements categorised within Level 3 of the fair value hierarchy, a description of the valuation processes used by the entity (including, for example, how an entity decides its valuation policies and procedures and analyses changes in fair value measurements from period to period).
(h) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy:
(i) for all such measurements, a narrative description of the sensitivity of the fair value measurement to changes in unobservable inputs if a change in those inputs to a different amount might result in a significantly higher or lower fair value measurement. If there are interrelationships between those inputs and other unobservable inputs used in the fair value measurement, an entity shall also provide a description of those interrelationships and of how they might magnify or mitigate the effect of changes in the unobservable inputs on the fair value measurement. To comply with that disclosure requirement, the narrative description of the sensitivity to changes in unobservable inputs shall include, at a minimum, the unobservable inputs disclosed when complying with (d).
(ii) for financial assets and financial liabilities, if changing one or more of the unobservable inputs to reflect reasonably possible alternative assumptions would change fair value significantly, an entity shall state that fact and disclose the effect of those changes. The entity shall disclose how the effect of a change to reflect a reasonably possible alternative assumption was calculated. For that purpose, significance shall be judged with respect to profit or loss, and total assets or total liabilities, or, when changes in fair value are recognised in other comprehensive income, total equity.
(i) for recurring and non-recurring fair value measurements, if the highest and best use of a non-financial asset differs from its current use, an entity shall disclose that fact and why the non-financial asset is being used in a manner that differs from its highest and best use.
Aus93.1 Notwithstanding paragraph 93, in respect of not-for-profit public sector entities, for assets within the scope of AASB 116 Property, Plant and Equipment for which the future economic benefits are not primarily dependent on the asset’s ability to generate net cash inflows, the following requirements do not apply:
(a) in paragraph 93(d), the text “For fair value measurements categorised within Level 3 of the fair value hierarchy, an entity shall provide quantitative information about the significant unobservable inputs used in the fair value measurement. An entity is not required to create quantitative information to comply with this disclosure requirement if quantitative unobservable inputs are not developed by the entity when measuring fair value (eg when an entity uses prices from prior transactions or third-party pricing information without adjustment). However, when providing this disclosure an entity cannot ignore quantitative unobservable inputs that are significant to the fair value measurement and are reasonably available to the entity.”;
(b) paragraph 93(f); and
(c) paragraph 93(h)(i).
94 An entity shall determine appropriate classes of assets and liabilities on the basis of the following:
(a) the nature, characteristics and risks of the asset or liability; and
(b) the level of the fair value hierarchy within which the fair value measurement is categorised.
The number of classes may need to be greater for fair value measurements categorised within Level 3 of the fair value hierarchy because those measurements have a greater degree of uncertainty and subjectivity. Determining appropriate classes of assets and liabilities for which disclosures about fair value measurements should be provided requires judgement. A class of assets and liabilities will often require greater disaggregation than the line items presented in the statement of financial position. However, an entity shall provide information sufficient to permit reconciliation to the line items presented in the statement of financial position. If another Standard specifies the class for an asset or a liability, an entity may use that class in providing the disclosures required in this Standard if that class meets the requirements in this paragraph.
95 An entity shall disclose and consistently follow its policy for determining when transfers between levels of the fair value hierarchy are deemed to have occurred in accordance with paragraph 93(c) and (e)(iv). The policy about the timing of recognising transfers shall be the same for transfers into the levels as for transfers out of the levels. Examples of policies for determining the timing of transfers include the following:
(a) the date of the event or change in circumstances that caused the transfer.
(b) the beginning of the reporting period.
(c) the end of the reporting period.
96 If an entity makes an accounting policy decision to use the exception in paragraph 48, it shall disclose that fact.
97 For each class of assets and liabilities not measured at fair value in the statement of financial position but for which the fair value is disclosed, an entity shall disclose the information required by paragraph 93(b), (d) and (i). However, an entity is not required to provide the quantitative disclosures about significant unobservable inputs used in fair value measurements categorised within Level 3 of the fair value hierarchy required by paragraph 93(d). For such assets and liabilities, an entity does not need to provide the other disclosures required by this Standard.
98 For a liability measured at fair value and issued with an inseparable third-party credit enhancement, an issuer shall disclose the existence of that credit enhancement and whether it is reflected in the fair value measurement of the liability.
99 An entity shall present the quantitative disclosures required by this Standard in a tabular format unless another format is more appropriate.
9 This Standard defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.
10 Paragraph B2 describes the overall fair value measurement approach.
11 A fair value measurement is for a particular asset or liability. Therefore, when measuring fair value an entity shall take into account the characteristics of the asset or liability if market participants would take those characteristics into account when pricing the asset or liability at the measurement date. Such characteristics include, for example, the following:
(a) the condition and location of the asset; and
(b) restrictions, if any, on the sale or use of the asset.
12 The effect on the measurement arising from a particular characteristic will differ depending on how that characteristic would be taken into account by market participants.
13 The asset or liability measured at fair value might be either of the following:
(a) a stand-alone asset or liability (eg a financial instrument or a non-financial asset); or
(b) a group of assets, a group of liabilities or a group of assets and liabilities (eg a cash-generating unit or a business).
14 Whether the asset or liability is a stand-alone asset or liability, a group of assets, a group of liabilities or a group of assets and liabilities for recognition or disclosure purposes depends on its unit of account. The unit of account for the asset or liability shall be determined in accordance with the Standard that requires or permits the fair value measurement, except as provided in this Standard.
15 A fair value measurement assumes that the asset or liability is exchanged in an orderly transaction between market participants to sell the asset or transfer the liability at the measurement date under current market conditions.
16 A fair value measurement assumes that the transaction to sell the asset or transfer the liability takes place either:
(a) in the principal market for the asset or liability; or
(b) in the absence of a principal market, in the most advantageous market for the asset or liability.
17 An entity need not undertake an exhaustive search of all possible markets to identify the principal market or, in the absence of a principal market, the most advantageous market, but it shall take into account all information that is reasonably available. In the absence of evidence to the contrary, the market in which the entity would normally enter into a transaction to sell the asset or to transfer the liability is presumed to be the principal market or, in the absence of a principal market, the most advantageous market.
18 If there is a principal market for the asset or liability, the fair value measurement shall represent the price in that market (whether that price is directly observable or estimated using another valuation technique), even if the price in a different market is potentially more advantageous at the measurement date.
19 The entity must have access to the principal (or most advantageous) market at the measurement date. Because different entities (and businesses within those entities) with different activities may have access to different markets, the principal (or most advantageous) market for the same asset or liability might be different for different entities (and businesses within those entities). Therefore, the principal (or most advantageous) market (and thus, market participants) shall be considered from the perspective of the entity, thereby allowing for differences between and among entities with different activities.
20 Although an entity must be able to access the market, the entity does not need to be able to sell the particular asset or transfer the particular liability on the measurement date to be able to measure fair value on the basis of the price in that market.
21 Even when there is no observable market to provide pricing information about the sale of an asset or the transfer of a liability at the measurement date, a fair value measurement shall assume that a transaction takes place at that date, considered from the perspective of a market participant that holds the asset or owes the liability. That assumed transaction establishes a basis for estimating the price to sell the asset or to transfer the liability.
22 An entity shall measure the fair value of an asset or a liability using the assumptions that market participants would use when pricing the asset or liability, assuming that market participants act in their economic best interest.
23 In developing those assumptions, an entity need not identify specific market participants. Rather, the entity shall identify characteristics that distinguish market participants generally, considering factors specific to all the following:
(a) the asset or liability;
(b) the principal (or most advantageous) market for the asset or liability; and
(c) market participants with whom the entity would enter into a transaction in that market.
24 Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction in the principal (or most advantageous) market at the measurement date under current market conditions (ie an exit price) regardless of whether that price is directly observable or estimated using another valuation technique.
