Commonwealth legislation

Vehicle Standard (Australian Design Rule 86/00 – Parking Lamps) 2016

In ForceCTH

Jurisdiction

Commonwealth

Collection

legislative instrument

Plain English Summary

3/10 complexity

This Standard sets the photometric (light output and visibility) rules for parking lamps intended to make stationary vehicles noticeable (s2). It applies only where other ADRs require, allow or forbid parking lamps (s3) and requires manufacturers to meet Appendix A’s technical requirements except for specified administrative and transitional parts that are exempted (s5–6). The instrument treats UN Regulation No.77’s technical requirements as equivalent (s7), so compliance may follow that UN text. Who pays: vehicle manufacturers; who decides: approval authorities under the ADR cross‑references (s5–6).

JSON API

Deep dive

Want the full deep dive?

Zoe can write the in-depth analysis on top of the summary above: how it works, who it affects and what each part actually does.

Current sections

Direct links to the current provisions in Vehicle Standard (Australian Design Rule 86/00 – Parking Lamps) 2016.

CONTENTS

LEGISLATIVE PROVISIONS.....................................3
FUNCTION....................................................3
APPLICABILITY...............................................3
DEFINITIONS..................................................3
REQUIREMENTS...............................................3
EXEMPTIONS AND ALTERNATIVE PROCEDURES.................3
ALTERNATIVE STANDARDS....................................4

APPENDIX A.........................................................5

NOTES .............................................................30

LEGISLATIVE PROVISIONS
1. Name of Standard
  1. This Standard is the Vehicle Standard (Australian Design Rule 86/00 – Parking Lamps) 2016.
  2. This Standard may also be cited as Australian Design Rule 86/00 – Parking Lamps.
FUNCTION
1. The function of this standard is to prescribe the photometric requirements for Parking Lamps, which are intended to be used to draw attention to the presence of a stationary vehicle.
APPLICABILITY
1. The circumstances under which Parking Lamps are mandatory, optional or prohibited are set out in ADR 13/…, ADR 19/…, or 67/… as applicable.
DEFINITIONS
1. For vehicle categories, definitions and meanings used in this standard, refer to:
  1. Definitions in Appendix A of this standard; and where there is no conflict
  2. Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.
REQUIREMENTS
1. Vehicles subject to the requirements of this standard must comply with the requirements of Appendix A, except as varied by Section 6 Exemptions and Alternative Procedures.
2. In place of Regulation No. 37 where referenced in Appendix A, read ADR 51/00.
3. In place of Regulation No. 48 where referenced in Appendix A, read ADR 13/00.
EXEMPTIONS AND ALTERNATIVE PROCEDURES
1. Compliance with the following parts, sections and annexes of Appendix A is not required for the purposes of this standard:

Section 1 Scope

Section 3 Application for approval

Section 4 Markings

Section 5 Approval

Section 11 Modification of a type of parking lamp and extension of approval

Section 13 Penalties for non-conformity of production

Section 14 Production definitely discontinued

Section 15 Names and addresses of Technical Services responsible for conducting approval tests, and of Type Approval Authorities

Section 16 Transitional provisions

Annex 1 Communication

Annex 2 Examples of arrangements of approval marks

ALTERNATIVE STANDARDS
1. The technical requirements of the United Nations Regulation No. 77 – UNIFORM PROVISIONS CONCERNING THE APPROVAL OF PARKING LAMPS FOR POWER-DRIVEN VEHICLES, in its original form, shall be deemed to be equivalent to the technical requirements of this standard.

Source text

Sourced from the Federal Register of Legislation (legislation.gov.au), CC BY 4.0.

CONTENTS CONTENTS

LEGISLATIVE PROVISIONS.....................................3
FUNCTION....................................................3
APPLICABILITY...............................................3
DEFINITIONS..................................................3
REQUIREMENTS...............................................3
EXEMPTIONS AND ALTERNATIVE PROCEDURES.................3
ALTERNATIVE STANDARDS....................................4

APPENDIX A.........................................................5

NOTES .............................................................30

LEGISLATIVE PROVISIONS
1. Name of Standard
  1. This Standard is the Vehicle Standard (Australian Design Rule 86/00 – Parking Lamps) 2016.
  2. This Standard may also be cited as Australian Design Rule 86/00 – Parking Lamps.
FUNCTION
1. The function of this standard is to prescribe the photometric requirements for Parking Lamps, which are intended to be used to draw attention to the presence of a stationary vehicle.
APPLICABILITY
1. The circumstances under which Parking Lamps are mandatory, optional or prohibited are set out in ADR 13/…, ADR 19/…, or 67/… as applicable.
DEFINITIONS
1. For vehicle categories, definitions and meanings used in this standard, refer to:
  1. Definitions in Appendix A of this standard; and where there is no conflict
  2. Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.
REQUIREMENTS
1. Vehicles subject to the requirements of this standard must comply with the requirements of Appendix A, except as varied by Section 6 Exemptions and Alternative Procedures.
2. In place of Regulation No. 37 where referenced in Appendix A, read ADR 51/00.
3. In place of Regulation No. 48 where referenced in Appendix A, read ADR 13/00.
EXEMPTIONS AND ALTERNATIVE PROCEDURES
1. Compliance with the following parts, sections and annexes of Appendix A is not required for the purposes of this standard: