Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Australian Capital Territory
Water and Sewerage Regulation 2001
SL2001-2
made under the
Water and Sewerage Act 2000
Republication No 24
Effective: 26 November 2025
Republication date: 26 November 2025
Last amendment made by A2025-29
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
About this republication
The republished law
This is a republication of the Water and Sewerage Regulation 2001, made under the Water and
Sewerage Act 2000 (including any amendment made under the Legislation Act 2001, part 11.3
(Editorial changes)) as in force on 26 November 2025. It also includes any commencement,
amendment, repeal or expiry affecting this republished law to 26 November 2025.
The legislation history and amendment history of the republished law are set out in endnotes 3
and 4.
Kinds of republications
The Parliamentary Counsel’s Office prepares 2 kinds of republications of ACT laws (see the ACT
legislation register at www.legislation.act.gov.au):
• authorised republications to which the Legislation Act 2001 applies
• unauthorised republications.
The status of this republication appears on the bottom of each page.
Editorial changes
The Legislation Act 2001, part 11.3 authorises the Parliamentary Counsel to make editorial
amendments and other changes of a formal nature when preparing a law for republication.
Editorial changes do not change the effect of the law, but have effect as if they had been made by
an Act commencing on the republication date (see Legislation Act 2001, s 115 and s 117). The
changes are made if the Parliamentary Counsel considers they are desirable to bring the law into
line, or more closely into line, with current legislative drafting practice.
This republication includes amendments made under part 11.3 (see endnote 1).
Uncommenced provisions and amendments
If a provision of the republished law has not commenced, the symbol U appears immediately
before the provision heading. Any uncommenced amendments that affect this republished law
are accessible on the ACT legislation register (www.legislation.act.gov.au). For more
information, see the home page for this law on the register.
Modifications
If a provision of the republished law is affected by a current modification, the
symbol M appears immediately before the provision heading. The text of the modifying
provision appears in the endnotes. For the legal status of modifications, see the Legislation
Act 2001, section 95.
Penalties
At the republication date, the value of a penalty unit for an offence against this law is $160 for an
individual and $810 for a corporation (see Legislation Act 2001, s 133).
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
contents 1
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Australian Capital Territory
Water and Sewerage Regulation 2001
made under the
Water and Sewerage Act 2000
Contents
Page
Part 1 Preliminary
1 Name of regulation 2
3 Dictionary 2
4 Notes 2
5 Construction of standards consistent with regulation 2
5A Offences against regulation—application of Criminal Code etc 3
Part 2 Sanitary plumbing and sanitary drainage
6 Sanitary plumbing and sanitary drainage—work to conform to
plumbing code 4
7 Work to conform to approved plan 4
Contents
Page
contents 2 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
7A Notice of plan approval—Act, s 8 (5) 5
7B No reconsideration for plan amendment—Act, s 9 (3) 5
8 Notice to be given about work done 6
9 Testing of sanitary plumbing and drains 7
10 Notification after completion of work 7
12 Separate drainage systems 8
13 Disconnecting combined drainage systems 9
14 Cover to interceptor traps and accessholes 9
15 Rain and surface waters not to be discharged into sewers etc 10
16 Requirements for toilets—Act, s 17 (1) (b) 10
16A Building in separated sanitary drainage for grey water 12
16B Preservation of separated sanitary drainage for grey water 14
16C Overflow from grey water disposal system 14
16D Retrofitting backflow prevention devices 15
Part 3 Water supply
16E Water efficiency requirements—water supply and sanitary plumbing
work—Act, s 17A (1) (b) 17
17 Notice about work on water service 18
18 Water supply—work to conform to plumbing code 18
19 Inspection of work etc 19
20 Testing of water plumbing 19
21 Notification after completion of work—water services 20
22 Backflow prevention device 20
23 Water pumping appliance not to be connected without permission 22
24 Connecting pipe with steam-boilers 23
24A Building in separated rainwater supply service 23
24B Installing rainwater supply service 25
Part 4 Certificates of compliance
25 Certificate of compliance 26
Part 5 Notification and review of decisions
26 Reviewable decisions—Act, s 44, def reviewable decision 27
27 Right of review and notice—Act, s 44A and s 44B (a) 27
Contents
Page
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
contents 3
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 6 Plumbing code
28 Documents forming part of plumbing code—Act, s 44C (1), def
plumbing code, par (b) 28
Schedule 1 Reviewable decisions 29
Dictionary 30
Endnotes
1 About the endnotes 33
2 Abbreviation key 33
3 Legislation history 34
4 Amendment history 37
5 Earlier republications 42
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 1
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Australian Capital Territory
Water and Sewerage Regulation 2001
made under the
Water and Sewerage Act 2000
Part 1 Preliminary
Section 1
page 2 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 1 Preliminary
1 Name of regulation
This regulation is the Water and Sewerage Regulation 2001.
3 Dictionary
The dictionary at the end of this regulation is part of this regulation.
Note 1 The dictionary at the end of this regulation defines certain terms used in
this regulation.
Note 2 A definition in the dictionary applies to the entire regulation unless the
definition, or another provision of the regulation, provides otherwise or
the contrary intention otherwise appears (see Legislation Act, s 155 and
s 156 (1)).
4 Notes
A note included in this regulation is explanatory and is not part of this
regulation.
Note See the Legislation Act, s 127 (1), (4) and (5) for the legal status of notes.
5 Construction of standards consistent with regulation
(1) The standards mentioned in this regulation are to be applied in a way
that is consistent with this regulation, unless the contrary appears
from this regulation.
(2) A standard is to be taken to be consistent with this regulation to the
extent that it is capable of operating concurrently with this regulation.
Preliminary Part 1
Section 5A
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 3
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
5A Offences against regulation—application of Criminal
Code etc
Other legislation applies to an offence against this regulation.
Note 1 Criminal Code
The Criminal Code, ch 2 applies to the following offences against this
regulation (see Code, pt 2.1):
• s 16A-s 16D
• s 24A
• s 24B
The chapter sets out the general principles of criminal responsibility
(including burdens of proof and general defences), and defines terms used
for offences to which the Code applies (eg conduct, intention,
recklessness and strict liability).
Note 2 Penalty units
The Legislation Act, s 133 deals with the meaning of offence penalties
that are expressed in penalty units.
Part 2 Sanitary plumbing and sanitary drainage
Section 6
page 4 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 2 Sanitary plumbing and sanitary
drainage
6 Sanitary plumbing and sanitary drainage—work to
conform to plumbing code
(1) A person must not do work on a sanitary plumbing system or sanitary
drainage system that communicates with the sewerage system unless
the work is done in accordance with the requirements of the plumbing
code.
Maximum penalty: 10 penalty units.
