529GNotification of particular processing of engineered stone

529G  Notification of particular processing of engineered stone  (1) This regulation applies if work that involves processing engineered stone benchtops, panels or slabs is carried out:  (a) to remove, repair or make minor modifications to installed engineered stone; or  (b) to dispose of the engineered stone, whether it is installed or not.  (2) Before the work is carried out, a person conducting a business or undertaking carrying out, or directing or allowing a worker to carry out, the work must give the regulator a written notice in the form approved by the regulator:  (a) stating the work being carried out; and  (b) describing the type of work being carried out; and  (c) stating the frequency and duration of the work; and  (d) stating the other information in relation to the work required by the approved form, if any. Note: Section 12F of the Act provides that strict liability applies to each physical element of each offence under the Act, unless otherwise stated. The reference in section 12F of the Act includes these Regulations.  (3) Subregulation (2) does not apply to a person conducting a business or undertaking if:  (a) the person conducting a business or undertaking does not know, and could not reasonably be expected to know, before the work is carried out that the work involves processing engineered stone benchtops, panels or slabs; and  (b) as soon as practicable after the person conducting the business or undertaking becomes aware that the work involves processing engineered stone benchtops, panels or slabs, the person gives the regulator a written notice under subregulation (2) in relation to the work.  (4) If the regulator receives a notice under subregulation (2) or (3), the regulator must give the person conducting the business or undertaking an acknowledgement of receipt of the notice.