Vehicle Standard (Australian Design Rule 59/00 – Standards For Omnibus Rollover Strength) 2007
APPENDIX AAPPENDIX A
Start here
Get a plain-English read of APPENDIX A
Turn the raw legal text into a practical explanation grounded in Vehicle Standard (Australian Design Rule 59/00 – Standards For Omnibus Rollover Strength) 2007.
APPENDIX A
AGREEMENT
CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS
FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED
AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS [*]/
(Revision 2, including the amendments which entered into force on 16 October 1995)
_________
Addendum 65 : Regulation No. 66
Revision 1
Incorporating all valid text up to:
Supplement 1 to the original version of the Regulation - Date of entry into force: 3 September 1997
01 series of amendments - Date of entry into force: 9 November 2005
and the following amendments included by the Department of Infrastructure and Transport:
Erratum to the 01 series of amendments;
Corrigendum 1 to the 01 series of amendments, subject of Depositary Notification C.N.1151.2006 TREATIES-1 dated 13 December 2006;
Corrigendum 2 to the 01 series of amendments, subject of Depositary Notification C.N.553.2007 TREATIES-1 dated 10 May 2007;
Supplement 1 to the series 01 of the Regulation - Date of entry into force: 15 October 2008
02 series of amendments to the Regulation: Date of entry into force: 19 August 2010
UNIFORM TECHNICAL PRESCRIPTIONS CONCERNING THE APPROVAL OF LARGE PASSENGER VEHICLES WITH REGARD TO THE STRENGTH OF THEIR SUPERSTRUCTURE
Image unavailable in extracted text
_________
UNITED NATIONS