25 The price in the principal (or most advantageous) market used to measure the fair value of the asset or liability shall not be adjusted for transaction costs. Transaction costs shall be accounted for in accordance with other Australian Accounting Standards. Transaction costs are not a characteristic of an asset or a liability; rather, they are specific to a transaction and will differ depending on how an entity enters into a transaction for the asset or liability.
26 Transaction costs do not include transport costs. If location is a characteristic of the asset (as might be the case, for example, for a commodity), the price in the principal (or most advantageous) market shall be adjusted for the costs, if any, that would be incurred to transport the asset from its current location to that market.
The Australian Accounting Standards Board made Accounting Standard AASB 13 Fair Value Measurement under section 334 of the Corporations Act 2001 on 2 September 2011.
This compiled version of AASB 13 applies to annual reporting periods beginning on or after 1 January 2018. It incorporates relevant amendments contained in other AASB Standards made by the AASB up to and including 8 July 2015 (see Compilation Details).
Fair Value Measurement
1 This Standard:
(a) defines fair value;
(b) sets out in a single Standard a framework for measuring fair value; and
(c) requires disclosures about fair value measurements.
2 Fair value is a market-based measurement, not an entity-specific measurement. For some assets and liabilities, observable market transactions or market information might be available. For other assets and liabilities, observable market transactions and market information might not be available. However, the objective of a fair value measurement in both cases is the same – to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions (ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability).
3 When a price for an identical asset or liability is not observable, an entity measures fair value using another valuation technique that maximises the use of relevant observable inputs and minimises the use of unobservable inputs. Because fair value is a market-based measurement, it is measured using the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk. As a result, an entity’s intention to hold an asset or to settle or otherwise fulfil a liability is not relevant when measuring fair value.
4 The definition of fair value focuses on assets and liabilities because they are a primary subject of accounting measurement. In addition, this Standard shall be applied to an entity’s own equity instruments measured at fair value.
Aus4.1 This Standard applies to:
(a) each entity that is required to prepare financial reports in accordance with Part 2M.3 of the Corporations Act and that is a reporting entity;
(b) general purpose financial statements of each other reporting entity; and
(c) financial statements that are, or are held out to be, general purpose financial statements.
Aus4.2 This Standard applies to annual reporting periods beginning on or after 1 January 2013.
[Note: For application dates of paragraphs changed or added by an amending Standard, see Compilation Details.]
Aus4.3 This Standard may be applied to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013. If an entity applies this Standard to such an annual reporting period, it shall disclose that fact.
Aus4.4 [Deleted by the AASB]
Aus4.5 The text “both of” in the lead in of paragraph 91 and paragraphs 91(b), 93(b)–(i), 95 and 97–99 of this Standard do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements. Entities applying Australian Accounting Standards – Reduced Disclosure Requirements may elect to comply with some or all of these excluded requirements.
Aus4.6 The requirements that do not apply to entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements are identified in this Standard by shading of the relevant text.
5 This Standard applies when another Standard requires or permits fair value measurements or disclosures about fair value measurements (and measurements, such as fair value less costs to sell, based on fair value or disclosures about those measurements), except as specified in paragraphs 6 and 7.
6 The measurement and disclosure requirements of this Standard do not apply to the following:
(a) share-based payment transactions within the scope of AASB 2 Share-based Payment;
(b) leasing transactions within the scope of AASB 117 Leases; and
(c) measurements that have some similarities to fair value but are not fair value, such as net realisable value in AASB 102 Inventories or value in use in AASB 136 Impairment of Assets.
7 The disclosures required by this Standard are not required for the following:
(a) plan assets measured at fair value in accordance with AASB 119 Employee Benefits; and
(b) [deleted by the AASB]
(c) assets for which recoverable amount is fair value less costs of disposal in accordance with AASB 136.
8 The fair value measurement framework described in this Standard applies to both initial and subsequent measurement if fair value is required or permitted by other Australian Accounting Standards.
9 This Standard defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.
10 Paragraph B2 describes the overall fair value measurement approach.
11 A fair value measurement is for a particular asset or liability. Therefore, when measuring fair value an entity shall take into account the characteristics of the asset or liability if market participants would take those characteristics into account when pricing the asset or liability at the measurement date. Such characteristics include, for example, the following:
(a) the condition and location of the asset; and
(b) restrictions, if any, on the sale or use of the asset.
12 The effect on the measurement arising from a particular characteristic will differ depending on how that characteristic would be taken into account by market participants.
13 The asset or liability measured at fair value might be either of the following:
(a) a stand-alone asset or liability (eg a financial instrument or a non-financial asset); or
(b) a group of assets, a group of liabilities or a group of assets and liabilities (eg a cash-generating unit or a business).
14 Whether the asset or liability is a stand-alone asset or liability, a group of assets, a group of liabilities or a group of assets and liabilities for recognition or disclosure purposes depends on its unit of account. The unit of account for the asset or liability shall be determined in accordance with the Standard that requires or permits the fair value measurement, except as provided in this Standard.
15 A fair value measurement assumes that the asset or liability is exchanged in an orderly transaction between market participants to sell the asset or transfer the liability at the measurement date under current market conditions.
16 A fair value measurement assumes that the transaction to sell the asset or transfer the liability takes place either:
(a) in the principal market for the asset or liability; or
(b) in the absence of a principal market, in the most advantageous market for the asset or liability.
17 An entity need not undertake an exhaustive search of all possible markets to identify the principal market or, in the absence of a principal market, the most advantageous market, but it shall take into account all information that is reasonably available. In the absence of evidence to the contrary, the market in which the entity would normally enter into a transaction to sell the asset or to transfer the liability is presumed to be the principal market or, in the absence of a principal market, the most advantageous market.
18 If there is a principal market for the asset or liability, the fair value measurement shall represent the price in that market (whether that price is directly observable or estimated using another valuation technique), even if the price in a different market is potentially more advantageous at the measurement date.
19 The entity must have access to the principal (or most advantageous) market at the measurement date. Because different entities (and businesses within those entities) with different activities may have access to different markets, the principal (or most advantageous) market for the same asset or liability might be different for different entities (and businesses within those entities). Therefore, the principal (or most advantageous) market (and thus, market participants) shall be considered from the perspective of the entity, thereby allowing for differences between and among entities with different activities.
20 Although an entity must be able to access the market, the entity does not need to be able to sell the particular asset or transfer the particular liability on the measurement date to be able to measure fair value on the basis of the price in that market.
21 Even when there is no observable market to provide pricing information about the sale of an asset or the transfer of a liability at the measurement date, a fair value measurement shall assume that a transaction takes place at that date, considered from the perspective of a market participant that holds the asset or owes the liability. That assumed transaction establishes a basis for estimating the price to sell the asset or to transfer the liability.
22 An entity shall measure the fair value of an asset or a liability using the assumptions that market participants would use when pricing the asset or liability, assuming that market participants act in their economic best interest.
23 In developing those assumptions, an entity need not identify specific market participants. Rather, the entity shall identify characteristics that distinguish market participants generally, considering factors specific to all the following:
(a) the asset or liability;
(b) the principal (or most advantageous) market for the asset or liability; and
(c) market participants with whom the entity would enter into a transaction in that market.
24 Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction in the principal (or most advantageous) market at the measurement date under current market conditions (ie an exit price) regardless of whether that price is directly observable or estimated using another valuation technique.
25 The price in the principal (or most advantageous) market used to measure the fair value of the asset or liability shall not be adjusted for transaction costs. Transaction costs shall be accounted for in accordance with other Australian Accounting Standards. Transaction costs are not a characteristic of an asset or a liability; rather, they are specific to a transaction and will differ depending on how an entity enters into a transaction for the asset or liability.
26 Transaction costs do not include transport costs. If location is a characteristic of the asset (as might be the case, for example, for a commodity), the price in the principal (or most advantageous) market shall be adjusted for the costs, if any, that would be incurred to transport the asset from its current location to that market.
