NTIn ForceRegulation
WORK HEALTH AND SAFETY (NATIONAL UNIFORM LEGISLATION) REGULATIONS 2011
221Plant used in connection with tree lopping
Start here
Get a plain-English read of 221
Turn the raw legal text into a practical explanation grounded in WORK HEALTH AND SAFETY (NATIONAL UNIFORM LEGISLATION) REGULATIONS 2011.
221 Plant used in connection with tree lopping
(1) Regulation 220(1)(a) and (b) do not apply in connection with tree
lopping if:
(a) a risk assessment shows that lifting or suspending a person in
a harness with a crane to place the person in a tree to carry
out tree lopping does not create a greater risk to health or
safety than using plant specifically designed to lift a person or
climbing a tree; and
(b) the tree lopping is carried out by a person who is a competent
person in the use of the harness referred to in paragraph (a);
and
(c) a crane is used to put the competent person in the tree to lop
it; and
(d) the crane has safety mechanisms that would prevent the
competent person from inadvertently falling; and
(e) while attached to the crane, the competent person is in visual,
audio or radio communication with the crane operator.
harness means a work positioning harness that is designed and
certified, in accordance with AS/NZS 1891.1:2020 (Personal
equipment for work at height – Manufacturing requirements for full
body combination and lower body harnesses), for the purpose of
lifting and suspending a person.