QLDIn ForceRegulation
Weapons Regulation 2016
sch.4-sec.11Revolver
Start here
Get a plain-English read of sch.4-sec.11
Turn the raw legal text into a practical explanation grounded in Weapons Regulation 2016.
sch.4-sec.11 Revolver
A revolver may be modified to make it permanently incapable of being discharged by doing all of the following— boring a calibre size hole in the barrel as close to the forcing cone as possible; inserting a close fitting steel rod in the barrel and cylinder and welding at the muzzle; welding the trigger and hammer to the frame; welding the cylinder to the frame; if the remover is a break type—welding the top strap closed.
- (a) boring a calibre size hole in the barrel as close to the forcing cone as possible;
- (b) inserting a close fitting steel rod in the barrel and cylinder and welding at the muzzle;
- (c) welding the trigger and hammer to the frame;
- (d) welding the cylinder to the frame;
- (e) if the remover is a break type—welding the top strap closed.