(2) A person must not install plumbing and drainage products in a
sanitary plumbing system or sanitary drainage system that
communicates with the sewerage system unless the work is done in
accordance with the requirements of the plumbing code.
Maximum penalty: 10 penalty units.
(3) Subsections (1) and (2) do not apply if—
(a) the requirements of the plumbing code are inconsistent with
standards mentioned in this regulation; and
(b) the work was done in accordance with this regulation.
7 Work to conform to approved plan
(1) A person must not do work on a sanitary plumbing system or a
sanitary drainage system unless the work is done in accordance with
the plan approved by the certifier under the Act, section 8 (Issue of
plan approvals).
Maximum penalty: 10 penalty units.
(2) Subsection (1) does not apply to work on a sanitary plumbing system
or a sanitary drainage system for a single residential building.
Sanitary plumbing and sanitary drainage Part 2
Section 7A
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 5
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
7A Notice of plan approval—Act, s 8 (5)
The notice must contain the following information:
(a) the address of the land from which the raw or treated sewage, or
by-product, is to be discharged;
(b) the kind of discharge and how much is expected to be
discharged;
(c) the number and kind of sanitary fixtures that are likely to
contribute to the discharge;
(d) a description of any treatment or storage of the discharge before
its discharge;
(e) details of where and how the sewage will discharge, including
details of any irrigation system, water reuse system, septic
tanking system, absorption system, discharge into drainage
systems or other discharge system.
7B No reconsideration for plan amendment—Act, s 9 (3)
(1) A proposed amendment to a plan does not require reconsideration of
the plan approval if the only amendment to the plan is to the length
and alignment of pipework only.
(2) However, subsection (1) does not apply if the amendment would—
(a) change the point of connection of the pipework to an outlet,
fixture or appliance; or
(b) change the point of connection of the pipework to a sewage
network or its primary water supply; or
(c) increase the branching of the pipework; or
(d) add a run of pipework not shown in the plan.
Part 2 Sanitary plumbing and sanitary drainage
Section 8
page 6 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
8 Notice to be given about work done
(1) A person who does sanitary plumbing or sanitary drainage work must
tell the construction occupations registrar when the work is ready for
inspection.
Maximum penalty: 10 penalty units.
(2) A person who does sanitary plumbing or sanitary drainage work must
leave the work uncovered and convenient for inspection until
whichever of the following happens first:
(a) the work is inspected and approved by an inspector;
(b) an inspector advises the person that an inspection is not required;
(c) if the work is sanitary plumbing work—the end of 2 working
days after the construction occupations registrar was told that
the work was ready for inspection.
Maximum penalty: 5 penalty units.
(3) However, subsection (2) does not apply to the covering of
uninspected sanitary drainage work if—
(a) the licensee responsible for the sanitary drainage work is
satisfied on reasonable grounds that part of the work is being, or
is about to be, significantly damaged by flooding caused by a
storm; and
(b) the part of the work is temporarily covered by the minimum
amount of soil necessary to avoid the damage; and
(c) if, during an inspection, the inspector requires any part of the
temporary covering to be removed to assist inspection—the
licensee—
(i) removes the covering to the inspector’s satisfaction; or
(ii) arranges for another inspection to take place after the
covering is removed.
Sanitary plumbing and sanitary drainage Part 2
Section 9
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 7
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(4) A person who does sanitary plumbing or sanitary drainage work must,
while the work is being done, keep on the premises a copy of the plan
approval showing any minor variations to the approved plan.
Maximum penalty: 10 penalty units.
9 Testing of sanitary plumbing and drains
(1) Sanitary plumbing and drains must be tested in accordance with
AS/NZS 3500—
(a) before it is passed by an inspector; and
(b) if a drain is altered or repaired—before the alterations or repairs
are passed by an inspector.
(2) If a person does sanitary plumbing or sanitary drainage work that is
to be tested, the person must supply apparatus, tools, and labour for
the test, whether or not any part of the test is to be done by an
inspector.
Maximum penalty: 5 penalty units.
(3) A person who did sanitary plumbing or sanitary drainage work that is
being tested must rectify any of the work that the test finds defective.
Maximum penalty: 10 penalty units.
(4) Sanitary plumbing or sanitary drainage work is to be taken not to be
in accordance with the plumbing code if the person who did the work
does not supply apparatus, tools, and labour sufficient to allow the
work to be tested under this section.
10 Notification after completion of work
(1) This section applies if—
(a) sanitary plumbing or sanitary drainage work has been inspected
and approved; or
Part 2 Sanitary plumbing and sanitary drainage
Section 12
page 8 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) an inspector has advised the person who did the work that an
inspection is not required.
(2) A person who does sanitary plumbing or sanitary drainage work must,
if satisfied that the work has been completed in accordance with this
regulation and the plumbing code, within 7 days after completion of
the work, give the construction occupations registrar—
(a) a statement of the work completed; and
(b) evidence of payment of inspection fees under this regulation;
and
(c) a copy of—
(i) if the work relates to a single residential building—
a drainage plan on which there is endorsed a certificate that
the plan is a true record of the work carried out; or
(ii) in any other case—an approved drainage plan on which
there is endorsed a certificate that the plan is a true record
of the work carried out.
Note A certificate of compliance for plumbing or sanitary drainage work
cannot be issued under s 25 unless the construction occupations registrar
is satisfied that the work complies with this regulation. The registrar may
only be able to be so satisfied if the statement, evidence and plan about
the work has been given.
12 Separate drainage systems
(1) The drainage of each dwelling or building must be separate from
another dwelling or building.
(2) Despite subsection (1), the construction occupations registrar may
approve a combined drainage system, if satisfied that special reasons
exist for doing so.
Sanitary plumbing and sanitary drainage Part 2
Section 13
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 9
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
13 Disconnecting combined drainage systems
(1) This section applies if—
(a) the drainage system of a dwelling or building (the first dwelling
or building) is combined with the drainage system of a dwelling
or building on another parcel of land; and
(b) the combined drainage system is in the other parcel of land; and
(c) the combined drainage system was installed before
1 March 1999; and
(d) significant work has to be done on the drainage system of the
first dwelling or building.
(2) A person doing significant work must—
(a) disconnect the existing drainage pipes from the combined
drainage system; and
(b) if no separate drainage system is in place for the dwelling or
building—install a separate system; and
(c) connect the first dwelling or building to that drainage system.
(3) In this section:
significant work means work where—
(a) drains to more than 1/2 the fixtures are altered; or
(b) the number of fixtures is increased by more than 1/2.
14 Cover to interceptor traps and accessholes
An interceptor trap and accesshole must—
(a) be carried to ground level; and
(b) be fitted at that level with approved cast-iron airtight covers.
