Vehicle Standard (Australian Design Rule 81/01 – Fuel Consumption Labelling for Light Vehicles) 2005
5EXEMPTIONS AND ALTERNATIVE PROCEDURES
Start here
Get a plain-English read of 5
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 81/01 – Fuel Consumption Labelling for Light Vehicles) 2005.
5 EXEMPTIONS AND ALTERNATIVE PROCEDURES
5.1 The following provisions of Appendix B are not applicable:
Section 1 Scope
Section 3 Application for Approval
Section 4 Approval
Section 6 Modification and extension of approval of the approved type
Section 7 Conditions of extension of the type approval for vehicle type
Section 9 Conformity of Production
Section 10 Penalties for non-conformity of production
Section 11 Production definitely discontinued
Section 12 Names and addresses of technical services responsible for conducting approval tests and of administrative departments
Annex 1 Essential characteristics of the internal combustion engine and information concerning the conduct of tests
Annex 2 Essential characteristics of the electric power train and information concerning the conduct of tests
Annex 3 Communication
Annex 4 Arrangements of Approval Marks
5.2 Paragraph 5.2.1 of Appendix B is amended by replacing the words ‘in force at the time of approval of the vehicle’ with ‘as applied under ADR 79/00 or, if the vehicle is to be approved under ADR 79/01, as described in appendix 1 of annex 4 to Regulation No.83 as applied under ADR 79/01’
5.3 Paragraph 5.2.3 of Appendix B is amended by replacing the words ‘annex 4’ with ‘annex 5’.
5.4 Paragraph 5.2.4 of Appendix B is amended by:
5.4.1 Replacing the words ‘annex 10 of Regulation No. 83’ with ‘annex 9 to Regulation No. 83 as applied under ADR 79/00, or if the vehicle is to be approved under ADR 79/01, as defined in annex 10 to Regulation No. 83 as applied under ADR 79/01.’; and
5.4.2 Deleting the words ‘For LPG and natural gas (NG) that reference fuel must be used which is chosen by the manufacturer for the measurement of the net power in accordance with Regulations No. 85. The chosen fuel must be specified in the communication document as defined in annex 3 to this Regulation.’
5.5 Paragraph 1.1.5 of Annex 5 to Appendix B is amended by replacing the words ‘according to the procedure prescribed in paragraph 5.2.1 of annex 7 to Regulation No. 83 in force at the time of approval of the vehicle’ with ‘by placing the vehicle on the chassis dynamometer and driving it through one Part One and two Part Two driving cycles of the Type I test described in annex 4 to Regulation 83, as applied under ADR79/00, or if the vehicle is to be approved under ADR 79/01, as described in annex 4 to Regulation 83 as applied under ADR79/01.’
5.6 Paragraph 1.4.1 of Annex 5 to Appendix B is amended by replacing the words ‘in force at the time of approval of the vehicle’ with ‘as applied under ADR 79/00 or, if the vehicle is to be approved under ADR 79/01, as described in Appendix 1 of annex 4 to Regulation No. 83 as applied under ADR 79/01.’