27 A fair value measurement of a non-financial asset takes into account a market participant’s ability to generate economic benefits by using the asset in its highest and best use or by selling it to another market participant that would use the asset in its highest and best use.
28 The highest and best use of a non-financial asset takes into account the use of the asset that is physically possible, legally permissible and financially feasible, as follows:
(a) A use that is physically possible takes into account the physical characteristics of the asset that market participants would take into account when pricing the asset (eg the location or size of a property).
(b) A use that is legally permissible takes into account any legal restrictions on the use of the asset that market participants would take into account when pricing the asset (eg the zoning regulations applicable to a property).
(c) A use that is financially feasible takes into account whether a use of the asset that is physically possible and legally permissible generates adequate income or cash flows (taking into account the costs of converting the asset to that use) to produce an investment return that market participants would require from an investment in that asset put to that use.
29 Highest and best use is determined from the perspective of market participants, even if the entity intends a different use. However, an entity’s current use of a non-financial asset is presumed to be its highest and best use unless market or other factors suggest that a different use by market participants would maximise the value of the asset.
30 To protect its competitive position, or for other reasons, an entity may intend not to use an acquired non-financial asset actively or it may intend not to use the asset according to its highest and best use. For example, that might be the case for an acquired intangible asset that the entity plans to use defensively by preventing others from using it. Nevertheless, the entity shall measure the fair value of a non-financial asset assuming its highest and best use by market participants.
31 The highest and best use of a non-financial asset establishes the valuation premise used to measure the fair value of the asset, as follows:
(a) The highest and best use of a non-financial asset might provide maximum value to market participants through its use in combination with other assets as a group (as installed or otherwise configured for use) or in combination with other assets and liabilities (eg a business).
(i) If the highest and best use of the asset is to use the asset in combination with other assets or with other assets and liabilities, the fair value of the asset is the price that would be received in a current transaction to sell the asset assuming that the asset would be used with other assets or with other assets and liabilities and that those assets and liabilities (ie its complementary assets and the associated liabilities) would be available to market participants.
(ii) Liabilities associated with the asset and with the complementary assets include liabilities that fund working capital, but do not include liabilities used to fund assets other than those within the group of assets.
(iii) Assumptions about the highest and best use of a non-financial asset shall be consistent for all the assets (for which highest and best use is relevant) of the group of assets or the group of assets and liabilities within which the asset would be used.
(b) The highest and best use of a non-financial asset might provide maximum value to market participants on a stand-alone basis. If the highest and best use of the asset is to use it on a stand-alone basis, the fair value of the asset is the price that would be received in a current transaction to sell the asset to market participants that would use the asset on a stand-alone basis.
32 The fair value measurement of a non-financial asset assumes that the asset is sold consistently with the unit of account specified in other Australian Accounting Standards (which may be an individual asset). That is the case even when that fair value measurement assumes that the highest and best use of the asset is to use it in combination with other assets or with other assets and liabilities because a fair value measurement assumes that the market participant already holds the complementary assets and the associated liabilities.
33 Paragraph B3 describes the application of the valuation premise concept for non-financial assets.
34 A fair value measurement assumes that a financial or non-financial liability or an entity’s own equity instrument (eg equity interests issued as consideration in a business combination) is transferred to a market participant at the measurement date. The transfer of a liability or an entity’s own equity instrument assumes the following:
(a) A liability would remain outstanding and the market participant transferee would be required to fulfil the obligation. The liability would not be settled with the counterparty or otherwise extinguished on the measurement date.
(b) An entity’s own equity instrument would remain outstanding and the market participant transferee would take on the rights and responsibilities associated with the instrument. The instrument would not be cancelled or otherwise extinguished on the measurement date.
35 Even when there is no observable market to provide pricing information about the transfer of a liability or an entity’s own equity instrument (eg because contractual or other legal restrictions prevent the transfer of such items), there might be an observable market for such items if they are held by other parties as assets (eg a corporate bond or a call option on an entity’s shares).
36 In all cases, an entity shall maximise the use of relevant observable inputs and minimise the use of unobservable inputs to meet the objective of a fair value measurement, which is to estimate the price at which an orderly transaction to transfer the liability or equity instrument would take place between market participants at the measurement date under current market conditions.
37 When a quoted price for the transfer of an identical or a similar liability or entity’s own equity instrument is not available and the identical item is held by another party as an asset, an entity shall measure the fair value of the liability or equity instrument from the perspective of a market participant that holds the identical item as an asset at the measurement date.
38 In such cases, an entity shall measure the fair value of the liability or equity instrument as follows:
(a) using the quoted price in an active market for the identical item held by another party as an asset, if that price is available.
(b) if that price is not available, using other observable inputs, such as the quoted price in a market that is not active for the identical item held by another party as an asset.
(c) if the observable prices in (a) and (b) are not available, using another valuation technique, such as:
(i) an income approach (eg a present value technique that takes into account the future cash flows that a market participant would expect to receive from holding the liability or equity instrument as an asset; see paragraphs B10 and B11).
(ii) a market approach (eg using quoted prices for similar liabilities or equity instruments held by other parties as assets; see paragraphs B5–B7).
39 An entity shall adjust the quoted price of a liability or an entity’s own equity instrument held by another party as an asset only if there are factors specific to the asset that are not applicable to the fair value measurement of the liability or equity instrument. An entity shall ensure that the price of the asset does not reflect the effect of a restriction preventing the sale of that asset. Some factors that may indicate that the quoted price of the asset should be adjusted include the following:
(a) The quoted price for the asset relates to a similar (but not identical) liability or equity instrument held by another party as an asset. For example, the liability or equity instrument may have a particular characteristic (eg the credit quality of the issuer) that is different from that reflected in the fair value of the similar liability or equity instrument held as an asset.
(b) The unit of account for the asset is not the same as for the liability or equity instrument. For example, for liabilities, in some cases the price for an asset reflects a combined price for a package comprising both the amounts due from the issuer and a third-party credit enhancement. If the unit of account for the liability is not for the combined package, the objective is to measure the fair value of the issuer’s liability, not the fair value of the combined package. Thus, in such cases, the entity would adjust the observed price for the asset to exclude the effect of the third-party credit enhancement.
40 When a quoted price for the transfer of an identical or a similar liability or entity’s own equity instrument is not available and the identical item is not held by another party as an asset, an entity shall measure the fair value of the liability or equity instrument using a valuation technique from the perspective of a market participant that owes the liability or has issued the claim on equity.
41 For example, when applying a present value technique an entity might take into account either of the following:
(a) the future cash outflows that a market participant would expect to incur in fulfilling the obligation, including the compensation that a market participant would require for taking on the obligation (see paragraphs B31–B33).
(b) the amount that a market participant would receive to enter into or issue an identical liability or equity instrument, using the assumptions that market participants would use when pricing the identical item (eg having the same credit characteristics) in the principal (or most advantageous) market for issuing a liability or an equity instrument with the same contractual terms.
42 The fair value of a liability reflects the effect of non-performance risk. Non-performance risk includes, but may not be limited to, an entity’s own credit risk (as defined in AASB 7 Financial Instruments: Disclosures). Non-performance risk is assumed to be the same before and after the transfer of the liability.
43 When measuring the fair value of a liability, an entity shall take into account the effect of its credit risk (credit standing) and any other factors that might influence the likelihood that the obligation will or will not be fulfilled. That effect may differ depending on the liability, for example:
(a) whether the liability is an obligation to deliver cash (a financial liability) or an obligation to deliver goods or services (a non-financial liability).
(b) the terms of credit enhancements related to the liability, if any.
44 The fair value of a liability reflects the effect of non-performance risk on the basis of its unit of account. The issuer of a liability issued with an inseparable third-party credit enhancement that is accounted for separately from the liability shall not include the effect of the credit enhancement (eg a third-party guarantee of debt) in the fair value measurement of the liability. If the credit enhancement is accounted for separately from the liability, the issuer would take into account its own credit standing and not that of the third party guarantor when measuring the fair value of the liability.
