sch.4-sec.3Bolt action rifle

sch.4-sec.3 Bolt action rifle

A bolt action rifle that has a calibre of .50 or less may be modified to make it permanently incapable of being discharged by doing all of the following— boring a calibre size hole in the chamber; inserting a close fitting steel rod, extending from the muzzle to the breech, in the barrel and welding at the muzzle and breech; completely breaking off, grinding off or removing the firing pin; welding the trigger to the receiver; welding the bolt to the receiver either— through the magazine well or the ejection port; or along the exposed surface of the bolt for at least 80% of the bolt’s length; cutting off the magazine lips and removing the spring and follower; if the rifle has a quick detachable barrel—welding the barrel to the receiver; if the rifle has a tube type magazine—cutting off the crimped end of the guide, if any, and removing the spring and follower. A bolt action rifle that has a calibre of more than .50 may be modified to make it permanently incapable of being discharged by welding it in accordance with the deactivating guide. sch 4 s 3 amd 2017 SL No. 117 s 16 (sch.4-sec.3-ssec.1) A bolt action rifle that has a calibre of .50 or less may be modified to make it permanently incapable of being discharged by doing all of the following— boring a calibre size hole in the chamber; inserting a close fitting steel rod, extending from the muzzle to the breech, in the barrel and welding at the muzzle and breech; completely breaking off, grinding off or removing the firing pin; welding the trigger to the receiver; welding the bolt to the receiver either— through the magazine well or the ejection port; or along the exposed surface of the bolt for at least 80% of the bolt’s length; cutting off the magazine lips and removing the spring and follower; if the rifle has a quick detachable barrel—welding the barrel to the receiver; if the rifle has a tube type magazine—cutting off the crimped end of the guide, if any, and removing the spring and follower. (sch.4-sec.3-ssec.2) A bolt action rifle that has a calibre of more than .50 may be modified to make it permanently incapable of being discharged by welding it in accordance with the deactivating guide.

• (a) boring a calibre size hole in the chamber;
• (b) inserting a close fitting steel rod, extending from the muzzle to the breech, in the barrel and welding at the muzzle and breech;
• (c) completely breaking off, grinding off or removing the firing pin;
• (d) welding the trigger to the receiver;
• (e) welding the bolt to the receiver either— (i) through the magazine well or the ejection port; or (ii) along the exposed surface of the bolt for at least 80% of the bolt’s length;
• (i) through the magazine well or the ejection port; or
• (ii) along the exposed surface of the bolt for at least 80% of the bolt’s length;