Part 2 Sanitary plumbing and sanitary drainage
Section 15
page 10 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
15 Rain and surface waters not to be discharged into sewers
etc
(1) A person must not discharge, or allow to be discharged, any
rainwater, surface water or stormwater into—
(a) a sewerage network; or
(b) a drain communicating with a sewerage network; or
(c) a sanitary fixture or drainage apparatus used in connection with
a drain mentioned in paragraph (b).
Maximum penalty: 10 penalty units.
(2) An inlet to a drain must be built and maintained in a way and at a
level that prevents the flow of rainwater, surface water or stormwater
into the drain.
(3) A person may apply in writing to the responsible utility for an
exemption from subsection (1).
(4) The responsible utility may exempt a person from compliance with
subsection (1) only if satisfied that the pollution and the volume of
water that would enter the network, drain, fixture or apparatus would
not detrimentally affect the sewerage system.
(5) Subsection (1) does not apply to a person who is exempt under this
section.
(6) For this section, if rainwater, surface water or stormwater is part of a
water service or hot-water system, the water is taken to not be
rainwater, surface water or stormwater.
16 Requirements for toilets—Act, s 17 (1) (b)
(1) The following requirements are prescribed:
(a) if a closet pan and cistern are to be installed—the pan must be a
reduced-flush closet pan and the cistern a dual-flush reduced
volume cistern;
Sanitary plumbing and sanitary drainage Part 2
Section 16
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 11
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) if a closet pan only is to be installed—the pan must be a
reduced-flush closet pan;
(c) if a cistern is to be installed that is connected to an existing
full-flush closet pan—the cistern must be a separate dual-flush
cistern that—
(i) is of at least 11L capacity; and
(ii) gives an effective full-flush not larger than 10L, and for
test purposes, 9L; and
(iii) gives an effective half-flush not larger than 5.5L, and for
test purposes, 4.5L;
(d) if a cistern is to be installed that is connected to an existing
reduced-flush closet pan—the cistern must be a dual-flush
reduced volume cistern;
(e) if a closet pan is to be flushed with water drawn from a central
storage cistern installed before 1 January 1994 and—
(i) the pan is a full-flush closet pan—the pan must be flushed
with an effective full-flush not exceeding 10L and for test
purposes, 9L; or
(ii) the pan is a reduced-flush closet pan—the pan must be
flushed with an effective full-flush not exceeding 10L and
for test purposes, either 6L or 9L;
(f) the pan may be flushed with a half-flush of at least 4.5L and not
exceeding 5.5L if a full-flush closet pan is to be flushed—
(i) with water drawn from a central storage cistern; and
(ii) by control fittings that allow the user to decide whether to
give a full-flush or half-flush;
(g) the pan may be flushed with a half-flush of at least 3L and not
exceeding 4L if a reduced-flush closet pan is to be flushed—
(i) with water drawn from a central storage cistern; and
Part 2 Sanitary plumbing and sanitary drainage
Section 16A
page 12 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(ii) by control fittings that allow the user to decide whether to
give a full-flush or half-flush;
(h) if a central storage cistern installation is to be installed—
(i) reduced-flush closet pans must be installed; and
(ii) control fittings must be installed that automatically control
the amount of water used in a way that each flush uses—
(A) on a full-flush—at least 6L and not exceeding 7L; or
(B) on a half-flush—at least 3L and not exceeding 4L.
(2) In this section:
dual-flush reduced volume cistern means a cistern that has the
capacity to—
(a) give an effective full-flush not exceeding 7L and for test
purposes 6L; and
(b) give an effective half-flush not exceeding 4L and for test
purposes 3L.
full-flush closet pan means a closet pan that is a full-flush pan under
AS 1172, as in force from time to time.
reduced-flush closet pan means a closet pan that is a reduced-flush
pan under AS 1172, as in force from time to time.
16A Building in separated sanitary drainage for grey water
(1) This section applies to sanitary drainage work or sanitary plumbing
work—
(a) done in relation to the erection, or extension of the floor area, of
a single residential building (other than a building or part of a
building that is a garage) (the building); and
Sanitary plumbing and sanitary drainage Part 2
Section 16A
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 13
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) for a sanitary drain or sanitary plumbing (applicable sanitary
drainage or plumbing) from a separated grey water waste
fixture that is located on—
(i) a ground floor of the building; or
(ii) a floor of the building that does not have a lower floor
directly below the waste fixture; and
(c) that is not, or is not to be, supplied with pumped sewage.
(2) A licensee commits an offence if—
(a) the licensee installs applicable sanitary drainage or plumbing to
which this section applies; and
(b) the applicable sanitary drainage or plumbing does not drain to a
grey water point.
Maximum penalty: 10 penalty units.
(3) A licensee commits an offence if—
(a) the licensee installs applicable sanitary drainage or plumbing to
which this section applies that drains to a grey water point; and
(b) a sanitary drain or sanitary plumbing (additional sanitary
drainage or plumbing) is connected to the applicable sanitary
drainage or plumbing between the separated grey water waste
fixture and the grey water point; and
(c) the additional sanitary drainage or plumbing is connected to a
sanitary fixture that is not a separated grey water waste fixture.
Maximum penalty: 10 penalty units.
(4) An offence against this section is a strict liability offence.
Part 2 Sanitary plumbing and sanitary drainage
Section 16B
page 14 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
16B Preservation of separated sanitary drainage for grey
water
(1) This section applies to a sanitary drain or sanitary plumbing in a
single residential building if the only sanitary fixtures connected to
the drain or plumbing are separated grey water waste fixtures.
(2) A licensee commits an offence if—
(a) the licensee connects a sanitary drain or sanitary plumbing
(additional sanitary drainage or plumbing) to a sanitary drain
or sanitary plumbing to which this section applies between a
separated grey water waste fixture and a grey water point; and
(b) the additional sanitary drainage or plumbing is connected to a
sanitary fixture that is not a separated grey water waste fixture.
Maximum penalty: 10 penalty units.
(3) An offence against this section is a strict liability offence.
Example
In a single residential building, there is a sanitary drain connected only to the bath,
the hand basin in the bathroom, a shower and the laundry tub (all separated grey
water waste fixtures). Jodie, a licensee, connects the kitchen sink (not a separated
grey water waste fixture) to the drain at a point between the laundry tub and a grey
water point. The connection of the kitchen sink to the drain is an offence against
this section.
16C Overflow from grey water disposal system
(1) This section applies to sanitary drainage work or sanitary plumbing
work—
(a) to install a grey water disposal system; or
(b) to change a grey water disposal system—
(i) to change the location of a discharge point; or
(ii) to increase the number of sanitary fixtures served by the
system; or
Sanitary plumbing and sanitary drainage Part 2
Section 16D
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 15
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(iii) to reduce the amount of grey water that the system can
store or dispose of; or
(iv) to change the method of storage or disposal of grey water.