45 When measuring the fair value of a liability or an entity’s own equity instrument, an entity shall not include a separate input or an adjustment to other inputs relating to the existence of a restriction that prevents the transfer of the item. The effect of a restriction that prevents the transfer of a liability or an entity’s own equity instrument is either implicitly or explicitly included in the other inputs to the fair value measurement.
46 For example, at the transaction date, both the creditor and the obligor accepted the transaction price for the liability with full knowledge that the obligation includes a restriction that prevents its transfer. As a result of the restriction being included in the transaction price, a separate input or an adjustment to an existing input is not required at the transaction date to reflect the effect of the restriction on transfer. Similarly, a separate input or an adjustment to an existing input is not required at subsequent measurement dates to reflect the effect of the restriction on transfer.
47 The fair value of a financial liability with a demand feature (eg a demand deposit) is not less than the amount payable on demand, discounted from the first date that the amount could be required to be paid.
48 An entity that holds a group of financial assets and financial liabilities is exposed to market risks (as defined in AASB 7) and to the credit risk (as defined in AASB 7) of each of the counterparties. If the entity manages that group of financial assets and financial liabilities on the basis of its net exposure to either market risks or credit risk, the entity is permitted to apply an exception to this Standard for measuring fair value. That exception permits an entity to measure the fair value of a group of financial assets and financial liabilities on the basis of the price that would be received to sell a net long position (ie an asset) for a particular risk exposure or paid to transfer a net short position (ie a liability) for a particular risk exposure in an orderly transaction between market participants at the measurement date under current market conditions. Accordingly, an entity shall measure the fair value of the group of financial assets and financial liabilities consistently with how market participants would price the net risk exposure at the measurement date.
49 An entity is permitted to use the exception in paragraph 48 only if the entity does all the following:
(a) manages the group of financial assets and financial liabilities on the basis of the entity’s net exposure to a particular market risk (or risks) or to the credit risk of a particular counterparty in accordance with the entity’s documented risk management or investment strategy;
(b) provides information on that basis about the group of financial assets and financial liabilities to the entity’s key management personnel, as defined in AASB 124 Related Party Disclosures; and
(c) is required or has elected to measure those financial assets and financial liabilities at fair value in the statement of financial position at the end of each reporting period.
50 The exception in paragraph 48 does not pertain to financial statement presentation. In some cases the basis for the presentation of financial instruments in the statement of financial position differs from the basis for the measurement of financial instruments, for example, if a Standard does not require or permit financial instruments to be presented on a net basis. In such cases an entity may need to allocate the portfolio-level adjustments (see paragraphs 53–56) to the individual assets or liabilities that make up the group of financial assets and financial liabilities managed on the basis of the entity’s net risk exposure. An entity shall perform such allocations on a reasonable and consistent basis using a methodology appropriate in the circumstances.
51 An entity shall make an accounting policy decision in accordance with AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors to use the exception in paragraph 48. An entity that uses the exception shall apply that accounting policy, including its policy for allocating bid-ask adjustments (see paragraphs 53–55) and credit adjustments (see paragraph 56), if applicable, consistently from period to period for a particular portfolio.
52 The exception in paragraph 48 applies only to financial assets, financial liabilities and other contracts within the scope of AASB 9 Financial Instruments (or AASB 139 Financial Instruments: Recognition and Measurement, if AASB 9 has not yet been adopted). The references to financial assets and financial liabilities in paragraphs 48–51 and 53–56 should be read as applying to all contracts within the scope of, and accounted for in accordance with, AASB 9 (or AASB 139, if AASB 9 has not yet been adopted), regardless of whether they meet the definitions of financial assets or financial liabilities in AASB 132 Financial Instruments: Presentation.
53 When using the exception in paragraph 48 to measure the fair value of a group of financial assets and financial liabilities managed on the basis of the entity’s net exposure to a particular market risk (or risks), the entity shall apply the price within the bid-ask spread that is most representative of fair value in the circumstances to the entity’s net exposure to those market risks (see paragraphs 70 and 71).
54 When using the exception in paragraph 48, an entity shall ensure that the market risk (or risks) to which the entity is exposed within that group of financial assets and financial liabilities is substantially the same. For example, an entity would not combine the interest rate risk associated with a financial asset with the commodity price risk associated with a financial liability because doing so would not mitigate the entity’s exposure to interest rate risk or commodity price risk. When using the exception in paragraph 48, any basis risk resulting from the market risk parameters not being identical shall be taken into account in the fair value measurement of the financial assets and financial liabilities within the group.
55 Similarly, the duration of the entity’s exposure to a particular market risk (or risks) arising from the financial assets and financial liabilities shall be substantially the same. For example, an entity that uses a 12‑month futures contract against the cash flows associated with 12 months’ worth of interest rate risk exposure on a five-year financial instrument within a group made up of only those financial assets and financial liabilities measures the fair value of the exposure to 12-month interest rate risk on a net basis and the remaining interest rate risk exposure (ie years 2–5) on a gross basis.
56 When using the exception in paragraph 48 to measure the fair value of a group of financial assets and financial liabilities entered into with a particular counterparty, the entity shall include the effect of the entity’s net exposure to the credit risk of that counterparty or the counterparty’s net exposure to the credit risk of the entity in the fair value measurement when market participants would take into account any existing arrangements that mitigate credit risk exposure in the event of default (eg a master netting agreement with the counterparty or an agreement that requires the exchange of collateral on the basis of each party’s net exposure to the credit risk of the other party). The fair value measurement shall reflect market participants’ expectations about the likelihood that such an arrangement would be legally enforceable in the event of default.
57 When an asset is acquired or a liability is assumed in an exchange transaction for that asset or liability, the transaction price is the price paid to acquire the asset or received to assume the liability (an entry price). In contrast, the fair value of the asset or liability is the price that would be received to sell the asset or paid to transfer the liability (an exit price). Entities do not necessarily sell assets at the prices paid to acquire them. Similarly, entities do not necessarily transfer liabilities at the prices received to assume them.
58 In many cases the transaction price will equal the fair value (eg that might be the case when on the transaction date the transaction to buy an asset takes place in the market in which the asset would be sold).
59 When determining whether fair value at initial recognition equals the transaction price, an entity shall take into account factors specific to the transaction and to the asset or liability. Paragraph B4 describes situations in which the transaction price might not represent the fair value of an asset or a liability at initial recognition.
60 If another Standard requires or permits an entity to measure an asset or a liability initially at fair value and the transaction price differs from fair value, the entity shall recognise the resulting gain or loss in profit or loss unless that Standard specifies otherwise.
61 An entity shall use valuation techniques that are appropriate in the circumstances and for which sufficient data are available to measure fair value, maximising the use of relevant observable inputs and minimising the use of unobservable inputs.
62 The objective of using a valuation technique is to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions. Three widely used valuation techniques are the market approach, the cost approach and the income approach. The main aspects of those approaches are summarised in paragraphs B5–B11. An entity shall use valuation techniques consistent with one or more of those approaches to measure fair value.
63 In some cases a single valuation technique will be appropriate (eg when valuing an asset or a liability using quoted prices in an active market for identical assets or liabilities). In other cases, multiple valuation techniques will be appropriate (eg that might be the case when valuing a cash-generating unit). If multiple valuation techniques are used to measure fair value, the results (ie respective indications of fair value) shall be evaluated considering the reasonableness of the range of values indicated by those results. A fair value measurement is the point within that range that is most representative of fair value in the circumstances.
