477Removing friable asbestos

477 Removing friable asbestos

477 Removing friable asbestos

(1) A licensed asbestos removalist removing friable asbestos must ensure, so far as is reasonably practicable, the following—

(a) the asbestos removal area is enclosed to prevent the release of respirable asbestos fibres,

(b) subject to subsection (3), negative pressure is used,

(c) the wet method of asbestos removal is used,

(d) subject to subsection (3), the asbestos removal work does not commence until the air monitoring is commenced by a licensed asbestos assessor,

(e) air monitoring is undertaken during the asbestos removal work, at times decided by the independent licensed asbestos assessor undertaking the monitoring,

(f) a glove bag used to enclose the asbestos removal area is dismantled and disposed of safely.

Maximum penalty—

(a) for an individual—73 penalty units, or

(b) for a body corporate—364 penalty units.

(2) A licensed asbestos removalist must ensure that an enclosure used in removing friable asbestos is tested for leaks.

Maximum penalty—

(a) for an individual—73 penalty units, or

(b) for a body corporate—364 penalty units.

(3) Subsections (1)(b) and (1)(d) do not apply if glove bags are used in the Class A asbestos removal work.

(4) The licensed removalist must not dismantle an enclosure for a friable asbestos removal area until the removalist receives results of air monitoring, showing that the recorded respirable asbestos fibre level within the enclosure is below 0.01 fibres/mL, from—

(a) if the friable asbestos is removed from residential premises—the licensed asbestos assessor who undertook the air monitoring, or

(b) otherwise—the person who commissioned the Class A asbestos removal work.

Maximum penalty—

(a) for an individual—73 penalty units, or

(b) for a body corporate—364 penalty units.