(2) However, this section applies in relation to a grey water disposal
system for premises only if the premises are, or are to be, connected
to a sewerage network.
(3) A licensee commits an offence if—
(a) the licensee does sanitary drainage work or sanitary plumbing
work to which this section applies in relation to a grey water
disposal system; and
(b) the system as installed or changed does not provide for grey
water to drain automatically to a sewerage network if—
(i) the system is obstructed; or
(ii) the system receives more grey water than the system can
properly dispose of; or
(iii) the system overflows.
Maximum penalty: 10 penalty units.
(4) An offence against this section is a strict liability offence.
16D Retrofitting backflow prevention devices
(1) This section applies to sanitary drainage work or sanitary plumbing
work (applicable work)—
(a) to install a grey water disposal system; or
(b) to change a grey water disposal system—
(i) to change the location of a discharge point; or
(ii) to increase the number of sanitary fixtures served by the
system; or
Part 2 Sanitary plumbing and sanitary drainage
Section 16D
page 16 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(iii) to change the method of storage or disposal of grey water.
(2) A licensee commits an offence if—
(a) the licensee does applicable work at particular premises; and
(b) the licensee does not ensure that a backflow prevention device
that complies with AS/NZS 2845, as in force from time to time,
is, or has been, installed in compliance with the plumbing code
as part of the water supply plumbing for the premises.
Maximum penalty: 10 penalty units.
(3) For subsection (2), AS/NZS 3500 applies as if the work on the grey
water disposal system were completed and the system were being
used to its maximum intended capacity.
(4) An offence against this section is a strict liability offence.
Water supply Part 3
Section 16E
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 17
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 3 Water supply
16E Water efficiency requirements—water supply and
sanitary plumbing work—Act, s 17A (1) (b)
(1) The following requirements are prescribed:
(a) for domestic water supply plumbing work involving the
installation of, or work on, a shower—the shower head must
have a maximum flow capacity of not more than 9L per minute;
(b) for domestic water supply plumbing work involving the
installation of, or work on, a tap for a kitchen or laundry sink or
any other basin inside a building—the outlet of the tap must have
a maximum flow capacity of not more than 9L per minute.
(2) The maximum flow capacity mentioned in subsection (1) must be
worked out using AS/NZS 6400 as in force from time to time.
Note AS/NZS 6400 does not need to be notified under the Legislation Act
because s 47 (5) and (6) do not apply (see Act, s 44D). The standard may
be purchased at www.standards.org.au.
(3) Subsection (1) (b) does not apply to domestic water supply plumbing
work involving the installation of, or work on, a tap for a kitchen or
laundry sink or any other basin inside a building if—
(a) the tap is in part of the building used, or for use, mainly for
business; or
(b) the usual pressure of water that is, or is to be, supplied to the
building is less than 50kPa.
Example
a home on a farm supplied with bore water at a pressure less than 50kPa
(4) In this section:
domestic—water supply plumbing work or sanitary plumbing work
is domestic if it is work in relation to premises used, or for use, for
residential purposes.
Part 3 Water supply
Section 17
page 18 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
17 Notice about work on water service
A notice under the Act, section 15 (Notice of water supply plumbing
work by licensee) about intending to do work on a pipe connected to
a property service of not less than 50mm diameter must be
accompanied by a scale plan—
(a) stating the address of the premises where the work is to be done;
and
(b) showing the position on the premises where it is intended to lay
the pipes and fix meters, plugs, stop taps, and other fittings to
the pipes.
18 Water supply—work to conform to plumbing code
(1) A person must not do work on a water service or hot-water system
taking its water from a water network unless the work is done—
(a) in accordance with the plumbing code; and
(b) if the work was done on a pipe connected to a property service
of not less than 50mm diameter—in accordance with the plan
approved by the certifier under the Act, section 8 (Issue of plan
approvals).
Maximum penalty: 10 penalty units.
(2) Subsection (1) does not apply if—
(a) the requirements of the plumbing code are inconsistent with
standards mentioned in this regulation; and
(b) the work was done in accordance with this regulation.
Water supply Part 3
Section 19
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 19
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
19 Inspection of work etc
(1) A person who does work on a water service or hot-water system must
tell the construction occupations registrar when the work is ready for
inspection.
Maximum penalty: 10 penalty units.
(2) A person who does work on a water service or hot-water system must
leave the work uncovered and convenient for inspection until
whichever of the following happens first:
(a) the work is inspected and approved by an inspector;
(b) an inspector advises the person that an inspection is not required;
(c) the end of 2 working days after the construction occupations
registrar was told that the work was ready for inspection.
Maximum penalty: 5 penalty units.
20 Testing of water plumbing
(1) Water plumbing must be tested in accordance with AS/NZS 3500—
(a) before it is passed by an inspector; and
(b) if plumbing is altered or repaired—before the alterations or
repairs are passed by an inspector.
(2) A person who does plumbing work that is to be tested, must supply
the apparatus, tools and labour for the test, whether or not any part of
the test is to be done by an inspector.
Maximum penalty: 5 penalty units.
(3) A person who did plumbing work that is being tested must rectify any
of the work that the test finds defective.
Maximum penalty: 10 penalty units.
Part 3 Water supply
Section 21
page 20 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(4) Plumbing work is to be taken not to be in accordance with the
plumbing code if the person who did the work does not supply
apparatus, tools and labour sufficient to allow the work to be tested
under this section.
21 Notification after completion of work—water services
A person who does work on a water service or hot-water system must,
if satisfied that the work has been completed in accordance with this
regulation and the plumbing code, within 7 days after completion of
the work, give the construction occupations registrar —
(a) a statement of the work completed; and
(b) evidence of payment of inspection fees under this regulation;
and
(c) if the work is done on a pipe connected to a property service of
not less than 50mm diameter—a copy of a water plumbing plan
on which there is endorsed a certificate that the plan is a true
record of the work carried out.
Note A certificate of compliance for water plumbing work cannot be issued
under s 25 unless the construction occupations registrar is satisfied that
the work complies with this regulation. The registrar may only be able to
be so satisfied if the statement, evidence and plan about the work has been
given.
22 Backflow prevention device
(1) This section applies if a certifier has reasonable grounds for believing
that, by doing work of the kind mentioned in section 19 (Inspection
of work etc), non-potable liquids, solids or gases may get into the
potable water supply of the Territory.
Water supply Part 3
Section 22
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 21
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(2) A certifier must not, without reasonable excuse, approve a plan for
the work unless—
(a) the plan includes the installation of an appropriate backflow
prevention device for protecting the potable water supply from
non-potable liquids, solids or gases; or
(b) the certifier has certified on the plan that, in the certifier’s
opinion, the installation is not required.
Maximum penalty: 5 penalty units.