64 If the transaction price is fair value at initial recognition and a valuation technique that uses unobservable inputs will be used to measure fair value in subsequent periods, the valuation technique shall be calibrated so that at initial recognition the result of the valuation technique equals the transaction price. Calibration ensures that the valuation technique reflects current market conditions, and it helps an entity to determine whether an adjustment to the valuation technique is necessary (eg there might be a characteristic of the asset or liability that is not captured by the valuation technique). After initial recognition, when measuring fair value using a valuation technique or techniques that use unobservable inputs, an entity shall ensure that those valuation techniques reflect observable market data (eg the price for a similar asset or liability) at the measurement date.
65 Valuation techniques used to measure fair value shall be applied consistently. However, a change in a valuation technique or its application (eg a change in its weighting when multiple valuation techniques are used or a change in an adjustment applied to a valuation technique) is appropriate if the change results in a measurement that is equally or more representative of fair value in the circumstances. That might be the case if, for example, any of the following events take place:
(a) new markets develop;
(b) new information becomes available;
(c) information previously used is no longer available;
(d) valuation techniques improve; or
(e) market conditions change.
66 Revisions resulting from a change in the valuation technique or its application shall be accounted for as a change in accounting estimate in accordance with AASB 108. However, the disclosures in AASB 108 for a change in accounting estimate are not required for revisions resulting from a change in a valuation technique or its application.
67 Valuation techniques used to measure fair value shall maximise the use of relevant observable inputs and minimise the use of unobservable inputs.
68 Examples of markets in which inputs might be observable for some assets and liabilities (eg financial instruments) include exchange markets, dealer markets, brokered markets and principal-to-principal markets (see paragraph B34).
69 An entity shall select inputs that are consistent with the characteristics of the asset or liability that market participants would take into account in a transaction for the asset or liability (see paragraphs 11 and 12). In some cases those characteristics result in the application of an adjustment, such as a premium or discount (eg a control premium or non-controlling interest discount). However, a fair value measurement shall not incorporate a premium or discount that is inconsistent with the unit of account in the Standard that requires or permits the fair value measurement (see paragraphs 13 and 14). Premiums or discounts that reflect size as a characteristic of the entity’s holding (specifically, a blockage factor that adjusts the quoted price of an asset or a liability because the market’s normal daily trading volume is not sufficient to absorb the quantity held by the entity, as described in paragraph 80) rather than as a characteristic of the asset or liability (eg a control premium when measuring the fair value of a controlling interest) are not permitted in a fair value measurement. In all cases, if there is a quoted price in an active market (ie a Level 1 input) for an asset or a liability, an entity shall use that price without adjustment when measuring fair value, except as specified in paragraph 79.
70 If an asset or a liability measured at fair value has a bid price and an ask price (eg an input from a dealer market), the price within the bid-ask spread that is most representative of fair value in the circumstances shall be used to measure fair value regardless of where the input is categorised within the fair value hierarchy (ie Level 1, 2 or 3; see paragraphs 72–90). The use of bid prices for asset positions and ask prices for liability positions is permitted, but is not required.
71 This Standard does not preclude the use of mid-market pricing or other pricing conventions that are used by market participants as a practical expedient for fair value measurements within a bid-ask spread.
72 To increase consistency and comparability in fair value measurements and related disclosures, this Standard establishes a fair value hierarchy that categorises into three levels (see paragraphs 76–90) the inputs to valuation techniques used to measure fair value. The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities (Level 1 inputs) and the lowest priority to unobservable inputs (Level 3 inputs).
73 In some cases, the inputs used to measure the fair value of an asset or a liability might be categorised within different levels of the fair value hierarchy. In those cases, the fair value measurement is categorised in its entirety in the same level of the fair value hierarchy as the lowest level input that is significant to the entire measurement. Assessing the significance of a particular input to the entire measurement requires judgement, taking into account factors specific to the asset or liability. Adjustments to arrive at measurements based on fair value, such as costs to sell when measuring fair value less costs to sell, shall not be taken into account when determining the level of the fair value hierarchy within which a fair value measurement is categorised.
74 The availability of relevant inputs and their relative subjectivity might affect the selection of appropriate valuation techniques (see paragraph 61). However, the fair value hierarchy prioritises the inputs to valuation techniques, not the valuation techniques used to measure fair value. For example, a fair value measurement developed using a present value technique might be categorised within Level 2 or Level 3, depending on the inputs that are significant to the entire measurement and the level of the fair value hierarchy within which those inputs are categorised.
75 If an observable input requires an adjustment using an unobservable input and that adjustment results in a significantly higher or lower fair value measurement, the resulting measurement would be categorised within Level 3 of the fair value hierarchy. For example, if a market participant would take into account the effect of a restriction on the sale of an asset when estimating the price for the asset, an entity would adjust the quoted price to reflect the effect of that restriction. If that quoted price is a Level 2 input and the adjustment is an unobservable input that is significant to the entire measurement, the measurement would be categorised within Level 3 of the fair value hierarchy.
76 Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets or liabilities that the entity can access at the measurement date.
77 A quoted price in an active market provides the most reliable evidence of fair value and shall be used without adjustment to measure fair value whenever available, except as specified in paragraph 79.
78 A Level 1 input will be available for many financial assets and financial liabilities, some of which might be exchanged in multiple active markets (eg on different exchanges). Therefore, the emphasis within Level 1 is on determining both of the following:
(a) the principal market for the asset or liability or, in the absence of a principal market, the most advantageous market for the asset or liability; and
(b) whether the entity can enter into a transaction for the asset or liability at the price in that market at the measurement date.
79 An entity shall not make an adjustment to a Level 1 input except in the following circumstances:
(a) when an entity holds a large number of similar (but not identical) assets or liabilities (eg debt securities) that are measured at fair value and a quoted price in an active market is available but not readily accessible for each of those assets or liabilities individually (ie given the large number of similar assets or liabilities held by the entity, it would be difficult to obtain pricing information for each individual asset or liability at the measurement date). In that case, as a practical expedient, an entity may measure fair value using an alternative pricing method that does not rely exclusively on quoted prices (eg matrix pricing). However, the use of an alternative pricing method results in a fair value measurement categorised within a lower level of the fair value hierarchy.
(b) when a quoted price in an active market does not represent fair value at the measurement date. That might be the case if, for example, significant events (such as transactions in a principal-to-principal market, trades in a brokered market or announcements) take place after the close of a market but before the measurement date. An entity shall establish and consistently apply a policy for identifying those events that might affect fair value measurements. However, if the quoted price is adjusted for new information, the adjustment results in a fair value measurement categorised within a lower level of the fair value hierarchy.
(c) when measuring the fair value of a liability or an entity’s own equity instrument using the quoted price for the identical item traded as an asset in an active market and that price needs to be adjusted for factors specific to the item or the asset (see paragraph 39). If no adjustment to the quoted price of the asset is required, the result is a fair value measurement categorised within Level 1 of the fair value hierarchy. However, any adjustment to the quoted price of the asset results in a fair value measurement categorised within a lower level of the fair value hierarchy.
80 If an entity holds a position in a single asset or liability (including a position comprising a large number of identical assets or liabilities, such as a holding of financial instruments) and the asset or liability is traded in an active market, the fair value of the asset or liability shall be measured within Level 1 as the product of the quoted price for the individual asset or liability and the quantity held by the entity. That is the case even if a market’s normal daily trading volume is not sufficient to absorb the quantity held and placing orders to sell the position in a single transaction might affect the quoted price.
81 Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly.
82 If the asset or liability has a specified (contractual) term, a Level 2 input must be observable for substantially the full term of the asset or liability. Level 2 inputs include the following:
(a) quoted prices for similar assets or liabilities in active markets.
(b) quoted prices for identical or similar assets or liabilities in markets that are not active.
(c) inputs other than quoted prices that are observable for the asset or liability, for example:
(i) interest rates and yield curves observable at commonly quoted intervals;
(ii) implied volatilities; and
(iii) credit spreads.
(d) market-corroborated inputs.