(3) A person must not install a backflow prevention device except in
accordance with the plumbing code.
Maximum penalty: 10 penalty units.
(4) A person who installs a testable backflow prevention device must—
(a) tell the construction occupations registrar that the device has
been installed; and
(b) ensure that the device is tested by a suitably qualified person in
accordance with AS/NZS 2845.3, as soon as practicable after
installation; and
(c) within 7 days after the device is tested, give the registrar a test
report prepared by the person who did the test.
Maximum penalty: 10 penalty units.
(5) The owner of a parcel of land on which a testable backflow prevention
device is installed must—
(a) cause the device to be tested by a suitably qualified person in
accordance with AS/NZS 2845.3; and
Part 3 Water supply
Section 23
page 22 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) within 7 days after the device is tested, give the construction
occupations registrar a test report prepared by the person who
did the test.
Maximum penalty: 10 penalty units.
(6) For subsection (5)—
(a) if maintenance or repair work has been done on a testable
backflow prevention device—it must be tested within 7 days
after the work was done; or
(b) in any other case—it must be tested within 12 months after the
last test was done on the device under this section.
(7) In this section:
appropriate backflow prevention device means a backflow
prevention device that complies with AS/NZS 2845, as in force from
time to time.
suitably qualified person means a person who holds a current
plumbers licence that is endorsed under the Construction
Occupations (Licensing) Regulation 2004, section 31 (Endorsing
plumbers licences for backflow prevention device test work—Act,
s 22).
23 Water pumping appliance not to be connected without
permission
(1) A person must not connect a water pumping appliance to a pipe that
is connected indirectly to the water network without the permission
of the responsible utility.
Maximum penalty: 10 penalty units.
(2) In this section:
cooling appliance means an apparatus or appliance that uses water in
the process of cooling premises.
Water supply Part 3
Section 24
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 23
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
water pumping appliance includes an automatic syphon, a hand
syphon, cooling appliance, water circulation apparatus and water
power pumping appliance.
24 Connecting pipe with steam-boilers
(1) A person must not connect a service pipe directly to a steam-boiler
for feeding the boiler with water.
Maximum penalty: 10 penalty units.
(2) A person who makes a connection for feeding a steam-boiler with
water must make the connection to the boiler from a break tank.
Maximum penalty: 10 penalty units.
24A Building in separated rainwater supply service
(1) This section applies to water supply plumbing work—
(a) for a single residential building or a garage associated with a
single residential building; and
(b) in relation to a water service directly connected to a cistern tap
point or a washing machine tap point.
(2) However, this section does not apply to water supply plumbing work
for—
(a) a hot-water system; or
(b) a ceramic cistern manufactured with provision for only 1 water
inlet pipe; or
(c) a building that has, or will have, rainwater as its only source of
water.
(3) A licensee commits an offence if—
(a) the licensee connects a water service to a cistern tap point (the
first cistern tap point) in the course of the water supply
plumbing work; and
Part 3 Water supply
Section 24A
page 24 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) the licensee does not also install water supply plumbing that can
connect a rainwater supply to an additional cistern tap point (the
additional cistern tap point) in compliance with subsection (5).
Maximum penalty: 10 penalty units.
(4) A licensee commits an offence if—
(a) the licensee connects a water service to a washing machine tap
point (the first washing machine tap point) in the course of the
water supply plumbing work; and
(b) the licensee does not also install water supply plumbing that can
connect a rainwater supply to an additional washing machine tap
point (the additional washing machine tap point) in compliance
with subsection (5).
Maximum penalty: 10 penalty units.
(5) The additional cistern tap point or additional washing machine tap
point must—
(a) be adjacent to the first cistern tap point or first washing machine
tap point; and
(b) if the additional tap point is not fitted with a tap—
(i) be connected to a threaded pipe fitting that has the same
dimensions and thread characteristics as the first cistern tap
point or first washing machine tap point; and
(ii) be provided with a cover ring or flange that matches as
closely as possible the dimensions, shape, finish and colour
of the cover ring or flange (if any) on the first cistern tap
point or first washing machine tap point; and
(c) if the additional tap point is fitted with a tap—be fitted with a
tap that matches as closely as possible the model, size, thread
characteristics, type and appearance of the tap (if any) fitted to
the first cistern tap point or first washing machine tap point.
Water supply Part 3
Section 24B
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(6) An offence against this section is a strict liability offence.
24B Installing rainwater supply service
(1) Section 18, section 19 and section 21 apply to work done on a
rainwater supply service as if—
(a) a reference in this regulation to a water service were a reference
to a rainwater supply service; and
(b) the rainwater supply service took its water from a water
network.
(2) A licensee commits an offence if—
(a) the licensee installs a rainwater supply service; and
(b) the service is not connected to a rainwater supply; and
(c) each outlet and inlet, including any associated tap outlet, is not
sealed and capped with a screw-on cap mated to—
(i) a threaded pipe fitting connected to the pipe; or
(ii) a washing machine tap outlet thread.
Maximum penalty: 10 penalty units.
(3) An offence against this section is a strict liability offence.
(4) In this section:
rainwater supply service means water supply plumbing that can
connect a rainwater supply to—
(a) a cistern tap point; or
(b) a washing machine tap point.
Part 4 Certificates of compliance
Section 25
page 26 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 4 Certificates of compliance
25 Certificate of compliance
(1) The owner of premises may apply, in writing, to the construction
occupations registrar for a certificate of compliance for plumbing or
sanitary drainage work.
(2) The construction occupations registrar must issue a certificate of
compliance if satisfied that the plumbing or sanitary drainage work
complies with this regulation.
(3) A person must not use plumbing or sanitary drainage work unless a
certificate of compliance has been issued for the work.
Maximum penalty (subsection (3)): 10 penalty units.
Notification and review of decisions Part 5
Section 26
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 27
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 5 Notification and review of
decisions
26 Reviewable decisions—Act, s 44, def reviewable decision
A decision mentioned in schedule 1, column 3 under a provision
mentioned in column 2 in relation to the decision is prescribed.
27 Right of review and notice—Act, s 44A and s 44B (a)
An entity mentioned in schedule 1, column 4 is prescribed.
Part 6 Plumbing code
Section 28
page 28 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Part 6 Plumbing code
28 Documents forming part of plumbing code—Act,
s 44C (1), def plumbing code, par (b)
A volume of the National Construction Code series is prescribed if
the volume—
(a) is published by the Australian Building Codes Board from time
to time; and
(b) includes a notation that it forms part of the Plumbing Code of
Australia.
Note The National Construction Code does not need to be notified under the
Legislation Act because s 47 (5) and (6) does not apply (see Act, s 44D
and Legislation Act, s 47 (7)). The National Construction Code is
accessible at www.ncc.abcb.gov.au.
Reviewable decisions Schedule 1
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 29
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Schedule 1 Reviewable decisions
(see s 26 and s 27)
column 1
item
column 2
section
column 3
decision
column 4
entity
1 Act, 22 (2) give direction to do
work
owner given direction
2 Act, 32 (4) give direction to take
stated action
entity given direction
3 15 (4) refuse to give
exemption
applicant for exemption
4 25 refuse to issue
certificate of
compliance
applicant for certificate
of compliance
Dictionary
page 30 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Dictionary
(see s 3)
Note 1 The Legislation Act contains definitions relevant to this regulation.
For example:
• AS (see s 164)
• AS/NZS (see s 164)
• the Territory.
Note 2 Terms used in this regulation have the same meaning that they have in
the Water and Sewerage Act 2000 (see Legislation Act, s 148). For
example, the following terms are defined in the Water and Sewerage
Act 2000, dict:
• backflow prevention device
• grey water
• hot-water system
• land sublease
• licensee
• owner
• sanitary drainage work
• sanitary plumbing work
• sewerage network
• single residential building
• water service
• water supply plumbing work.
AS 1172 means AS 1172 (Water closets (WC)—Pans), as in force
from time to time.
Note AS 1172 may be purchased at www.standards.org.au.
AS/NZS 2845 means AS/NZS 2845.1: 2010 (Water supply—
Backflow prevention devices—Materials, design and performance
requirements), as in force from time to time.
Note AS/NZS 2845 may be purchased at www.standards.org.au.
Dictionary
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 31
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
AS/NZS 2845.3 means AS/NZS 2845.3 (Water supply—Backflow
prevention devices—Field testing and maintenance of testable
devices), as in force from time to time.
Note AS 2845.3 may be purchased at www.standards.org.au.
AS/NZS 3500 means AS/NZS 3500 (Plumbing and drainage set), as
in force from time to time.
Note AS/NZS 3500 may be purchased at www.standards.org.au.
cistern tap point means a point on water supply plumbing where a
tap for a cistern is, or can be, connected.
grey water disposal system means any of the following systems, if
the system is not connected to a sewerage network apart from any
drainage mentioned in section 16C (3) (b):
(a) a reservoir or tank that is, or can be, used to store grey water;
(b) a pipe or conduit that is, or can be, used to discharge grey water
into the environment.
Note For the meaning of sewerage network, see the Utilities Act 2000, s 14
(see Water and Sewerage Act 2000, dict).
grey water point means a point on a sanitary drain or sanitary
plumbing—
(a) that is located outside and clear of any building or structure; and
(b) from which grey water may flow by gravity to a grey water
holding vessel, whether directly or through pipework draining;
and
(c) from which a grey water holding vessel or pipework draining
mentioned in paragraph (b) can be connected without changing
the location of the sanitary drain or sanitary plumbing.
parcel, of land, includes land under a land sublease.
rainwater point means a point on rainwater supply service—
(a) that is located on the exterior of the building it serves; and
Dictionary
page 32 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
(b) from which rainwater may flow, using a pump if required, from
a rainwater tank to a washing machine tap point or a cistern,
whether directly or through pipework draining; and
(c) from which the washing machine tap point or cistern mentioned
in paragraph (b) can be connected without demolishing, cutting
or removing anything other than a pipe, cap or hatch to gain
access to the rainwater point, or relocating the rainwater point.
separated grey water waste fixture means—
(a) a bath, including a spa bath; or
(b) a hand basin other than a kitchen sink; or
(c) a laundry tub; or
(d) a shower; or
(e) a floor waste for a room that contains no sanitary fixtures other
than those mentioned in paragraphs (a), (b), (c) and (d).
washing machine tap point means a point on water supply plumbing
where a cold water tap for a clothes washing machine is, or can be,
connected.
Endnotes
About the endnotes 1
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 33
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Endnotes
1 About the endnotes
Amending and modifying laws are annotated in the legislation history and the
amendment history. Current modifications are not included in the republished law
but are set out in the endnotes.
Not all editorial amendments made under the Legislation Act 2001, part 11.3 are
annotated in the amendment history. Full details of any amendments can be
obtained from the Parliamentary Counsel’s Office.
Uncommenced amending laws are not included in the republished law. The details
of these laws are underlined in the legislation history. Uncommenced expiries are
underlined in the legislation history and amendment history.
If all the provisions of the law have been renumbered, a table of renumbered
provisions gives details of previous and current numbering.
The endnotes also include a table of earlier republications.
2 Abbreviation key
A = Act NI = Notifiable instrument
AF = Approved form o = order
am = amended om = omitted/repealed
amdt = amendment ord = ordinance
AR = Assembly resolution orig = original
ch = chapter par = paragraph/subparagraph
CN = Commencement notice pres = present
def = definition prev = previous
DI = Disallowable instrument (prev...) = previously
dict = dictionary pt = part
disallowed = disallowed by the Legislative r = rule/subrule
Assembly reloc = relocated
div = division renum = renumbered
exp = expires/expired R[X] = Republication No
Gaz = gazette RI = reissue
hdg = heading s = section/subsection
IA = Interpretation Act 1967 sch = schedule
ins = inserted/added sdiv = subdivision
LA = Legislation Act 2001 SL = Subordinate law
LR = legislation register sub = substituted
LRA = Legislation (Republication) Act 1996 underlining = whole or part not commenced
mod = modified/modification or to be expired
Endnotes
3 Legislation history
page 34 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
3 Legislation history
This regulation was originally the Water and Sewerage Regulations 2001. It was
renamed under the Legislation Act 2001.