83 Adjustments to Level 2 inputs will vary depending on factors specific to the asset or liability. Those factors include the following:
(a) the condition or location of the asset;
(b) the extent to which inputs relate to items that are comparable to the asset or liability (including those factors described in paragraph 39); and
(c) the volume or level of activity in the markets within which the inputs are observed.
84 An adjustment to a Level 2 input that is significant to the entire measurement might result in a fair value measurement categorised within Level 3 of the fair value hierarchy if the adjustment uses significant unobservable inputs.
85 Paragraph B35 describes the use of Level 2 inputs for particular assets and liabilities.
86 Level 3 inputs are unobservable inputs for the asset or liability.
87 Unobservable inputs shall be used to measure fair value to the extent that relevant observable inputs are not available, thereby allowing for situations in which there is little, if any, market activity for the asset or liability at the measurement date. However, the fair value measurement objective remains the same, ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability. Therefore, unobservable inputs shall reflect the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk.
88 Assumptions about risk include the risk inherent in a particular valuation technique used to measure fair value (such as a pricing model) and the risk inherent in the inputs to the valuation technique. A measurement that does not include an adjustment for risk would not represent a fair value measurement if market participants would include one when pricing the asset or liability. For example, it might be necessary to include a risk adjustment when there is significant measurement uncertainty (eg when there has been a significant decrease in the volume or level of activity when compared with normal market activity for the asset or liability, or similar assets or liabilities, and the entity has determined that the transaction price or quoted price does not represent fair value, as described in paragraphs B37–B47).
89 An entity shall develop unobservable inputs using the best information available in the circumstances, which might include the entity’s own data. In developing unobservable inputs, an entity may begin with its own data, but it shall adjust those data if reasonably available information indicates that other market participants would use different data or there is something particular to the entity that is not available to other market participants (eg an entity-specific synergy). An entity need not undertake exhaustive efforts to obtain information about market participant assumptions. However, an entity shall take into account all information about market participant assumptions that is reasonably available. Unobservable inputs developed in the manner described above are considered market participant assumptions and meet the objective of a fair value measurement.
90 Paragraph B36 describes the use of Level 3 inputs for particular assets and liabilities.
91 An entity shall disclose information that helps users of its financial statements assess both of the following:
(a) for assets and liabilities that are measured at fair value on a recurring or non-recurring basis in the statement of financial position after initial recognition, the valuation techniques and inputs used to develop those measurements.
(b) for recurring fair value measurements using significant unobservable inputs (Level 3), the effect of the measurements on profit or loss or other comprehensive income for the period.
92 To meet the objectives in paragraph 91, an entity shall consider all the following:
(a) the level of detail necessary to satisfy the disclosure requirements;
(b) how much emphasis to place on each of the various requirements;
(c) how much aggregation or disaggregation to undertake; and
(d) whether users of financial statements need additional information to evaluate the quantitative information disclosed.
If the disclosures provided in accordance with this Standard and other Australian Accounting Standards are insufficient to meet the objectives in paragraph 91, an entity shall disclose additional information necessary to meet those objectives.
93 To meet the objectives in paragraph 91, an entity shall disclose, at a minimum, the following information for each class of assets and liabilities (see paragraph 94 for information on determining appropriate classes of assets and liabilities) measured at fair value (including measurements based on fair value within the scope of this Standard) in the statement of financial position after initial recognition:
(a) for recurring and non-recurring fair value measurements, the fair value measurement at the end of the reporting period, and for non-recurring fair value measurements, the reasons for the measurement. Recurring fair value measurements of assets or liabilities are those that other Australian Accounting Standards require or permit in the statement of financial position at the end of each reporting period. Non-recurring fair value measurements of assets or liabilities are those that other Australian Accounting Standards require or permit in the statement of financial position in particular circumstances (eg when an entity measures an asset held for sale at fair value less costs to sell in accordance with AASB 5 Non-current Assets Held for Sale and Discontinued Operations because the asset’s fair value less costs to sell is lower than its carrying amount).
(b) for recurring and non-recurring fair value measurements, the level of the fair value hierarchy within which the fair value measurements are categorised in their entirety (Level 1, 2 or 3).
(c) for assets and liabilities held at the end of the reporting period that are measured at fair value on a recurring basis, the amounts of any transfers between Level 1 and Level 2 of the fair value hierarchy, the reasons for those transfers and the entity’s policy for determining when transfers between levels are deemed to have occurred (see paragraph 95). Transfers into each level shall be disclosed and discussed separately from transfers out of each level.
(d) for recurring and non-recurring fair value measurements categorised within Level 2 and Level 3 of the fair value hierarchy, a description of the valuation technique(s) and the inputs used in the fair value measurement. If there has been a change in valuation technique (eg changing from a market approach to an income approach or the use of an additional valuation technique), the entity shall disclose that change and the reason(s) for making it. For fair value measurements categorised within Level 3 of the fair value hierarchy, an entity shall provide quantitative information about the significant unobservable inputs used in the fair value measurement. An entity is not required to create quantitative information to comply with this disclosure requirement if quantitative unobservable inputs are not developed by the entity when measuring fair value (eg when an entity uses prices from prior transactions or third-party pricing information without adjustment). However, when providing this disclosure an entity cannot ignore quantitative unobservable inputs that are significant to the fair value measurement and are reasonably available to the entity.
(e) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy, a reconciliation from the opening balances to the closing balances, disclosing separately changes during the period attributable to the following:
(i) total gains or losses for the period recognised in profit or loss, and the line item(s) in profit or loss in which those gains or losses are recognised.
(ii) total gains or losses for the period recognised in other comprehensive income, and the line item(s) in other comprehensive income in which those gains or losses are recognised.
(iii) purchases, sales, issues and settlements (each of those types of changes disclosed separately).
(iv) the amounts of any transfers into or out of Level 3 of the fair value hierarchy, the reasons for those transfers and the entity’s policy for determining when transfers between levels are deemed to have occurred (see paragraph 95). Transfers into Level 3 shall be disclosed and discussed separately from transfers out of Level 3.
(f) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy, the amount of the total gains or losses for the period in (e)(i) included in profit or loss that is attributable to the change in unrealised gains or losses relating to those assets and liabilities held at the end of the reporting period, and the line item(s) in profit or loss in which those unrealised gains or losses are recognised.
(g) for recurring and non-recurring fair value measurements categorised within Level 3 of the fair value hierarchy, a description of the valuation processes used by the entity (including, for example, how an entity decides its valuation policies and procedures and analyses changes in fair value measurements from period to period).
(h) for recurring fair value measurements categorised within Level 3 of the fair value hierarchy:
(i) for all such measurements, a narrative description of the sensitivity of the fair value measurement to changes in unobservable inputs if a change in those inputs to a different amount might result in a significantly higher or lower fair value measurement. If there are interrelationships between those inputs and other unobservable inputs used in the fair value measurement, an entity shall also provide a description of those interrelationships and of how they might magnify or mitigate the effect of changes in the unobservable inputs on the fair value measurement. To comply with that disclosure requirement, the narrative description of the sensitivity to changes in unobservable inputs shall include, at a minimum, the unobservable inputs disclosed when complying with (d).
(ii) for financial assets and financial liabilities, if changing one or more of the unobservable inputs to reflect reasonably possible alternative assumptions would change fair value significantly, an entity shall state that fact and disclose the effect of those changes. The entity shall disclose how the effect of a change to reflect a reasonably possible alternative assumption was calculated. For that purpose, significance shall be judged with respect to profit or loss, and total assets or total liabilities, or, when changes in fair value are recognised in other comprehensive income, total equity.
(i) for recurring and non-recurring fair value measurements, if the highest and best use of a non-financial asset differs from its current use, an entity shall disclose that fact and why the non-financial asset is being used in a manner that differs from its highest and best use.
Aus93.1 Notwithstanding paragraph 93, in respect of not-for-profit public sector entities, for assets within the scope of AASB 116 Property, Plant and Equipment for which the future economic benefits are not primarily dependent on the asset’s ability to generate net cash inflows, the following requirements do not apply:
(a) in paragraph 93(d), the text “For fair value measurements categorised within Level 3 of the fair value hierarchy, an entity shall provide quantitative information about the significant unobservable inputs used in the fair value measurement. An entity is not required to create quantitative information to comply with this disclosure requirement if quantitative unobservable inputs are not developed by the entity when measuring fair value (eg when an entity uses prices from prior transactions or third-party pricing information without adjustment). However, when providing this disclosure an entity cannot ignore quantitative unobservable inputs that are significant to the fair value measurement and are reasonably available to the entity.”;
(b) paragraph 93(f); and
(c) paragraph 93(h)(i).
94 An entity shall determine appropriate classes of assets and liabilities on the basis of the following:
(a) the nature, characteristics and risks of the asset or liability; and
(b) the level of the fair value hierarchy within which the fair value measurement is categorised.
The number of classes may need to be greater for fair value measurements categorised within Level 3 of the fair value hierarchy because those measurements have a greater degree of uncertainty and subjectivity. Determining appropriate classes of assets and liabilities for which disclosures about fair value measurements should be provided requires judgement. A class of assets and liabilities will often require greater disaggregation than the line items presented in the statement of financial position. However, an entity shall provide information sufficient to permit reconciliation to the line items presented in the statement of financial position. If another Standard specifies the class for an asset or a liability, an entity may use that class in providing the disclosures required in this Standard if that class meets the requirements in this paragraph.
95 An entity shall disclose and consistently follow its policy for determining when transfers between levels of the fair value hierarchy are deemed to have occurred in accordance with paragraph 93(c) and (e)(iv). The policy about the timing of recognising transfers shall be the same for transfers into the levels as for transfers out of the levels. Examples of policies for determining the timing of transfers include the following:
(a) the date of the event or change in circumstances that caused the transfer.
(b) the beginning of the reporting period.
(c) the end of the reporting period.
96 If an entity makes an accounting policy decision to use the exception in paragraph 48, it shall disclose that fact.
97 For each class of assets and liabilities not measured at fair value in the statement of financial position but for which the fair value is disclosed, an entity shall disclose the information required by paragraph 93(b), (d) and (i). However, an entity is not required to provide the quantitative disclosures about significant unobservable inputs used in fair value measurements categorised within Level 3 of the fair value hierarchy required by paragraph 93(d). For such assets and liabilities, an entity does not need to provide the other disclosures required by this Standard.
98 For a liability measured at fair value and issued with an inseparable third-party credit enhancement, an issuer shall disclose the existence of that credit enhancement and whether it is reflected in the fair value measurement of the liability.
99 An entity shall present the quantitative disclosures required by this Standard in a tabular format unless another format is more appropriate.
27 A fair value measurement of a non-financial asset takes into account a market participant’s ability to generate economic benefits by using the asset in its highest and best use or by selling it to another market participant that would use the asset in its highest and best use.
28 The highest and best use of a non-financial asset takes into account the use of the asset that is physically possible, legally permissible and financially feasible, as follows:
(a) A use that is physically possible takes into account the physical characteristics of the asset that market participants would take into account when pricing the asset (eg the location or size of a property).
(b) A use that is legally permissible takes into account any legal restrictions on the use of the asset that market participants would take into account when pricing the asset (eg the zoning regulations applicable to a property).
(c) A use that is financially feasible takes into account whether a use of the asset that is physically possible and legally permissible generates adequate income or cash flows (taking into account the costs of converting the asset to that use) to produce an investment return that market participants would require from an investment in that asset put to that use.
29 Highest and best use is determined from the perspective of market participants, even if the entity intends a different use. However, an entity’s current use of a non-financial asset is presumed to be its highest and best use unless market or other factors suggest that a different use by market participants would maximise the value of the asset.
30 To protect its competitive position, or for other reasons, an entity may intend not to use an acquired non-financial asset actively or it may intend not to use the asset according to its highest and best use. For example, that might be the case for an acquired intangible asset that the entity plans to use defensively by preventing others from using it. Nevertheless, the entity shall measure the fair value of a non-financial asset assuming its highest and best use by market participants.
Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.
Compiled versions of Standards, original Standards and amending Standards (see Compilation Details) are available on the AASB website: www.aasb.gov.au.
| Australian Accounting Standards BoardPO Box 204Collins Street WestVictoria 8007AUSTRALIA | |
|---|---|
| Phone: (03) 9617 7637E-mail: publications@aasb.gov.auWebsite: www.aasb.gov.au |
Phone: (03) 9617 7600
E-mail: standard@aasb.gov.au
COPYRIGHT
© 2016 Commonwealth of Australia
This compiled AASB Standard contains IFRS Foundation copyright material. Reproduction within Australia in unaltered form (retaining this notice) is permitted for personal and non-commercial use subject to the inclusion of an acknowledgment of the source. Requests and enquiries concerning reproduction and rights for commercial purposes within Australia should be addressed to The Director of Finance and Administration, Australian Accounting Standards Board, PO Box 204, Collins Street West, Victoria 8007.
All existing rights in this material are reserved outside Australia.
Reproduction outside Australia in unaltered form (retaining this notice) is permitted for personal and non-commercial use only. Further information and requests for authorisation to reproduce for commercial purposes outside Australia should be addressed to the IFRS Foundation at www.ifrs.org.
COMPILATION DETAILS
Comparison with IFRS 13
INTRODUCTION TO IFRS 13
(available on the AASB website)
Accounting Standard
AASB 13 Fair Value Measurement
Paragraphs
Objective 1 – 4
Application Aus4.1 – Aus4.3
Reduced disclosure requirements Aus4.5 – Aus4.6
Scope 5 – 8
Measurement
Definition of fair value 9 – 10
The asset or liability 11 – 14
The transaction 15 – 21
Market participants 22 – 23
The price 24 – 26
Application to non-financial assets
Highest and best use for non-financial assets 27 – 30
Valuation premise for non-financial assets 31 – 33
Application to liabilities and an entity’s own equity instruments
General principles 34 – 36
Liabilities and equity instruments held by other parties as assets 37 – 39
Liabilities and equity instruments not held by other parties as assets 40 – 41
Non-performance risk 42 – 44
Restriction preventing the transfer of a liability or an entity’s own equity instrument 45 – 46
Financial liability with a demand feature 47
Application to financial assets and financial liabilities with offsetting positions in market risks or counterparty credit risk 48 – 52
Exposure to market risks 53 – 55
Exposure to the credit risk of a particular counterparty 56
Fair value at initial recognition 57 – 60
Valuation techniques 61 – 66
Inputs to valuation techniques
General principles 67 – 69
Inputs based on bid and ask prices 70 – 71
Fair value hierarchy 72 – 75
Level 1 inputs 76 – 80
Level 2 inputs 81 – 85
Level 3 inputs 86 – 90
Disclosure 91 – 99
Appendices:
A. Defined Terms Page 20
B. Application Guidance Page 22
C. Effective Date and Transition Page 32
DELETED IFRS 13 TEXT Page 33
ILLUSTRATIVE EXAMPLES
(available on the AASB website)
BASIS FOR CONCLUSIONS ON IFRS 13
(available on the AASB website)
Australian Accounting Standard AASB 13 Fair Value Measurement (as amended) is set out in paragraphs 1 – 99 and Appendices A – C. All the paragraphs have equal authority. Paragraphs in bold type state the main principles. Terms defined in Appendix A are in italics the first time they appear in the Standard. AASB 13 is to be read in the context of other Australian Accounting Standards, including AASB 1048 Interpretation of Standards, which identifies the Australian Accounting Interpretations. In the absence of explicit guidance, AASB 108 Accounting Policies, Changes in Accounting Estimates and Errors provides a basis for selecting and applying accounting policies.