Water and Sewerage Regulation 2001 SL2001-2
notified 25 January 2001 (Gaz 2001 No 4)
s 1, s 2 commenced 25 January 2001 (IA s 10B)
remainder commenced 25 January 2001 (s 2 and Gaz 2001 No 4) (but
see IA s 10C (2))
as amended by
Legislation (Consequential Amendments) Act 2001 A2001-44 pt 414
notified 26 July 2001 (Gaz 2001 No 30)
s 1, s 2 commenced 26 July 2001 (IA s 10B)
pt 414 commenced 12 September 2001 (s 2 and see Gaz 2001
No S65)
Statute Law Amendment Act 2002 A2002-30 pt 3.92
notified LR 16 September 2002
s 1, s 2 taken to have commenced 19 May 1997 (LA s 75 (2))
pt 3.92 commenced 17 September 2002 (s 2 (1))
Construction Occupations Legislation Amendment Act 2004
A2004-13 sch 1 pt 1.4, sch 2 pt 2.28
notified LR 26 March 2004
s 1, s 2 commenced 26 March 2004 (LA s 75 (1))
sch 1 pt 1.4, sch 2 pt 2.28 commenced 1 September 2004 (s 2 and see
Construction Occupations (Licensing) Act 2004 A2004-12, s 2 and
CN2004-8)
Water and Sewerage Amendment Regulations 2004 (No 1) SL2004-45
notified LR 8 September 2004
s 1, s 2 commenced 8 September 2004 (LA s 75 (1))
remainder commenced 1 January 2005 (s 2)
Water and Sewerage Amendment Act 2004 A2004-67 pt 3
notified LR 9 September 2004
s 1, s 2 commenced 9 September 2004 (LA s 75 (1))
pt 3 commenced 10 September 2004 (s 2)
Endnotes
Legislation history 3
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 35
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Construction Occupations Legislation Amendment Act 2005
A2005-34 sch 1 pt 1.6
notified LR 6 July 2005
s 1, s 2 commenced 6 July 2005 (LA s 75 (1))
sch 1 pt 1.6 commenced 27 July 2005 (s 2)
Water and Sewerage Amendment Regulation 2005 (No 1) SL2005-16
notified LR 29 July 2005
s 1, s 2 commenced 29 July 2005 (LA s 75 (1))
remainder commenced 30 July 2005 (s 2)
Water and Sewerage Amendment Regulation 2005 (No 2) SL2005-25
notified LR 27 September 2005
s 1, s 2 commenced 27 September 2005 (LA s 75 (1))
remainder commenced 28 September 2005 (s 2)
ACT Civil and Administrative Tribunal Legislation Amendment
Act 2008 (No 2) A2008-37 sch 1 pt 1.107
notified LR 4 September 2008
s 1, s 2 commenced 4 September 2008 (LA s 75 (1))
sch 1 pt 1.107 commenced 2 February 2009 (s 2 (1) and see ACT Civil
and Administrative Tribunal Act 2008 A2008-35, s 2 (1) and CN2009-2)
Water and Sewerage (Energy Efficient Hot-Water Systems)
Legislation Amendment Act 2009 A2009-26 pt 3
notified LR 8 September 2009
s 1, s 2 commenced 8 September 2009 (LA s 75 (1))
pt 3 commenced 31 January 2010 (s 2)
Building Legislation Amendment Regulation 2010 (No 1) SL2010-15
pt 3
notified LR 3 May 2010
s 1, s 2 commenced 3 May 2010 (LA s 75 (1))
pt 3 commenced 4 May 2010 (s 2)
Building Legislation Amendment Regulation 2010 (No 2) SL2010-21
pt 3
notified LR 31 May 2010
s 1, s 2 commenced 31 May 2010 (LA s 75 (1))
pt 3 commenced 1 June 2010 (s 2)
Endnotes
3 Legislation history
page 36 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Administrative (One ACT Public Service Miscellaneous Amendments)
Act 2011 A2011-22 sch 1 pt 1.173
notified LR 30 June 2011
s 1, s 2 commenced 30 June 2011 (LA s 75 (1))
sch 1 pt 1.173 commenced 1 July 2011 (s 2 (1))
Statute Law Amendment Act 2013 A2013-19 sch 3 pt 3.52
notified LR 24 May 2013
s 1, s 2 commenced 24 May 2013 (LA s 75 (1))
sch 3 pt 3.52 commenced 14 June 2013 (s 2)
Construction and Energy Efficiency Legislation Amendment Act 2013
A2013-31 pt 11
notified LR 26 August 2013
s 1, s 2 commenced 26 August 2013 (LA s 75 (1))
ss 97-99 commenced 27 August 2013 (s 2 (3))
pt 11 remainder commenced 1 September 2013 (s 2 (1))
Planning and Development (University of Canberra and Other
Leases) Legislation Amendment Act 2015 A2015-19 pt 24
notified LR 11 June 2015
s 1, s 2 commenced 11 June 2015 (LA s 75 (1))
pt 24 commenced 1 July 2015 (s 2 and CN2015-9)
Building and Construction Legislation Amendment Regulation 2023
(No 1) SL2023-7 pt 4
notified LR 28 April 2023
s 1, s 2 commenced 28 April 2023 (LA s 75 (1))
pt 4 commenced 1 May 2023 (s 2 (1))
Building and Construction Legislation Amendment Act 2025
A2025-5 pt 9
notified LR 31 March 2025
s 1, s 2 commenced 31 March 2025 (LA s 75 (1))
pt 9 commenced 1 April 2025 (s 2)
Statute Law Amendment Act 2025 A2025-29 sch 3 pt 3.104
notified LR 6 November 2025
s 1, s 2 commenced 6 November 2025 (LA s 75 (1))
sch 3 pt 3.104 commenced 26 November 2025 (s 2 (3))
Endnotes
Amendment history 4
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 37
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
4 Amendment history
Name of regulation
s 1 am R6 LA
Commencement
s 2 om A2001-44 amdt 1.4284
Notes
s 4 am A2001-44 amdt 1.4285
Offences against regulation—application of Criminal Code etc
s 5A ins SL2004-45 s 4
Sanitary plumbing and sanitary drainage—work to conform to plumbing
code
s 6 hdg sub A2013-31 s 91
s 6 am A2004-13 amdt 2.122; A2013-19 amdt 3.489; A2013-31
ss 92-94
Notice of plan approval—Act, s 8 (5)
s 7A ins A2004-13 amdt 2.123
No reconsideration for plan amendment—Act, s 9 (3)
s 7B ins A2004-13 amdt 1.9
Notice to be given about work done
s 8 am A2004-13 amdt 1.10, amdt 2.131; ss renum R4 LA (see
A2004-13 amdt 1.11)
Testing of sanitary plumbing and drains
s 9 am A2013-19 amdts 3.489-3.491; A2013-31 s 95
Notification after completion of work
s 10 am A2004-13 amdt 2.131, amdt 2.132; A2013-19 amdt 3.491;
A2013-31 s 96
Unblocking of drain by owner of land
s 11 om A2004-13 amdt 2.124
Separate drainage systems
s 12 am A2004-13 amdt 2.131
Rain and surface waters not to be discharged into sewers etc
s 15 am A2004-13 amdt 1.12
Requirements for toilets—Act, s 17 (1) (b)
s 16 sub A2004-13 amdt 2.125
am A2013-31 ss 97-99
Endnotes
4 Amendment history
page 38 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Building in separated sanitary drainage for grey water
s 16A s 16A ins A2004-67 s 6 renum as s 16E
ins SL2004-45 s 5
Preservation of separated sanitary drainage for grey water
s 16B ins SL2004-45 s 5
am R23 LA (see also A2025-29 amdt 3.364)
Overflow from grey water disposal system
s 16C ins SL2004-45 s 5
am R23 LA (see also A2025-29 amdt 3.365)
Retrofitting backflow prevention devices
s 16D ins SL2004-45 s 5
am A2013-19 amdt 3.492; A2013-31 s 100
Water efficiency requirements—water supply and sanitary plumbing work
—Act, s 17A (1) (b)
s 16E (prev s 16A) ins A2004-67 s 6
renum as s 16E R5 LA
(5)-(8) exp 1 July 2005 (s 16E (8))
ss renum R8 LA
am SL2005-16 s 4; SL2005-25 s 4
ss (6)-(9) exp 1 July 2006 (s 16E (9))
am A2025-5 s 40, s 41
Water supply—work to conform to plumbing code
s 18 hdg sub A2013-31 s 101
s 18 am A2004-13 amdt 2.126, amdt 2.127; A2013-19 amdt 3.493;
A2013-31 s 102, s 103
Inspection of work etc
s 19 am A2004-13 amdt 2.131
Testing of water plumbing
s 20 am A2013-19 amdts 3.493-3.495; A2013-31 s 104
Notification after completion of work—water services
s 21 am A2004-13 amdt 2.131, amdt 2.132; A2013-19 amdt 3.495;
A2013-31 s 105
Backflow prevention device
s 22 am A2004-13 amdt 2.128, amdt 2.129, amdt 2.131,
amdt 2.132; ss renum R4 LA (see A2004-13 amdt 2.130);
A2013-19 amdt 3.492; A2013-31 s 106, s 107
Building in separated rainwater supply service
s 24A ins SL2004-45 s 6
Endnotes
Amendment history 4
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 39
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Installing rainwater supply service
s 24B ins SL2004-45 s 6
Certificates of compliance
pt 4 hdg sub SL2023-7 s 16
Certificate of compliance
s 25 am A2004-13 amdt 2.131
Notification and review of decisions
pt 5 hdg ins SL2023-7 s 17
Reviewable decisions—Act, s 44, def reviewable decision
s 26 am A2004-13 amdt 2.131
sub A2008-37 amdt 1.560
Right of review and notice—Act, s 44A and s 44B (a)
s 27 am A2004-13 amdt 2.131
sub A2008-37 amdt 1.560
Plumbing code
pt 6 hdg ins SL2023-7 s 18
Documents forming part of plumbing code—Act, s 44C (1), def plumbing
code, par (b)
s 28 ins A2009-26 s 9
om A2013-31 s 108
ins SL2023-7 s 18
Reviewable decisions
sch 1 ins A2008-37 amdt 1.561
Hot-water system standard
sch 2 hdg ins A2009-26 s 10
om A2013-31 s 109
Definitions—sch 2
s 2.1 ins A2009-26 s 10
om A2013-31 s 109
def building ins A2009-26 s 10
om A2013-31 s 109
def class ins A2009-26 s 10
om A2013-31 s 109
Compliant hot-water systems
s 2.2 ins A2009-26 s 10
om SL2010-15 s 26
Endnotes
4 Amendment history
page 40 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
Water heater—installation
s 2.3 hdg sub SL2010-15 s 27
s 2.3 ins A2009-26 s 10
am SL2010-15 ss 28-31; SL2010-21 s 6; A2013-19
amdts 3.497-3.501
om A2013-31 s 109
Water heater—determination of other water heaters
s 2.4 ins A2009-26 s 10
sub SL2010-15 s 32
om A2013-31 s 109
Water heater—frost protection standard
s 2.5 ins A2009-26 s 10
sub SL2010-15 s 32
om A2013-31 s 109
Hot-water system—water flow performance standard
s 2.6 ins A2009-26 s 10
am SL2010-15 ss 33-35
om A2013-31 s 109
Dictionary
dict am A2002-30 amdt 3.992; SL2004-45 s 7; A2005-34
amdt 1.54; A2009-26 s 11, s 12; A2011-22 amdt 1.480;
A2013-19 amdt 3.502; A2013-31 s 110; A2015-19 s 150;
A2025-29 amdt 3.366, amdt 3.367
def AS 1172 ins A2013-19 amdt 3.503
def AS/NZS 2845 ins A2013-19 amdt 3.505
def AS/NZS 2845.3 ins A2013-19 amdt 3.504
def AS/NZS 3500 ins A2013-31 s 111
def Australian Standard 1172 om A2013-19 amdt 3.506
def Australian Standard 2845.3 om A2013-19 amdt 3.506
def Australian Standard 3500 ins SL2004-45 s 8
om A2005-34 amdt 1.55
def building ins A2009-26 s 13
om A2013-31 s 112
def cistern tap point ins SL2004-45 s 8
def class ins A2009-26 s 13
om A2013-31 s 112
def compliant gas hot-water system ins A2009-26 s 13
om SL2010-15 s 36
def compliant heat pump hot-water system ins A2009-26
s 13
om SL2010-15 s 36
def compliant solar hot-water system ins A2009-26 s 13
om SL2010-15 s 36
def grey water disposal system ins SL2004-45 s 8
Endnotes
Amendment history 4
R24
26/11/25
Water and Sewerage Regulation 2001
Effective: 26/11/25
page 41
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
def grey water point ins SL2004-45 s 8
def hot-water system standard ins A2009-26 s 13
om A2013-31 s 112
def parcel ins A2015-19 s 151
def rainwater point ins SL2004-45 s 8
def separated grey water waste fixture ins SL2004-45 s 8
def the Act om A2001-44 amdt 1.4286
def washing machine tap point ins SL2004-45 s 8
Endnotes
5 Earlier republications
page 42 Water and Sewerage Regulation 2001
Effective: 26/11/25
R24
26/11/25
Authorised by the ACT Parliamentary Counsel—also accessible at www.legislation.act.gov.au
5 Earlier republications
Some earlier republications were not numbered. The number in column 1 refers to
the publication order.
Since 12 September 2001 every authorised republication has been published in
electronic pdf format on the ACT legislation register. A selection of authorised
republications have also been published in printed format. These republications are
marked with an asterisk (*) in column 1. Electronic and printed versions of an
authorised republication are identical.
Republication No Amendments to Republication date
1 not amended 15 June 2001
2 A2001-44 12 September 2001
3 A2002-30 3 October 2002
4 A2004-13 1 September 2004
5 A2004-67 10 September 2004
6 A2004-67 2 November 2004
7 A2004-67 1 January 2005
8 A2004-67 2 July 2005
9 A2005-34 27 July 2005
10 SL2005-16 30 July 2005
11 SL2005-25 28 September 2005
12 SL2005-25 2 July 2006
13 A2008-37 2 February 2009
14 A2009-26 31 January 2010
15 SL2010-15 4 May 2010
16 SL2010-21 1 June 2010
17 A2011-22 1 July 2011
18 A2013-19 14 June 2013
19 A2013-31 27 August 2013
20 A2013-31 1 September 2013
21 A2015-19 1 July 2015