This compiled Standard applies to annual reporting periods beginning on or after 1 January 2018. It takes into account amendments up to and including 8 July 2015 and was prepared on 6 June 2016 by the staff of the Australian Accounting Standards Board (AASB).
This compilation is not a separate Accounting Standard made by the AASB. Instead, it is a representation of AASB 13 (September 2011) as amended by other Accounting Standards, which are listed in the Table below.
| Standard | Date made | Application date(annual reporting periods … on or after …) | Application, saving or transitional provisions |
|---|---|---|---|
| AASB 13 | 2 Sep 2011 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2012-1 | 21 Mar 2012 | (beginning) 1 Jul 2013 | see (b) below |
| AASB 2012-10 | 18 Dec 2012 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2014-1 | 4 Jun 2014 | Pt A (beginning) 1 Jul 2014Pt C (beginning) 1 Jul 2014 | see (c) belowsee (d) below |
| AASB 2014-7 | 17 Dec 2014 | (beginning) 1 Jan 2018 | see (e) below |
| AASB 2015-7 | 8 July 2015 | (beginning) 1 Jul 2016 | see (f) below |
(a) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013.
(b) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 July 2009 but before 1 July 2013, provided that AASB 1053 Application of Tiers of Australian Accounting Standards, AASB 13 Fair Value Measurement and AASB 2011-8 Amendments to Australian Accounting Standards arising from AASB 13 are also applied to such periods.
(c) Entities may elect to apply Part A of this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2014.
(d) Entities may elect to apply Part C of this Standard to annual reporting periods beginning on or after 1 January 2014 but before 1 July 2014.
(e) Entities may elect to apply this Standard to annual reporting periods beginning on or after 24 July 2014 but before 1 January 2018, provided that AASB 9 Financial Instruments (2014) is also applied to such periods.
(f) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2016.
| Paragraph affected | How affected | By … [paragraph] |
|---|---|---|
| Aus4.4 | deleted | AASB 2014-1C [49, 50] |
| Aus4.5-Aus4.6 (and preceding heading) | added | AASB 2012-1 [8] |
| 27 | amended | AASB 2014-1A [35] |
| 48 | amended | AASB 2012-10 [43] |
| 52 | amendedamended | AASB 2014-1A [23]AASB 2014-7 [34] |
| Aus93.1 | added | AASB 2015-7 [5] |
| B13 | amended | AASB 2014-1A [35] |
| B31 | amended | AASB 2014-1A [35] |
| C4 | added | AASB 2014-1A [23] |
| C5 | added | AASB 2014-7 [34] |
This compiled Standard applies to annual reporting periods beginning on or after 1 January 2018. It takes into account amendments up to and including 8 July 2015 and was prepared on 6 June 2016 by the staff of the Australian Accounting Standards Board (AASB).
This compilation is not a separate Accounting Standard made by the AASB. Instead, it is a representation of AASB 13 (September 2011) as amended by other Accounting Standards, which are listed in the Table below.
| Standard | Date made | Application date(annual reporting periods … on or after …) | Application, saving or transitional provisions |
|---|---|---|---|
| AASB 13 | 2 Sep 2011 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2012-1 | 21 Mar 2012 | (beginning) 1 Jul 2013 | see (b) below |
| AASB 2012-10 | 18 Dec 2012 | (beginning) 1 Jan 2013 | see (a) below |
| AASB 2014-1 | 4 Jun 2014 | Pt A (beginning) 1 Jul 2014Pt C (beginning) 1 Jul 2014 | see (c) belowsee (d) below |
| AASB 2014-7 | 17 Dec 2014 | (beginning) 1 Jan 2018 | see (e) below |
| AASB 2015-7 | 8 July 2015 | (beginning) 1 Jul 2016 | see (f) below |
(a) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 January 2013.
(b) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 July 2009 but before 1 July 2013, provided that AASB 1053 Application of Tiers of Australian Accounting Standards, AASB 13 Fair Value Measurement and AASB 2011-8 Amendments to Australian Accounting Standards arising from AASB 13 are also applied to such periods.
(c) Entities may elect to apply Part A of this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2014.
(d) Entities may elect to apply Part C of this Standard to annual reporting periods beginning on or after 1 January 2014 but before 1 July 2014.
(e) Entities may elect to apply this Standard to annual reporting periods beginning on or after 24 July 2014 but before 1 January 2018, provided that AASB 9 Financial Instruments (2014) is also applied to such periods.
(f) Entities may elect to apply this Standard to annual reporting periods beginning on or after 1 January 2005 but before 1 July 2016.
| Paragraph affected | How affected | By … [paragraph] |
|---|---|---|
| Aus4.4 | deleted | AASB 2014-1C [49, 50] |
| Aus4.5-Aus4.6 (and preceding heading) | added | AASB 2012-1 [8] |
| 27 | amended | AASB 2014-1A [35] |
| 48 | amended | AASB 2012-10 [43] |
| 52 | amendedamended | AASB 2014-1A [23]AASB 2014-7 [34] |
| Aus93.1 | added | AASB 2015-7 [5] |
| B13 | amended | AASB 2014-1A [35] |
| B31 | amended | AASB 2014-1A [35] |
| C4 | added | AASB 2014-1A [23] |
| C5 | added | AASB 2014-7 [34] |
AASB 13 Fair Value Measurement as amended incorporates IFRS 13 Fair Value Measurement as issued and amended by the International Accounting Standards Board (IASB). Paragraphs that have been added to this Standard (and do not appear in the text of IFRS 13) are identified with the prefix “Aus”, followed by the number of the preceding IASB paragraph and decimal numbering.
Entities that comply with AASB 13 as amended will simultaneously be in compliance with IFRS 13 as amended, with the exception of entities preparing general purpose financial statements under Australian Accounting Standards – Reduced Disclosure Requirements.
The Australian Accounting Standards Board made Accounting Standard AASB 13 Fair Value Measurement under section 334 of the Corporations Act 2001 on 2 September 2011.
This compiled version of AASB 13 applies to annual reporting periods beginning on or after 1 January 2018. It incorporates relevant amendments contained in other AASB Standards made by the AASB up to and including 8 July 2015 (see Compilation Details).
Fair Value Measurement
1 This Standard:
(a) defines fair value;
(b) sets out in a single Standard a framework for measuring fair value; and
(c) requires disclosures about fair value measurements.
2 Fair value is a market-based measurement, not an entity-specific measurement. For some assets and liabilities, observable market transactions or market information might be available. For other assets and liabilities, observable market transactions and market information might not be available. However, the objective of a fair value measurement in both cases is the same – to estimate the price at which an orderly transaction to sell the asset or to transfer the liability would take place between market participants at the measurement date under current market conditions (ie an exit price at the measurement date from the perspective of a market participant that holds the asset or owes the liability).
3 When a price for an identical asset or liability is not observable, an entity measures fair value using another valuation technique that maximises the use of relevant observable inputs and minimises the use of unobservable inputs. Because fair value is a market-based measurement, it is measured using the assumptions that market participants would use when pricing the asset or liability, including assumptions about risk. As a result, an entity’s intention to hold an asset or to settle or otherwise fulfil a liability is not relevant when measuring fair value.
4 The definition of fair value focuses on assets and liabilities because they are a primary subject of accounting measurement. In addition, this Standard shall be applied to an entity’s own equity instruments measured at fair value.
Aus4.1 This Standard applies to:
(a) each entity that is required to prepare financial reports in accordance with Part 2M.3 of the Corporations Act and that is a reporting entity;
(b) general purpose financial statements of each other reporting entity; and
(c) financial statements that are, or are held out to be, general purpose financial statements.
Aus4.2 This Standard applies to annual reporting periods beginning on or after 1 January 2013.
[Note: For application dates of paragraphs cha
This is an opening excerpt, not the complete document.